Most Common Car Issues

Selected parameters

Engine Brake (hp) From
116

Add more parameters

MOST COMMON PROBLEMS

MAZDA MX-5 1990

The 1990 Mazda MX-5 is a classic convertible known for its lightweight design and spirited driving experience. Powered by a 1.6L B60 engine, it offers between 116 to 127 hp, providing a fun ride. With its two-door configuration and iconic styling, it's a beloved model among enthusiasts. Manufactured by Mazda Motor Corporation in Hiroshima, Japan, it remains a symbol of driving pleasure.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B60
Engine Number of Cylinders
4

Problems:

Oil leaks
The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.
Overheating
The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.
Timing belt wear
The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.
Fuel injector issues
Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Ignition coil failure
The ignition coils may wear out over time, leading to misfires and reduced engine power.
Exhaust manifold cracks
The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.
Sensor failures
Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.
Egr valve problems
The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.
MAZDA MX-5 1994

The 1994 Mazda MX-5 is a classic convertible known for its sporty design and impressive performance. Powered by a 1.8-liter, 4-cylinder engine producing between 116 to 140 horsepower, this lightweight roadster offers a thrilling driving experience. Manufactured by Mazda Motor Corporation in Hiroshima, Japan, it features driver and passenger airbags for enhanced safety. With its timeless appeal and agile handling, the MX-5 remains a beloved choice among car enthusiasts.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Oil leaks
The 1994 Mazda MX-5, particularly with the BPD engine, is prone to oil leaks, often from the valve cover gasket or oil pan gasket.
Timing belt wear
The timing belt in the BPD engine may wear out or break if not replaced at regular intervals, leading to potential engine damage.
Cooling system issues
The cooling system, including the radiator and water pump, may develop leaks or fail, causing the engine to overheat.
Ignition system problems
Misfires or starting issues can occur due to faulty spark plugs, ignition coils, or the distributor.
Fuel injector problems
Clogged or dirty fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Crankshaft position sensor failure
A faulty crankshaft position sensor can cause the engine to stall or not start at all.
Cylinder head gasket failure
The head gasket can fail, leading to coolant leaks and overheating issues.
Vacuum leaks
Vacuum leaks can cause rough idling, poor acceleration, and decreased fuel economy.
Exhaust manifold cracks
Cracks in the exhaust manifold can lead to exhaust leaks and increased engine noise.
MAZDA MX-5 1991

The 1991 MAZDA MX-5, produced by Mazda Motor Corporation in Hiroshima, Japan, is a classic convertible/cabriolet with a lightweight design. Equipped with a 1.6-liter B6D engine, it delivers between 116 to 127 horsepower, making it a spirited choice for driving enthusiasts. This two-door coupe features manual seat belts and airbags for both front-row occupants, running on gasoline. Its compact size and sporty feel have made it a beloved model among car aficionados.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B6D
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.
Overheating
Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.
Timing belt failure
The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.
Poor fuel efficiency
Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.
Ignition system issues
Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.
Vacuum leaks
Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.
MAZDA MX-5 1994

The 1994 Mazda MX-5 is a stylish convertible, renowned for its agile handling and spirited driving experience. Powered by a 1.8-liter engine producing between 116 to 140 horsepower, this two-door sports car is perfect for those who enjoy open-air motoring. Manufactured by Mazda Motor Corporation in Hiroshima, Japan, it features driver and passenger airbags for added safety. With its lightweight design and classic roadster styling, the MX-5 remains an icon in the world of sports cars.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Oil leaks
The 1994 Mazda MX-5, particularly with the BPD engine, is prone to oil leaks, often from the valve cover gasket or oil pan gasket.
Timing belt wear
The timing belt in the BPD engine may wear out or break if not replaced at regular intervals, leading to potential engine damage.
Cooling system issues
The cooling system, including the radiator and water pump, may develop leaks or fail, causing the engine to overheat.
Ignition system problems
Misfires or starting issues can occur due to faulty spark plugs, ignition coils, or the distributor.
Fuel injector problems
Clogged or dirty fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Crankshaft position sensor failure
A faulty crankshaft position sensor can cause the engine to stall or not start at all.
Cylinder head gasket failure
The head gasket can fail, leading to coolant leaks and overheating issues.
Vacuum leaks
Vacuum leaks can cause rough idling, poor acceleration, and decreased fuel economy.
Exhaust manifold cracks
Cracks in the exhaust manifold can lead to exhaust leaks and increased engine noise.
MAZDA MX-5 1991

The 1991 Mazda MX-5 is a classic convertible known for its sporty design and engaging driving experience. Equipped with a 1.6-liter engine producing between 116 and 127 horsepower, this two-door vehicle offers a fun ride with its lightweight build. Manufactured in Hofu, Japan, the MX-5 is a part of Mazda's renowned lineup of reliable and stylish passenger cars. With its manual seat belts and front airbags, it delivers a basic yet enjoyable driving experience.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B6D
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.
Overheating
Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.
Timing belt failure
The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.
Poor fuel efficiency
Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.
Ignition system issues
Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.
Vacuum leaks
Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.
MAZDA MX-5 1992

The 1992 Mazda MX-5 is a classic convertible, known for its sporty and agile performance. With a 1.6-liter engine producing between 116 to 140 horsepower, this two-door sports car offers a thrilling driving experience. Manufactured in Hiroshima, Japan, the MX-5 combines lightweight design with the reliability of Mazda engineering.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Overheating
The 1992 Mazda MX-5 with the BPD engine may face overheating issues due to an aging cooling system or a failing thermostat.
Oil leaks
Common in older models, oil leaks can occur from gaskets, seals, or the oil pan.
Misfiring
Worn spark plugs, ignition coils, or fuel injectors can cause the engine to misfire.
Timing belt failure
The timing belt may wear out or break, leading to severe engine damage if not replaced at recommended intervals.
Fuel pump issues
An aging fuel pump may fail, leading to poor engine performance or starting problems.
Exhaust manifold cracks
Heat cycles can cause the exhaust manifold to crack, leading to exhaust leaks and reduced engine efficiency.
Valve cover gasket leak
The gasket may degrade over time, causing oil leaks around the valve cover.
MAZDA MX-5 1995

The 1995 Mazda MX-5 is a classic convertible/cabriolet known for its sporty performance and agile handling. Manufactured in Hiroshima by Mazda Motor Corporation, this two-door passenger car features a BPD engine producing between 116 and 140 horsepower. Designed with safety in mind, it includes front airbags for the driver and passenger and manual seat belts. With its lightweight design and fun driving dynamics, the MX-5 remains a popular choice among car enthusiasts.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD

Problems:

Oil leaks
The 1995 Mazda MX-5 with the BPD engine is known to develop oil leaks, particularly from the valve cover gasket and oil pan gasket.
Timing belt wear
The timing belt in this engine needs regular replacement. If neglected, it can wear out, leading to potential engine damage.
Cooling system issues
Radiator and coolant hose leaks are common, which can cause the engine to overheat if not addressed promptly.
Fuel injector problems
Fuel injectors can become clogged or fail, leading to poor engine performance and reduced fuel efficiency.
Ignition system failures
Spark plugs, ignition coils, and the distributor cap can wear out, causing misfires and starting issues.
Exhaust manifold cracks
The exhaust manifold on this engine can develop cracks over time, leading to exhaust leaks and reduced engine performance.
Intake manifold gasket leaks
The intake manifold gasket can deteriorate, causing vacuum leaks that affect engine performance and idle quality.
MAZDA MX-5 1994

The 1994 Mazda MX-5 is a classic convertible known for its lightweight design and spirited performance. Powered by a 1.8-liter, 4-cylinder engine producing between 116 to 140 horsepower, it delivers an engaging driving experience. Manufactured by Mazda Motor Corporation in Hiroshima, Japan, this model is equipped with driver and passenger airbags for safety. With its 2-door layout and iconic design, the MX-5 remains a beloved choice among enthusiasts.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Oil leaks
The 1994 Mazda MX-5, particularly with the BPD engine, is prone to oil leaks, often from the valve cover gasket or oil pan gasket.
Timing belt wear
The timing belt in the BPD engine may wear out or break if not replaced at regular intervals, leading to potential engine damage.
Cooling system issues
The cooling system, including the radiator and water pump, may develop leaks or fail, causing the engine to overheat.
Ignition system problems
Misfires or starting issues can occur due to faulty spark plugs, ignition coils, or the distributor.
Fuel injector problems
Clogged or dirty fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Crankshaft position sensor failure
A faulty crankshaft position sensor can cause the engine to stall or not start at all.
Cylinder head gasket failure
The head gasket can fail, leading to coolant leaks and overheating issues.
Vacuum leaks
Vacuum leaks can cause rough idling, poor acceleration, and decreased fuel economy.
Exhaust manifold cracks
Cracks in the exhaust manifold can lead to exhaust leaks and increased engine noise.
MAZDA MX-5 1990

The 1990 Mazda MX-5 is a classic convertible with a 1.6L inline-4 engine producing between 116 and 127 hp. Manufactured in Hiroshima, Japan, it features dual front airbags and manual seat belts. This lightweight, sporty vehicle is perfect for those seeking an exhilarating open-top driving experience.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B60
Engine Number of Cylinders
4

Problems:

Oil leaks
The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.
Overheating
The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.
Timing belt wear
The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.
Fuel injector issues
Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Ignition coil failure
The ignition coils may wear out over time, leading to misfires and reduced engine power.
Exhaust manifold cracks
The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.
Sensor failures
Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.
Egr valve problems
The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.
MAZDA MX-5 1992

The 1992 Mazda MX-5 is a classic convertible with a 1.6L engine, producing between 116 and 140 horsepower. Manufactured in Hofu, Japan, this two-door roadster offers an exhilarating driving experience with its lightweight build and responsive handling. Safety features include driver and passenger front airbags and manual seat belts. This model is perfect for those seeking a blend of performance and open-air enjoyment.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Overheating
The 1992 Mazda MX-5 with the BPD engine may face overheating issues due to an aging cooling system or a failing thermostat.
Oil leaks
Common in older models, oil leaks can occur from gaskets, seals, or the oil pan.
Misfiring
Worn spark plugs, ignition coils, or fuel injectors can cause the engine to misfire.
Timing belt failure
The timing belt may wear out or break, leading to severe engine damage if not replaced at recommended intervals.
Fuel pump issues
An aging fuel pump may fail, leading to poor engine performance or starting problems.
Exhaust manifold cracks
Heat cycles can cause the exhaust manifold to crack, leading to exhaust leaks and reduced engine efficiency.
Valve cover gasket leak
The gasket may degrade over time, causing oil leaks around the valve cover.
MAZDA MX-5 1991

The 1991 Mazda MX-5 is a sleek convertible with a 1.6L B6D engine, offering 116 to 127 horsepower. It features dual front airbags for the driver and passenger, and manual seat belts. This lightweight, agile car is perfect for those who appreciate open-top driving and Japanese engineering.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B6D
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.
Overheating
Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.
Timing belt failure
The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.
Poor fuel efficiency
Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.
Ignition system issues
Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.
Vacuum leaks
Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.
MAZDA MX-5 1990

The 1990 Mazda MX-5 is a classic convertible with a 1.6L engine producing between 116 to 127 horsepower. Built in Hiroshima, Japan, this two-door roadster features a manual seat belt system and driver/passenger airbags. It's a lightweight, nimble car perfect for driving enthusiasts.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B60
Engine Number of Cylinders
4

Problems:

Oil leaks
The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.
Overheating
The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.
Timing belt wear
The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.
Fuel injector issues
Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Ignition coil failure
The ignition coils may wear out over time, leading to misfires and reduced engine power.
Exhaust manifold cracks
The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.
Sensor failures
Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.
Egr valve problems
The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.
MAZDA MX-5 1992

The 1992 Mazda MX-5 is a classic convertible with a sleek design and a peppy 1.6L engine producing up to 140 hp. Manufactured in Hofu, Japan, this two-door cabriolet offers a fun and engaging driving experience. With its lightweight build and manual seat belts, it's a perfect blend of simplicity and excitement for driving enthusiasts.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Overheating
The 1992 Mazda MX-5 with the BPD engine may face overheating issues due to an aging cooling system or a failing thermostat.
Oil leaks
Common in older models, oil leaks can occur from gaskets, seals, or the oil pan.
Misfiring
Worn spark plugs, ignition coils, or fuel injectors can cause the engine to misfire.
Timing belt failure
The timing belt may wear out or break, leading to severe engine damage if not replaced at recommended intervals.
Fuel pump issues
An aging fuel pump may fail, leading to poor engine performance or starting problems.
Exhaust manifold cracks
Heat cycles can cause the exhaust manifold to crack, leading to exhaust leaks and reduced engine efficiency.
Valve cover gasket leak
The gasket may degrade over time, causing oil leaks around the valve cover.
MAZDA MX-5 1990

The 1990 Mazda MX-5 is a classic convertible/cabriolet featuring a 1.6L, 4-cylinder engine producing between 116 to 127 hp. Known for its lightweight build, this two-door sports car offers a thrilling drive with manual seat belts and front airbags for safety. Manufactured in Hiroshima, Japan, this iconic model continues to capture the hearts of driving enthusiasts.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B60
Engine Number of Cylinders
4

Problems:

Oil leaks
The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.
Overheating
The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.
Timing belt wear
The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.
Fuel injector issues
Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Ignition coil failure
The ignition coils may wear out over time, leading to misfires and reduced engine power.
Exhaust manifold cracks
The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.
Sensor failures
Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.
Egr valve problems
The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.
MAZDA MX-5 1991

The 1991 Mazda MX-5 is a classic convertible known for its sporty handling and open-top driving experience. Powered by a 1.6L B6D engine, it offers between 116 to 127 horsepower and features a 4-cylinder setup. This lightweight roadster, produced in Hofu, Japan, is equipped with front airbags and manual seat belts for safety. Ideal for those who love the thrill of driving with the wind in their hair, the MX-5 remains an iconic choice for car enthusiasts.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B6D
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.
Overheating
Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.
Timing belt failure
The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.
Poor fuel efficiency
Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.
Ignition system issues
Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.
Vacuum leaks
Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.
MAZDA MX-5 1991

The 1991 Mazda MX-5 is a classic convertible with a 1.6L B6D engine, producing between 116 to 127 horsepower. This 2-door cabriolet offers a thrilling driving experience with its lightweight design and manual seat belts. Built by Mazda Motor Corporation in Hiroshima, Japan, it includes front airbags for driver and passenger safety. Ideal for enthusiasts who value performance and open-air motoring.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B6D
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.
Overheating
Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.
Timing belt failure
The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.
Poor fuel efficiency
Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.
Ignition system issues
Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.
Vacuum leaks
Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.
MAZDA MX-5 1993

The 1993 Mazda MX-5 is a classic convertible with a 1.6L engine producing between 116 to 140 horsepower. This 2-door, 4-cylinder sports car offers an exhilarating driving experience with the added safety of front airbags and manual seat belts. Manufactured in Hofu, Japan, by Mazda Motor Corporation, it's a lightweight and agile vehicle perfect for enthusiasts.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals may wear out over time, leading to oil leaks around the valve cover, oil pan, or timing cover.
Engine overheating
The cooling system, including the radiator, water pump, or thermostat, may fail, causing the engine to overheat.
Timing belt failure
The timing belt, if not replaced at regular intervals, can break, leading to severe engine damage.
Ignition system issues
Faulty spark plugs, ignition coils, or distributor components can lead to misfires and poor engine performance.
Fuel system problems
Clogged fuel injectors or a failing fuel pump can cause rough idling, stalling, or difficulty starting the engine.
Vacuum leaks
Cracked or disconnected vacuum hoses can lead to poor engine performance and increased emissions.
Sensor failures
Faulty oxygen sensors, mass airflow sensors, or other engine sensors can cause the engine control unit (ECU) to mismanage fuel and air mixture.
Exhaust system issues
Rusted or damaged exhaust components, such as the muffler or catalytic converter, can lead to increased noise and emissions.
TOYOTA Pick-Up 1991

The 1991 Toyota Pick-Up DLX is a robust, 4WD truck powered by a 2.4L in-line 4-cylinder engine producing 116 horsepower. With a hydraulic brake system and a gross vehicle weight rating of up to 6,000 lbs, it's built for durability and strength. Manufactured in Japan, this model features a short wheelbase and a classic 2-door design. Ideal for both work and play, it remains a reliable choice for truck enthusiasts.

Spec:

Brake System Type
Hydraulic
Engine Brake (hp) From
116
Engine Configuration
In-Line
Engine Model
22R / 22R-EC / 22R-TEC
Engine Number of Cylinders
4

Problems:

Brake fluid leaks
Hydraulic brake systems rely on brake fluid, and leaks can lead to reduced braking performance and potential brake failure.
Brake master cylinder failure
The master cylinder is crucial for generating the hydraulic pressure needed for braking; its failure can lead to a spongy brake pedal or complete brake loss.
Worn brake pads and rotors
Regular wear and tear on brake pads and rotors can lead to reduced braking efficiency and increased stopping distances.
Overheating issues
The 22R engine is known for potential overheating, often due to cooling system issues such as a failing water pump, radiator problems, or a clogged coolant passage.
Carburetor issues
The 22R engine, especially in older models, may experience problems with the carburetor, leading to poor fuel economy and rough idling.
Timing chain wear
Over time, the timing chain can wear out, leading to rattling noises and potential engine timing issues, which can affect engine performance.
Head gasket failure
This can cause coolant to mix with oil, leading to overheating and potential engine damage.
Fuel pump failure
A failing fuel pump can lead to starting issues and poor engine performance.
Vacuum leaks
These can cause rough idling and poor acceleration.
Rust and corrosion
Older Toyota Pick-Up models are prone to rust, especially in the frame and body panels, which can affect the structural integrity of the vehicle.
MAZDA MX-5 1991

The 1991 Mazda MX-5 is a classic convertible known for its lightweight design and impressive handling. Powered by a 1.6L B6D engine, it delivers between 116 to 127 horsepower. Manufactured in Hofu, Japan, this two-door roadster is equipped with front airbags and manual seat belts for safety. Ideal for enthusiasts, it embodies the spirit of driving pleasure.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B6D
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.
Overheating
Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.
Timing belt failure
The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.
Poor fuel efficiency
Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.
Ignition system issues
Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.
Vacuum leaks
Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.
VOLVO 240 Series 1992

The 1992 Volvo 240 Series Wagon, manufactured by Volvo Car Corporation in Torslanda, Sweden, features a 2.3L in-line 4-cylinder engine (B230F) producing 116 hp. Designed for 49 states, it offers manual seat belts and a driver seat airbag. This classic 5-door wagon is well-regarded for its robust construction and reliable performance.

Spec:

Engine Brake (hp) From
116
Engine Configuration
In-Line
Engine Manufacturer
Volvo
Engine Model
B230F
Engine Number of Cylinders
4
Other Engine Info
w/o EGR Bosch

Problems:

Oil leaks
The B230F engine is known for developing oil leaks, particularly around the valve cover gasket, oil pan gasket, and rear main seal.
Timing belt failure
The B230F uses a timing belt that requires regular replacement. If not maintained, a timing belt failure can cause significant engine damage.
Vacuum leaks
This engine can develop vacuum leaks due to aging hoses and seals, leading to rough idling and poor performance.
Distributor issues
The distributor cap and rotor can wear out, causing misfires and starting issues.
Cooling system problems
Aging radiators, water pumps, and hoses can lead to cooling system failures, resulting in overheating.
Fuel system issues
The Bosch fuel injection system can develop problems with fuel pumps, injectors, and the fuel pressure regulator, causing poor engine performance.
Exhaust manifold cracks
The exhaust manifold on the B230F can crack over time, leading to exhaust leaks and increased engine noise.
Idle air control valve failure
The idle air control valve can fail or get clogged, causing erratic idling and stalling.
Mass air flow sensor issues
The mass air flow sensor can fail or get dirty, leading to incorrect air-fuel mixture and poor engine performance.
Egr valve problems
Although this specific engine version is without EGR, other related engines with EGR systems can face EGR valve clogging or failure.
MAZDA MX-5 1991

Experience the thrill of open-air driving with the 1991 Mazda MX-5 Convertible. Powered by a 1.6L B6D engine delivering up to 127 hp, this classic Japanese roadster offers a pure, engaging drive. Safety features include front airbags and manual seat belts. Manufactured in Hiroshima, Japan, the MX-5 embodies Mazda's dedication to performance and reliability.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B6D
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.
Overheating
Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.
Timing belt failure
The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.
Poor fuel efficiency
Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.
Ignition system issues
Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.
Vacuum leaks
Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.
MAZDA MX-5 1990

The 1990 Mazda MX-5 is a classic convertible with a 1.6L 4-cylinder engine, producing between 116 to 127 hp. Manufactured in Hiroshima, Japan, this lightweight, sporty cabriolet offers a thrilling driving experience. It features front airbags and manual seat belts for safety. Perfect for those who enjoy open-top driving with reliable Japanese engineering.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B60
Engine Number of Cylinders
4

Problems:

Oil leaks
The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.
Overheating
The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.
Timing belt wear
The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.
Fuel injector issues
Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Ignition coil failure
The ignition coils may wear out over time, leading to misfires and reduced engine power.
Exhaust manifold cracks
The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.
Sensor failures
Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.
Egr valve problems
The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.
MAZDA MX-5 1993

The 1993 Mazda MX-5 is a classic convertible equipped with a 1.6-liter, 4-cylinder engine producing between 116 to 140 horsepower. Manufactured by Mazda Motor Corporation in Hofu, Japan, this two-door cabriolet offers a thrilling open-air driving experience. With a gross vehicle weight rating of under 6,000 lbs, it's a lightweight and nimble sports car.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Oil leaks
Gaskets and seals may wear out over time, leading to oil leaks around the valve cover, oil pan, or timing cover.
Engine overheating
The cooling system, including the radiator, water pump, or thermostat, may fail, causing the engine to overheat.
Timing belt failure
The timing belt, if not replaced at regular intervals, can break, leading to severe engine damage.
Ignition system issues
Faulty spark plugs, ignition coils, or distributor components can lead to misfires and poor engine performance.
Fuel system problems
Clogged fuel injectors or a failing fuel pump can cause rough idling, stalling, or difficulty starting the engine.
Vacuum leaks
Cracked or disconnected vacuum hoses can lead to poor engine performance and increased emissions.
Sensor failures
Faulty oxygen sensors, mass airflow sensors, or other engine sensors can cause the engine control unit (ECU) to mismanage fuel and air mixture.
Exhaust system issues
Rusted or damaged exhaust components, such as the muffler or catalytic converter, can lead to increased noise and emissions.
MAZDA MX-5 1994

The 1994 Mazda MX-5 is a classic 2-door convertible known for its nimble handling and sporty character. Powered by a 1.8L 4-cylinder engine producing between 116 to 140 hp, it promises an exhilarating drive. Made by Mazda Motor Corporation in Hiroshima, Japan, this lightweight roadster combines the thrill of open-top motoring with dependable Japanese engineering.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
140
Engine Model
BPD
Engine Number of Cylinders
4

Problems:

Oil leaks
The 1994 Mazda MX-5, particularly with the BPD engine, is prone to oil leaks, often from the valve cover gasket or oil pan gasket.
Timing belt wear
The timing belt in the BPD engine may wear out or break if not replaced at regular intervals, leading to potential engine damage.
Cooling system issues
The cooling system, including the radiator and water pump, may develop leaks or fail, causing the engine to overheat.
Ignition system problems
Misfires or starting issues can occur due to faulty spark plugs, ignition coils, or the distributor.
Fuel injector problems
Clogged or dirty fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Crankshaft position sensor failure
A faulty crankshaft position sensor can cause the engine to stall or not start at all.
Cylinder head gasket failure
The head gasket can fail, leading to coolant leaks and overheating issues.
Vacuum leaks
Vacuum leaks can cause rough idling, poor acceleration, and decreased fuel economy.
Exhaust manifold cracks
Cracks in the exhaust manifold can lead to exhaust leaks and increased engine noise.
MAZDA MX-5 1990

The 1990 Mazda MX-5 is a classic convertible/cabriolet with a 1.6L, 4-cylinder B60 engine producing between 116 to 127 hp. Manufactured in Hiroshima, Japan, this lightweight, two-door passenger car offers a manual seat belt system and front airbags for driver and passenger safety. Ideal for driving enthusiasts, it combines sporty performance with a timeless design.

Spec:

Engine Brake (hp) From
116
Engine Brake (hp) To
127
Engine Model
B60
Engine Number of Cylinders
4

Problems:

Oil leaks
The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.
Overheating
The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.
Timing belt wear
The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.
Fuel injector issues
Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Ignition coil failure
The ignition coils may wear out over time, leading to misfires and reduced engine power.
Exhaust manifold cracks
The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.
Sensor failures
Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.
Egr valve problems
The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.
© Copyright 2024 VinCyp.com Privacy Policy
VIN Decoder (vincyp.com) does not guarantee the accuracy of provided information, including technical data, features, specifications, indicators, etc. All manufacturers' logos, brands, and trademarks are the property of their respective owners.