Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, especially in a V-shaped engine configuration.

The V35A-FTS engine might experience turbocharger problems, leading to reduced power and efficiency.

High oil consumption can be an issue, possibly due to worn piston rings or valve seals, common in engines with direct injection.

V-shaped engines like the V35A-FTS may face timing chain wear, leading to potential engine misalignment and performance issues.

Overheating problems can occur due to radiator or coolant leaks, especially in high-performance engines like this one.

Direct and port fuel injection setups can suffer from fuel contamination, leading to clogged injectors and reduced engine performance.

DBS system might face sensor or calibration issues, leading to ineffective braking support.

EGR valve problems can cause rough idling and decreased fuel efficiency in complex engine setups like the V35A-FTS.

Direct injection engines are prone to carbon build-up on intake valves, which can lead to reduced engine performance.

A common issue with V-shaped engines, especially those with high horsepower, is that they can overheat under heavy load or high temperatures.

The V35A-FTS engine is turbocharged, which can lead to issues such as bearing failure, oil leaks, or compressor surge if not maintained properly.

The PORT+DIRECT injection system can cause carbon buildup on intake valves over time, potentially leading to performance issues.

While the Dynamic Brake Support (DBS) is standard, under extreme conditions such as towing or steep descents, the brakes can still overheat and fade.

V-shaped engines with complex timing systems can sometimes suffer from timing chain stretch or failure, leading to engine performance issues.

Direct injection systems can have problems with fuel injectors, such as clogging or failure, affecting engine performance and efficiency.

DBS systems can sometimes fail to engage properly, leading to reduced braking assistance when needed.

Misfires in a V-shaped engine configuration can be due to issues with spark plugs, fuel injectors, or ignition coils.

V-shaped engines, especially with a high horsepower rating (389 hp), can produce more noise if there are issues with the exhaust system or engine mounts.

The combination of a high-performance engine and a V-shaped configuration can lead to lower fuel efficiency, especially if the engine is not properly tuned.

Problems with the port and direct fuel injection system can trigger the check engine light due to issues such as clogged injectors or fuel pump failure.

V-shaped engines can sometimes face cooling issues if the cooling system is not maintained properly, leading to overheating.

High-performance engines like the V35AFTS may consume more oil, especially if there are leaks or if the engine is not well-maintained.

Problems with the turbocharger or supercharger (if equipped) can result in a noticeable loss of power in the engine.

Imbalance in a V-shaped engine can cause increased vibrations, which can be felt throughout the vehicle.

Faulty sensors or issues with the catalytic converter can lead to increased exhaust emissions, potentially failing emissions tests.

A common issue with V-shaped engines, especially those with high horsepower, is that they can overheat under heavy load or high temperatures.

The V35A-FTS engine is turbocharged, which can lead to issues such as bearing failure, oil leaks, or compressor surge if not maintained properly.

The PORT+DIRECT injection system can cause carbon buildup on intake valves over time, potentially leading to performance issues.

While the Dynamic Brake Support (DBS) is standard, under extreme conditions such as towing or steep descents, the brakes can still overheat and fade.

V-shaped engines with complex timing systems can sometimes suffer from timing chain stretch or failure, leading to engine performance issues.

Direct injection systems can have problems with fuel injectors, such as clogging or failure, affecting engine performance and efficiency.

Misfires can be caused by faulty spark plugs, ignition coils, or fuel injectors. This can result in poor engine performance and increased emissions.

Common in V-shaped engines, oil leaks can occur due to worn gaskets, seals, or oil pan issues. This can lead to low oil levels and potential engine damage.

Problems with the fuel injection system, such as clogged injectors or a faulty fuel pump, can affect engine performance and fuel efficiency.

The V35A-FTS engine may experience overheating due to issues with the cooling system, such as a malfunctioning radiator, water pump, or thermostat.

Various sensor failures (oxygen sensor, mass air flow sensor, etc.) or emissions-related issues can trigger the check engine light.

As a turbocharged engine, the V35A-FTS may encounter issues with the turbocharger, such as boost pressure loss, oil contamination, or turbo lag.

Over time, the timing chain may stretch or wear out, leading to poor engine timing and performance issues.

Direct injection engines like the V35A-FTS can suffer from carbon build-up on intake valves, leading to reduced performance and efficiency.

Modern engines with multiple electronic components can experience battery drain or electrical issues, affecting engine start and operation.

Issues such as exhaust leaks, faulty catalytic converters, or muffler problems can affect engine performance and emissions.

V-shaped engines, like the V35A-FTS in the 2023 Toyota Sequoia, can sometimes overheat due to their compact design, which may restrict airflow and cooling.

The "PORT+DIRECT" fuel injection system and turbocharging in the V35A-FTS can lead to turbo lag or failure if not properly maintained.

The combination of port and direct fuel injection systems increases the complexity of maintenance and potential repair costs.

Direct injection engines are prone to carbon build-up on intake valves, which can affect performance and efficiency over time.

High-performance engines like the V35A-FTS may experience engine knock, especially if lower-octane fuel is used.

Over time, the timing chain in V-shaped engines can wear out, leading to potential engine timing issues and costly repairs.

High horsepower engines like the V35A-FTS can be less fuel-efficient, leading to higher fuel costs.

The presence of a turbocharger can sometimes result in a delay in power delivery, known as turbo lag.

Modern engines with advanced electronic systems, like the DBS in the 2023 Sequoia, can experience sensor or software malfunctions.

High-performance engines can put extra strain on the exhaust system, leading to potential failures or increased emissions.

A common issue with V-shaped engines, especially those with high horsepower, is that they can overheat under heavy load or high temperatures.

The V35A-FTS engine is turbocharged, which can lead to issues such as bearing failure, oil leaks, or compressor surge if not maintained properly.

The PORT+DIRECT injection system can cause carbon buildup on intake valves over time, potentially leading to performance issues.

While the Dynamic Brake Support (DBS) is standard, under extreme conditions such as towing or steep descents, the brakes can still overheat and fade.

V-shaped engines with complex timing systems can sometimes suffer from timing chain stretch or failure, leading to engine performance issues.

Direct injection systems can have problems with fuel injectors, such as clogging or failure, affecting engine performance and efficiency.

DBS systems can sometimes fail to engage properly, leading to reduced braking assistance when needed.

Misfires in a V-shaped engine configuration can be due to issues with spark plugs, fuel injectors, or ignition coils.

V-shaped engines, especially with a high horsepower rating (389 hp), can produce more noise if there are issues with the exhaust system or engine mounts.

The combination of a high-performance engine and a V-shaped configuration can lead to lower fuel efficiency, especially if the engine is not properly tuned.

Problems with the port and direct fuel injection system can trigger the check engine light due to issues such as clogged injectors or fuel pump failure.

V-shaped engines can sometimes face cooling issues if the cooling system is not maintained properly, leading to overheating.

High-performance engines like the V35AFTS may consume more oil, especially if there are leaks or if the engine is not well-maintained.

Problems with the turbocharger or supercharger (if equipped) can result in a noticeable loss of power in the engine.

Imbalance in a V-shaped engine can cause increased vibrations, which can be felt throughout the vehicle.

Faulty sensors or issues with the catalytic converter can lead to increased exhaust emissions, potentially failing emissions tests.

DBS systems can sometimes fail to engage properly, leading to reduced braking assistance when needed.

Misfires in a V-shaped engine configuration can be due to issues with spark plugs, fuel injectors, or ignition coils.

V-shaped engines, especially with a high horsepower rating (389 hp), can produce more noise if there are issues with the exhaust system or engine mounts.

The combination of a high-performance engine and a V-shaped configuration can lead to lower fuel efficiency, especially if the engine is not properly tuned.

Problems with the port and direct fuel injection system can trigger the check engine light due to issues such as clogged injectors or fuel pump failure.

V-shaped engines can sometimes face cooling issues if the cooling system is not maintained properly, leading to overheating.

High-performance engines like the V35AFTS may consume more oil, especially if there are leaks or if the engine is not well-maintained.

Problems with the turbocharger or supercharger (if equipped) can result in a noticeable loss of power in the engine.

Imbalance in a V-shaped engine can cause increased vibrations, which can be felt throughout the vehicle.

Faulty sensors or issues with the catalytic converter can lead to increased exhaust emissions, potentially failing emissions tests.