Dynamic Brake Support (DBS) systems, while helpful, can sometimes malfunction or fail to activate properly, resulting in reduced braking efficiency.

With a naturally aspirated engine, there can be performance issues such as loss of power or inconsistent acceleration, especially if the engine is not properly maintained.

The varying engine brake horsepower (200-205 hp) might lead to inconsistent engine braking performance, particularly noticeable during manual and automatic transmission shifts.

A 4-cylinder engine, if not well-maintained, can experience cylinder misfires, leading to rough idling, reduced power, and increased fuel consumption.

As a 2018 model, general wear and tear could affect various engine components, requiring regular maintenance to ensure optimal performance.

Naturally aspirated engines generally have lower power output compared to turbocharged engines, which might not meet performance expectations for some drivers.

DBS systems can sometimes fail to activate correctly, leading to insufficient braking support during emergencies.

High-performance engines, particularly those with turbochargers, are prone to overheating if not adequately maintained.

A four-cylinder engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors.

Some Toyota engines are known for consuming more oil than expected, which can lead to low oil levels and potential engine damage.

The 228 hp engine may exhibit knocking sounds due to improper fuel combustion, often caused by low-quality fuel or carbon buildup.

Over time, the timing chain or belt can wear out, leading to poor engine performance or even catastrophic failure if it breaks.

Fuel pump or fuel filter issues can lead to poor engine performance, starting problems, or stalling.

The ECU can sometimes malfunction, leading to various engine performance issues and diagnostic trouble codes.

Misfires in the engine can be caused by various factors including faulty spark plugs, ignition coils, or fuel injectors. This can lead to poor engine performance and reduced fuel efficiency.

Higher-than-normal oil consumption can be a common issue, possibly due to worn piston rings or valve seals, leading to reduced engine performance and potential damage if not addressed.

This can be caused by using the wrong type of fuel, poor engine timing, or issues with the engine's internals such as the bearings or pistons.

Overheating can be due to a malfunctioning cooling system, such as a faulty radiator, thermostat, or water pump, which can lead to serious engine damage if not resolved promptly.

Problems with the timing chain or belt can lead to engine timing issues, which can cause poor performance or even engine failure if the belt or chain breaks.

Issues with the fuel pump or fuel injectors can cause poor engine performance, stalling, or difficulty starting the vehicle.

Problems with the exhaust system, such as a clogged catalytic converter or damaged oxygen sensors, can affect engine performance and emissions.

Issues with the engine's electrical system, such as a faulty alternator or battery, can lead to starting problems or intermittent electrical failures.

Malfunctioning sensors (e.g., mass airflow sensor, oxygen sensor) can lead to incorrect air-fuel mixture, resulting in poor engine performance and increased emissions.

Overheating of the braking system can reduce braking efficiency, especially during extended use.

Dynamic Brake Support (DBS) relies on sensors that can malfunction, leading to improper activation or failure of the system.

Given the high horsepower (228 hp) and performance nature of the GR86, the engine can overheat if cooling systems are inadequate.

Some Toyota engines have been known to consume more oil than expected, which can lead to engine wear if not monitored.

With 4 cylinders, any misfire can significantly impact performance and fuel efficiency.

Timing chain wear or failure can lead to engine performance problems and potential engine damage.

Dirty or faulty fuel injectors can lead to poor engine performance and reduced fuel efficiency.

With a performance-oriented car like the GR86, aggressive driving can lead to premature clutch wear.

Overheating of the braking system can reduce braking efficiency, especially during extended use.

Dynamic Brake Support (DBS) relies on sensors that can malfunction, leading to improper activation or failure of the system.

Given the high horsepower (228 hp) and performance nature of the GR86, the engine can overheat if cooling systems are inadequate.

Some Toyota engines have been known to consume more oil than expected, which can lead to engine wear if not monitored.

With 4 cylinders, any misfire can significantly impact performance and fuel efficiency.

Timing chain wear or failure can lead to engine performance problems and potential engine damage.

Dirty or faulty fuel injectors can lead to poor engine performance and reduced fuel efficiency.

With a performance-oriented car like the GR86, aggressive driving can lead to premature clutch wear.

DBS systems can sometimes fail to activate correctly, leading to insufficient braking support during emergencies.

High-performance engines, particularly those with turbochargers, are prone to overheating if not adequately maintained.

A four-cylinder engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors.

Some Toyota engines are known for consuming more oil than expected, which can lead to low oil levels and potential engine damage.

The 228 hp engine may exhibit knocking sounds due to improper fuel combustion, often caused by low-quality fuel or carbon buildup.

Over time, the timing chain or belt can wear out, leading to poor engine performance or even catastrophic failure if it breaks.

Fuel pump or fuel filter issues can lead to poor engine performance, starting problems, or stalling.

The ECU can sometimes malfunction, leading to various engine performance issues and diagnostic trouble codes.

The Dynamic Brake Support system may experience issues such as sensor malfunctions, software glitches, or calibration errors. This can result in the system not engaging properly during emergency braking situations.

The engine brake may not provide the expected deceleration force, which can be due to issues like exhaust valve problems, vacuum leaks, or control module faults.

Common in 4-cylinder engines, misfires can be caused by problems such as faulty spark plugs, ignition coils, fuel injectors, or issues with the engine control unit (ECU).

Naturally aspirated engines can develop oil leaks over time, which may originate from the valve cover gasket, oil pan gasket, or other engine seals.

The engine may overheat due to cooling system failures, such as a malfunctioning thermostat, radiator problems, or a failing water pump.

The CEL can be triggered by a range of issues, from minor sensor faults to more serious engine component failures, requiring diagnostic scans to identify the root cause.

Problems with the exhaust system, such as catalytic converter failure, exhaust manifold leaks, or muffler issues, can affect engine performance and emissions.

If the vehicle experiences a noticeable decrease in fuel efficiency, it could be due to clogged air filters, dirty fuel injectors, or issues with the fuel delivery system.

Over time, the timing chain or belt may wear out or stretch, leading to poor engine performance, misfires, or even engine damage if not addressed promptly.

Although not directly related to the engine, the transmission can affect engine performance, especially if there are issues with the automatic transmission (AT) or manual transmission (MT) clutch and gear systems.

The Dynamic Brake Support system may fail to activate correctly, leading to reduced braking performance or failure to assist during emergency braking situations.

A misfire in one or more of the cylinders can occur due to issues such as spark plug failure, ignition coil problems, or fuel injector faults.

Overheating can arise from a malfunctioning cooling system, such as a faulty thermostat, radiator issues, or low coolant levels.

Oil leaks may occur from gaskets, seals, or the oil pan, leading to decreased engine lubrication and potential damage.

Problems with the timing chain or belt can cause the engine to run poorly, misfire, or even suffer severe damage if the timing is off.

Issues within the fuel system, such as a clogged fuel filter, failing fuel pump, or dirty fuel injectors, can lead to poor engine performance.

Leaks or blockages in the exhaust system can cause performance issues, increased emissions, or unusual noises.

Leaks in the intake manifold can lead to engine performance problems and reduced efficiency due to improper air-fuel mixture.

Malfunctions in the Engine Control Unit (ECU) or associated sensors can lead to various engine performance issues, including poor fuel economy and power loss.

DBS systems can sometimes fail to activate correctly, leading to insufficient braking support during emergencies.

High-performance engines, particularly those with turbochargers, are prone to overheating if not adequately maintained.

A four-cylinder engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors.

Some Toyota engines are known for consuming more oil than expected, which can lead to low oil levels and potential engine damage.

The 228 hp engine may exhibit knocking sounds due to improper fuel combustion, often caused by low-quality fuel or carbon buildup.

Over time, the timing chain or belt can wear out, leading to poor engine performance or even catastrophic failure if it breaks.

Fuel pump or fuel filter issues can lead to poor engine performance, starting problems, or stalling.

The ECU can sometimes malfunction, leading to various engine performance issues and diagnostic trouble codes.

A misfire can occur due to issues with spark plugs, ignition coils, or fuel injectors, leading to rough idling or loss of power.

Over time, seals and gaskets may wear out, causing oil leaks which can lead to engine damage if not addressed.

Problems with the timing chain or belt can cause engine performance issues and, in severe cases, engine failure.

Issues such as clogged fuel filters or failing fuel pumps can result in poor engine performance or stalling.

A malfunctioning radiator, water pump, or thermostat can cause the engine to overheat, potentially leading to severe engine damage.

Malfunctions in sensors like the oxygen sensor or mass airflow sensor can cause poor fuel economy and performance issues.

If the engine is turbocharged, problems such as oil contamination or bearing wear can lead to reduced engine performance or failure.

The valve cover gasket may wear out, causing oil leaks that can lead to reduced engine performance or damage.

DBS systems can sometimes fail to activate correctly, leading to insufficient braking support during emergencies.

High-performance engines, particularly those with turbochargers, are prone to overheating if not adequately maintained.

A four-cylinder engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors.

Some Toyota engines are known for consuming more oil than expected, which can lead to low oil levels and potential engine damage.

The 228 hp engine may exhibit knocking sounds due to improper fuel combustion, often caused by low-quality fuel or carbon buildup.

Over time, the timing chain or belt can wear out, leading to poor engine performance or even catastrophic failure if it breaks.

Fuel pump or fuel filter issues can lead to poor engine performance, starting problems, or stalling.

The ECU can sometimes malfunction, leading to various engine performance issues and diagnostic trouble codes.

A misfire can occur due to issues with spark plugs, ignition coils, or fuel injectors, leading to rough idling or loss of power.

Over time, seals and gaskets may wear out, causing oil leaks which can lead to engine damage if not addressed.

Problems with the timing chain or belt can cause engine performance issues and, in severe cases, engine failure.

Issues such as clogged fuel filters or failing fuel pumps can result in poor engine performance or stalling.

A malfunctioning radiator, water pump, or thermostat can cause the engine to overheat, potentially leading to severe engine damage.

Malfunctions in sensors like the oxygen sensor or mass airflow sensor can cause poor fuel economy and performance issues.

If the engine is turbocharged, problems such as oil contamination or bearing wear can lead to reduced engine performance or failure.

The valve cover gasket may wear out, causing oil leaks that can lead to reduced engine performance or damage.

DBS systems can sometimes fail to activate correctly, leading to insufficient braking support during emergencies.

High-performance engines, particularly those with turbochargers, are prone to overheating if not adequately maintained.

A four-cylinder engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors.

Some Toyota engines are known for consuming more oil than expected, which can lead to low oil levels and potential engine damage.

The 228 hp engine may exhibit knocking sounds due to improper fuel combustion, often caused by low-quality fuel or carbon buildup.

Over time, the timing chain or belt can wear out, leading to poor engine performance or even catastrophic failure if it breaks.

Fuel pump or fuel filter issues can lead to poor engine performance, starting problems, or stalling.

The ECU can sometimes malfunction, leading to various engine performance issues and diagnostic trouble codes.

The Dynamic Brake Support system may fail to activate correctly, leading to reduced braking performance or failure to assist during emergency braking situations.

A misfire in one or more of the cylinders can occur due to issues such as spark plug failure, ignition coil problems, or fuel injector faults.

Overheating can arise from a malfunctioning cooling system, such as a faulty thermostat, radiator issues, or low coolant levels.

Oil leaks may occur from gaskets, seals, or the oil pan, leading to decreased engine lubrication and potential damage.

Problems with the timing chain or belt can cause the engine to run poorly, misfire, or even suffer severe damage if the timing is off.

Issues within the fuel system, such as a clogged fuel filter, failing fuel pump, or dirty fuel injectors, can lead to poor engine performance.

Leaks or blockages in the exhaust system can cause performance issues, increased emissions, or unusual noises.

Leaks in the intake manifold can lead to engine performance problems and reduced efficiency due to improper air-fuel mixture.

Malfunctions in the Engine Control Unit (ECU) or associated sensors can lead to various engine performance issues, including poor fuel economy and power loss.

Misfires in the engine can be caused by various factors including faulty spark plugs, ignition coils, or fuel injectors. This can lead to poor engine performance and reduced fuel efficiency.

Higher-than-normal oil consumption can be a common issue, possibly due to worn piston rings or valve seals, leading to reduced engine performance and potential damage if not addressed.

This can be caused by using the wrong type of fuel, poor engine timing, or issues with the engine's internals such as the bearings or pistons.

Overheating can be due to a malfunctioning cooling system, such as a faulty radiator, thermostat, or water pump, which can lead to serious engine damage if not resolved promptly.

Problems with the timing chain or belt can lead to engine timing issues, which can cause poor performance or even engine failure if the belt or chain breaks.

Issues with the fuel pump or fuel injectors can cause poor engine performance, stalling, or difficulty starting the vehicle.

Problems with the exhaust system, such as a clogged catalytic converter or damaged oxygen sensors, can affect engine performance and emissions.

Issues with the engine's electrical system, such as a faulty alternator or battery, can lead to starting problems or intermittent electrical failures.

Malfunctioning sensors (e.g., mass airflow sensor, oxygen sensor) can lead to incorrect air-fuel mixture, resulting in poor engine performance and increased emissions.

DBS systems can sometimes fail to activate correctly, leading to insufficient braking support during emergencies.

High-performance engines, particularly those with turbochargers, are prone to overheating if not adequately maintained.

A four-cylinder engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors.

Some Toyota engines are known for consuming more oil than expected, which can lead to low oil levels and potential engine damage.

The 228 hp engine may exhibit knocking sounds due to improper fuel combustion, often caused by low-quality fuel or carbon buildup.

Over time, the timing chain or belt can wear out, leading to poor engine performance or even catastrophic failure if it breaks.

Fuel pump or fuel filter issues can lead to poor engine performance, starting problems, or stalling.

The ECU can sometimes malfunction, leading to various engine performance issues and diagnostic trouble codes.

The 2022 TOYOTA GR86's 4-cylinder engine is known to consume more oil than expected, which can lead to more frequent oil changes and potential engine damage if not monitored.

Some users have reported issues with the fuel pump, leading to stalling or a failure to start.

There have been instances of engine knocking, which could be due to improper fuel or ignition timing issues.

Problems with the electronic throttle control system can cause unexpected acceleration or deceleration.

Although DBS is standard, there can be occasional malfunctions leading to inconsistent braking performance.

The timing chain can become loose or worn over time, leading to engine performance issues or failure.

DBS systems can sometimes fail to activate correctly, leading to insufficient braking support during emergencies.

High-performance engines, particularly those with turbochargers, are prone to overheating if not adequately maintained.

A four-cylinder engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors.

Some Toyota engines are known for consuming more oil than expected, which can lead to low oil levels and potential engine damage.

The 228 hp engine may exhibit knocking sounds due to improper fuel combustion, often caused by low-quality fuel or carbon buildup.

Over time, the timing chain or belt can wear out, leading to poor engine performance or even catastrophic failure if it breaks.

Fuel pump or fuel filter issues can lead to poor engine performance, starting problems, or stalling.

The ECU can sometimes malfunction, leading to various engine performance issues and diagnostic trouble codes.

Misfires in the engine can be caused by various factors including faulty spark plugs, ignition coils, or fuel injectors. This can lead to poor engine performance and reduced fuel efficiency.

Higher-than-normal oil consumption can be a common issue, possibly due to worn piston rings or valve seals, leading to reduced engine performance and potential damage if not addressed.

This can be caused by using the wrong type of fuel, poor engine timing, or issues with the engine's internals such as the bearings or pistons.

Overheating can be due to a malfunctioning cooling system, such as a faulty radiator, thermostat, or water pump, which can lead to serious engine damage if not resolved promptly.

Problems with the timing chain or belt can lead to engine timing issues, which can cause poor performance or even engine failure if the belt or chain breaks.

Issues with the fuel pump or fuel injectors can cause poor engine performance, stalling, or difficulty starting the vehicle.

Problems with the exhaust system, such as a clogged catalytic converter or damaged oxygen sensors, can affect engine performance and emissions.

Issues with the engine's electrical system, such as a faulty alternator or battery, can lead to starting problems or intermittent electrical failures.

Malfunctioning sensors (e.g., mass airflow sensor, oxygen sensor) can lead to incorrect air-fuel mixture, resulting in poor engine performance and increased emissions.

Misfires in the engine can be caused by various factors including faulty spark plugs, ignition coils, or fuel injectors. This can lead to poor engine performance and reduced fuel efficiency.

Higher-than-normal oil consumption can be a common issue, possibly due to worn piston rings or valve seals, leading to reduced engine performance and potential damage if not addressed.

This can be caused by using the wrong type of fuel, poor engine timing, or issues with the engine's internals such as the bearings or pistons.

Overheating can be due to a malfunctioning cooling system, such as a faulty radiator, thermostat, or water pump, which can lead to serious engine damage if not resolved promptly.

Problems with the timing chain or belt can lead to engine timing issues, which can cause poor performance or even engine failure if the belt or chain breaks.

Issues with the fuel pump or fuel injectors can cause poor engine performance, stalling, or difficulty starting the vehicle.

Problems with the exhaust system, such as a clogged catalytic converter or damaged oxygen sensors, can affect engine performance and emissions.

Issues with the engine's electrical system, such as a faulty alternator or battery, can lead to starting problems or intermittent electrical failures.

Malfunctioning sensors (e.g., mass airflow sensor, oxygen sensor) can lead to incorrect air-fuel mixture, resulting in poor engine performance and increased emissions.

Misfires in the engine can be caused by various factors including faulty spark plugs, ignition coils, or fuel injectors. This can lead to poor engine performance and reduced fuel efficiency.

Higher-than-normal oil consumption can be a common issue, possibly due to worn piston rings or valve seals, leading to reduced engine performance and potential damage if not addressed.

This can be caused by using the wrong type of fuel, poor engine timing, or issues with the engine's internals such as the bearings or pistons.

Overheating can be due to a malfunctioning cooling system, such as a faulty radiator, thermostat, or water pump, which can lead to serious engine damage if not resolved promptly.

Problems with the timing chain or belt can lead to engine timing issues, which can cause poor performance or even engine failure if the belt or chain breaks.

Issues with the fuel pump or fuel injectors can cause poor engine performance, stalling, or difficulty starting the vehicle.

Problems with the exhaust system, such as a clogged catalytic converter or damaged oxygen sensors, can affect engine performance and emissions.

Issues with the engine's electrical system, such as a faulty alternator or battery, can lead to starting problems or intermittent electrical failures.

Malfunctioning sensors (e.g., mass airflow sensor, oxygen sensor) can lead to incorrect air-fuel mixture, resulting in poor engine performance and increased emissions.

DBS systems can sometimes fail to activate correctly, leading to insufficient braking support during emergencies.

High-performance engines, particularly those with turbochargers, are prone to overheating if not adequately maintained.

A four-cylinder engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors.

Some Toyota engines are known for consuming more oil than expected, which can lead to low oil levels and potential engine damage.

The 228 hp engine may exhibit knocking sounds due to improper fuel combustion, often caused by low-quality fuel or carbon buildup.

Over time, the timing chain or belt can wear out, leading to poor engine performance or even catastrophic failure if it breaks.

Fuel pump or fuel filter issues can lead to poor engine performance, starting problems, or stalling.

The ECU can sometimes malfunction, leading to various engine performance issues and diagnostic trouble codes.

The 2022 TOYOTA GR86's 4-cylinder engine is known to consume more oil than expected, which can lead to more frequent oil changes and potential engine damage if not monitored.

Some users have reported issues with the fuel pump, leading to stalling or a failure to start.

There have been instances of engine knocking, which could be due to improper fuel or ignition timing issues.

Problems with the electronic throttle control system can cause unexpected acceleration or deceleration.

Although DBS is standard, there can be occasional malfunctions leading to inconsistent braking performance.

The timing chain can become loose or worn over time, leading to engine performance issues or failure.

The Dynamic Brake Support (DBS) system may sometimes fail to activate or may activate unexpectedly, leading to potential safety issues.

The 4-cylinder engine could experience excessive vibration, especially if engine mounts wear out or if the engine is not properly balanced.

Subaru engines are known to sometimes have higher oil consumption, which could require more frequent oil checks and top-ups.

Depending on the specific engine model used, there could be issues with the timing belt or chain, potentially leading to engine performance problems.

Some users report that the fuel efficiency of the Crosstrek may not meet expectations, which could lead to higher fuel costs over time.

There can be occasional issues with the vehicle’s electrical systems, such as battery drainage or malfunctioning sensors.

Some owners experience issues with the continuously variable transmission (CVT), including hesitation, shuddering, or unexpected shifting.

Misfires in the engine can be caused by various factors including faulty spark plugs, ignition coils, or fuel injectors. This can lead to poor engine performance and reduced fuel efficiency.

Higher-than-normal oil consumption can be a common issue, possibly due to worn piston rings or valve seals, leading to reduced engine performance and potential damage if not addressed.

This can be caused by using the wrong type of fuel, poor engine timing, or issues with the engine's internals such as the bearings or pistons.

Overheating can be due to a malfunctioning cooling system, such as a faulty radiator, thermostat, or water pump, which can lead to serious engine damage if not resolved promptly.

Problems with the timing chain or belt can lead to engine timing issues, which can cause poor performance or even engine failure if the belt or chain breaks.

Issues with the fuel pump or fuel injectors can cause poor engine performance, stalling, or difficulty starting the vehicle.

Problems with the exhaust system, such as a clogged catalytic converter or damaged oxygen sensors, can affect engine performance and emissions.

Issues with the engine's electrical system, such as a faulty alternator or battery, can lead to starting problems or intermittent electrical failures.

Malfunctioning sensors (e.g., mass airflow sensor, oxygen sensor) can lead to incorrect air-fuel mixture, resulting in poor engine performance and increased emissions.