Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Hydraulic brake systems are prone to brake fluid leaks which can reduce braking efficiency and create a spongy brake pedal feel.

Over time, brake pads and rotors wear down, leading to reduced braking performance and potentially causing squeaking or grinding noises.

The Anti-lock Braking System (ABS) can sometimes malfunction, leading to warning lights on the dashboard and reduced brake control during hard stops.

The master cylinder in hydraulic brake systems can fail, leading to a loss of brake pressure and ineffective braking.

Prolonged use in heavy braking conditions can cause brake fade, where the brakes lose effectiveness due to overheating.

Components in the brake system, such as brake lines and calipers, can corrode, especially in regions with harsh weather conditions, leading to leaks and reduced performance.

Air can enter the hydraulic brake lines, causing a spongy brake pedal and reduced braking power.

Brake calipers can sometimes stick, causing uneven braking and increased wear on the brake pads and rotors.

Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to reduced braking performance.

Air in the hydraulic lines can cause the brake pedal to feel soft or spongy, indicating the need for bleeding the brake system.

During prolonged braking, such as driving downhill, the brakes can overheat, leading to reduced braking power.

Continuous heavy braking can cause the brake rotors to warp, leading to vibrations when braking.

Over time, brake pads wear down and need replacing to maintain effective braking.

The Anti-lock Braking System (ABS) can fail due to sensor issues or problems with the ABS module.

Contaminants in the brake fluid can cause corrosion and damage to the brake system components.

Faulty brake light switches or wiring problems can cause the brake lights to malfunction.

This can be caused by uneven wear of brake pads or issues with the brake calipers or hydraulic lines.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or brake calipers, leading to reduced braking efficiency and potential brake failure.

Overheating of the brake components, especially under heavy usage, can cause a reduction in braking power, known as brake fade.

Air trapped in the hydraulic brake lines or a failing master cylinder can cause the brake pedal to feel spongy or soft, reducing braking responsiveness.

Worn-out brake pads or rotors can cause squeaking, grinding, or other noises during braking, indicating the need for maintenance or replacement.

The Anti-lock Braking System (ABS) sensors or control module can fail, causing the ABS warning light to come on and potentially affecting the system's performance.

Excessive heat and aggressive braking can warp the brake rotors, leading to vibrations or pulsations felt through the brake pedal during braking.

Standard wear and tear can cause brake pads to thin out, reducing their effectiveness and requiring regular inspection and replacement.

Corrosion or debris can cause brake calipers to stick, leading to uneven braking and potential damage to the brake components.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Hydraulic brake systems rely on brake fluid, and any leak in the system can lead to decreased braking performance or complete brake failure.

Air bubbles in the hydraulic brake lines can cause a spongy brake pedal and reduce the effectiveness of the brakes.

Over time, brake pads wear down and need to be replaced to maintain effective braking.

Excessive heat and stress can cause brake rotors to warp, leading to vibration and reduced braking efficiency.

Sticking or malfunctioning brake calipers can cause uneven braking and increased wear on brake pads and rotors.

The master cylinder is crucial for generating the hydraulic pressure needed for braking. Any malfunction can lead to a loss of braking power.

A faulty ABS sensor can trigger the anti-lock braking system warning light and impair the vehicle's ability to prevent wheel lockup during hard braking.

Corrosion in brake lines can weaken them, increasing the risk of leaks and brake failure.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to reduced braking performance.

Over time, brake pads and discs wear out and need to be replaced to maintain effective braking.

Calipers can seize or develop other faults, leading to uneven braking and potential safety risks.

Standard Dynamic Brake Support (DBS) may experience issues with sensors or the control module, leading to ABS warnings or reduced functionality.

The V-shaped FCA engine with 6 cylinders could experience misfires due to ignition system or fuel delivery problems.

Common in V-shaped engines due to gasket failures or seal issues.

The V-shaped configuration can sometimes lead to uneven cooling, potentially causing overheating.

Fuel injectors can become clogged or fail, leading to poor engine performance.

The Jeep Wrangler may experience transmission problems such as slipping or hard shifting, especially under heavy use.

Modern vehicles, including the 2020 Jeep Wrangler, often face issues with electronic components and sensors, leading to various warning lights and potential system malfunctions.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Hydraulic brake systems rely on brake fluid to function. Leaks can lead to decreased braking efficiency and potential brake failure.

Overheating of the brake components, especially in heavy braking conditions like downhill driving, can reduce braking power.

Standard Dynamic Brake Support (DBS) may experience issues with the Anti-lock Braking System (ABS) sensors or control modules, leading to reduced braking effectiveness.

Regular wear and tear of brake pads can lead to reduced braking performance and increased stopping distances.

Repeated heavy braking or exposure to excessive heat can cause brake rotors to warp, leading to vibrations or pulsations when braking.

The in-line 4-cylinder engine can be prone to overheating if the cooling system is not maintained properly.

If equipped with a turbocharger, it may face problems like oil leaks or bearing failures, affecting engine performance.

Common in 4-cylinder engines, misfires can be caused by issues with ignition coils, spark plugs, or fuel injectors.

The engine may consume more oil than usual, leading to low oil levels and potential engine damage if not monitored.

Problems with the timing chain or belt can lead to engine performance issues or even engine failure if they break.

The Jeep Wrangler is often used in off-road conditions, which can lead to accelerated wear of suspension components.

Modern vehicles, including the 2019 Jeep Wrangler, may face electrical system problems affecting various components like lights, sensors, or the infotainment system.

Issues with the transmission system can arise, such as shifting difficulties or transmission fluid leaks.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Hydraulic brake systems are prone to leaks, which can lead to a loss of braking power and increased stopping distances.

Standard Dynamic Brake Support (DBS) may not be sufficient in extreme conditions, causing the brakes to overheat and lose effectiveness.

The V-shaped 6-cylinder engine can sometimes experience misfires due to faulty spark plugs, ignition coils, or fuel injectors.

The V-shaped configuration might have oil leaks at the valve covers or oil pan gasket, which can lead to low oil levels and potential engine damage.

This engine might overheat due to issues with the cooling system, such as a failing water pump, blocked radiator, or malfunctioning thermostat.

The 285 hp engine may suffer from timing chain problems, which can lead to poor engine performance or catastrophic engine failure if not addressed.

FCA engines sometimes have electrical issues that can affect engine performance, including faulty sensors or wiring problems.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Hydraulic brake systems are prone to brake fluid leaks which can reduce braking efficiency and create a spongy brake pedal feel.

Over time, brake pads and rotors wear down, leading to reduced braking performance and potentially causing squeaking or grinding noises.

The Anti-lock Braking System (ABS) can sometimes malfunction, leading to warning lights on the dashboard and reduced brake control during hard stops.

The master cylinder in hydraulic brake systems can fail, leading to a loss of brake pressure and ineffective braking.

Prolonged use in heavy braking conditions can cause brake fade, where the brakes lose effectiveness due to overheating.

Components in the brake system, such as brake lines and calipers, can corrode, especially in regions with harsh weather conditions, leading to leaks and reduced performance.

Air can enter the hydraulic brake lines, causing a spongy brake pedal and reduced braking power.

Brake calipers can sometimes stick, causing uneven braking and increased wear on the brake pads and rotors.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.

Leaks in the hydraulic brake system can lead to reduced braking efficiency and increased stopping distances.

Over time, brake pads wear down and need to be replaced to ensure proper braking performance.

Warped or worn brake rotors can cause vibrations and reduced braking effectiveness.

Air in the hydraulic brake lines can lead to a spongy brake pedal and decreased braking power.

Issues with the Dynamic Brake Support system can result in delayed or insufficient braking assistance during rapid braking.

Issues with the V-shaped, 6-cylinder engine such as faulty spark plugs or ignition coils can cause misfires, leading to reduced performance and fuel efficiency.

Common with FCA engines, oil leaks can occur from various seals and gaskets, leading to potential engine damage if not addressed.

Leaks in the cooling system can cause the engine to overheat, potentially leading to severe engine damage.

Problems with the timing chain or belt can lead to engine misfires, poor performance, and in severe cases, engine failure.

Issues such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and stalling.

These can cause exhaust leaks, leading to increased engine noise, reduced efficiency, and potential emission failures.