Most Common Car Issues

Selected parameters

Add more parameters

Brake System Type

Dynamic Brake Support (DBS)

Engine Manufacturer

Engine Model

Engine Number of Cylinders

MOST COMMON PROBLEMS

MAZDA MX-5 2017

The 2017 Mazda MX-5 Grand Touring is a stylish convertible with a soft top, accommodating up to five passengers. It features a 2.0L inline-4 engine with 155 horsepower, paired with a 6-speed transmission, and offers rear-wheel drive for a dynamic driving experience. Safety and convenience are prioritized with standard features such as Dynamic Brake Support, Lane Departure Warning, Blind Spot Warning, and a backup camera. With its lightweight design and advanced safety systems, this Mazda is a perfect blend of performance and practicality.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

MAZDA MX-5 2018

This 2018 Mazda MX-5 Grand Touring is a sleek convertible with a 2.0L in-line engine delivering 155 hp. It features a 6-speed transmission and offers a range of safety features like Lane Departure Warning, Blind Spot Warning, and Electronic Stability Control. With a lightweight build, this two-seater is designed for driving enthusiasts seeking a sporty, open-air experience. Its manufacturing roots trace back to Hiroshima, Japan, under the renowned Mazda Motor Corporation.

Spec:

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

Over time, seals and gaskets can wear out, leading to oil leaks which can cause engine damage if not addressed.

Timing chain issues

The timing chain can become loose or worn, leading to poor engine performance or even engine failure.

Carbon build-up

Carbon can accumulate in the intake valves and other parts, affecting engine efficiency and performance.

Cooling system failures

Issues with the radiator, water pump, or hoses can lead to overheating and potential engine damage.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor fuel economy and engine misfires.

TOYOTA Land Cruiser 1991

The 1991 Toyota Land Cruiser is a robust SUV designed for both off-road adventures and urban driving. With a 3.955-liter in-line 6-cylinder engine producing at least 155 hp, it offers a reliable performance backed by Toyota's engineering excellence. This 4WD vehicle is equipped with electronic fuel injection and a hydraulic brake system, ensuring smooth handling and safety. Built in Toyota City, Japan, the Land Cruiser is known for its durability and versatility, making it a popular choice among SUV enthusiasts.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to decreased braking performance.

Worn brake pads

Over time, brake pads wear down and need to be replaced to maintain effective braking.

Spongy brake pedal

Air in the hydraulic brake lines can cause a spongy brake pedal, reducing braking efficiency.

Engine overheating

The 3F-E inline-six engine can have cooling system issues which may lead to overheating, especially in older models.

Fuel injection problems

The electronic fuel injection system can experience issues such as clogged injectors or faulty sensors, leading to poor engine performance.

Oil leaks

Common in older engines, oil leaks can occur from the valve cover gaskets, oil pan, or seals.

Timing chain wear

The timing chain can stretch or wear out over time, affecting engine timing and performance.

Vacuum leaks

Vacuum leaks can cause rough idling or stalling, as they affect the air-fuel mixture in the engine.

Ignition system issues

Problems with the ignition system, such as worn spark plugs or faulty ignition coils, can lead to misfires and poor engine performance.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased engine noise.

Egr valve problems

The Exhaust Gas Recirculation (EGR) valve can become clogged or fail, affecting emissions and engine performance.

TOYOTA Land Cruiser 1991

The 1991 Toyota Land Cruiser is a robust SUV with a 4WD drive type and a 3.955L in-line 6-cylinder engine. Featuring hydraulic brakes and electronic fuel injection, it delivers 155 hp. Manufactured by Toyota Motor Corporation in Toyota City, Japan, this vehicle is built for versatility and reliability.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to decreased braking performance.

Worn brake pads

Over time, brake pads wear down and need to be replaced to maintain effective braking.

Spongy brake pedal

Air in the hydraulic brake lines can cause a spongy brake pedal, reducing braking efficiency.

Engine overheating

The 3F-E inline-six engine can have cooling system issues which may lead to overheating, especially in older models.

Fuel injection problems

The electronic fuel injection system can experience issues such as clogged injectors or faulty sensors, leading to poor engine performance.

Oil leaks

Common in older engines, oil leaks can occur from the valve cover gaskets, oil pan, or seals.

Timing chain wear

The timing chain can stretch or wear out over time, affecting engine timing and performance.

Vacuum leaks

Vacuum leaks can cause rough idling or stalling, as they affect the air-fuel mixture in the engine.

Ignition system issues

Problems with the ignition system, such as worn spark plugs or faulty ignition coils, can lead to misfires and poor engine performance.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased engine noise.

Egr valve problems

The Exhaust Gas Recirculation (EGR) valve can become clogged or fail, affecting emissions and engine performance.

MAZDA MX-5 2017

The 2017 Mazda MX-5, produced by Mazda Motor Corporation in Hiroshima, Japan, is a sleek convertible with a soft top. It features a 2.0L in-line 4-cylinder engine producing 155 hp, coupled with a 6-speed transmission and rear-wheel drive. Safety is enhanced with standard Dynamic Brake Support, ABS, ESC, and multiple airbags. Luxurious touches include keyless ignition, a backup camera, and blind spot warning.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

MAZDA MX-5 2017

The 2017 Mazda MX-5 Grand Touring is a stylish and performance-oriented convertible with a 2.0L inline-4 engine producing 155 hp. It features standard safety and convenience technologies, including Dynamic Brake Support, Lane Departure Warning, and a Blind Spot Warning system. The vehicle supports a 6-speed transmission and offers a rear-wheel drive experience. Built in Hiroshima, Japan, this hardtop model seats five and provides a thrilling drive with modern amenities.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

MAZDA MX-5 2018

The 2018 Mazda MX-5 Club is a sleek, left-hand drive, 2-seater convertible powered by a 2.0L in-line 4-cylinder engine producing 155 hp. It features standard safety systems like ABS, traction control, blind spot warning, and advanced crash notification. With a base price of $29,155, this sporty car offers a thrilling driving experience with modern conveniences like keyless ignition and a Mazda Advanced Key Entry system. Built by Mazda Motor Corporation in Hiroshima, Japan, it also includes standard tire pressure monitoring and electronic stability control.

Spec:

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

Over time, seals and gaskets can wear out, leading to oil leaks which can cause engine damage if not addressed.

Timing chain issues

The timing chain can become loose or worn, leading to poor engine performance or even engine failure.

Carbon build-up

Carbon can accumulate in the intake valves and other parts, affecting engine efficiency and performance.

Cooling system failures

Issues with the radiator, water pump, or hoses can lead to overheating and potential engine damage.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor fuel economy and engine misfires.

NISSAN 240SX 1991

The 1991 Nissan 240SX is a 2-door hatchback powered by the rugged KA24DE 2.4L inline-4 engine, delivering 155 hp. Manufactured in Miyawaka, Japan, this classic model features a dual overhead cam (DOHC) setup and a 4x2 drive type. Renowned for its lightweight and agile handling, it remains a favorite among automotive enthusiasts.

Spec:

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Nissan

Engine Model

KA24DE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

The KA24DE engine can develop oil leaks from the valve cover gasket, oil pan gasket, and front and rear main seals.

Timing chain rattle

Over time, the timing chain and its tensioners can wear out, leading to a rattling noise, especially during startup.

Head gasket failure

The head gasket can fail, causing coolant leaks and potentially leading to overheating and engine damage.

Fuel injector issues

Fuel injectors can become clogged or fail, leading to poor engine performance and misfires.

Coolant leaks

Coolant leaks can occur from the radiator, hoses, or the water pump, leading to engine overheating if not addressed.

Idle air control valve problems

The idle air control valve can become dirty or fail, causing rough idling or stalling.

Mass air flow sensor failure

The mass air flow sensor can fail or become dirty, affecting the air-fuel mixture and leading to performance issues.

Crankshaft position sensor failure

The crankshaft position sensor can fail, causing the engine to stall or not start.

MAZDA MX-5 2017

The 2017 Mazda MX-5 Club is a stylish soft-top convertible with a 2.0L inline-4 engine producing 155 hp. It features key safety technologies like Dynamic Brake Support, ABS, and Advanced Automatic Crash Notification. Enjoy a smooth ride with its 6-speed transmission and rear-wheel drive, complemented by a modern suite of tech including a backup camera and Blind Spot Warning. This Japanese-made, left-hand drive vehicle offers seating for five and combines sporty performance with essential safety features.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

MAZDA MX-5 2017

The 2017 Mazda MX-5 Club is a stylish, 2-door hard top convertible with a 2.0L inline-4 engine producing 155 hp. Designed for driving enthusiasts, it features rear-wheel drive, a 6-speed transmission, and advanced safety systems like Dynamic Brake Support and Blind Spot Warning. With seating for 5 and a host of standard features including a backup camera, keyless ignition, and electronic stability control, this vehicle offers both performance and comfort. Built in Hiroshima, Japan, by Mazda Motor Corporation, it's a well-rounded passenger car with a sporty edge.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

TOYOTA Land Cruiser 1992

The 1992 Toyota Land Cruiser is a robust SUV featuring a 3.955L in-line 6-cylinder engine with 155 hp and electronic fuel injection. It offers 4WD capabilities and hydraulic brakes, ensuring excellent off-road performance and handling. With a gross vehicle weight rating of up to 6,000 lbs, it's a versatile and durable choice for both urban and rugged environments. Built by Toyota Motor Corporation in Toyota City, Japan, this model is a testament to Toyota's engineering excellence.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, hoses, or master cylinder, leading to decreased braking efficiency.

Brake fade

Prolonged use of brakes, especially in a vehicle like the 1992 Toyota Land Cruiser, can cause brake fade due to overheating.

Master cylinder failure

Over time, the master cylinder can wear out, causing brake fluid to bypass the seals and reducing braking power.

Warped brake rotors

Heavy braking or prolonged use can cause brake rotors to warp, leading to a pulsating brake pedal and decreased braking performance.

Engine overheating

The inline-6 engine configuration can sometimes suffer from cooling issues, especially if the radiator or cooling system components are not maintained properly.

Electronic fuel injection issues

The electronic fuel injection system can develop problems such as faulty sensors or clogged injectors, leading to poor engine performance and fuel efficiency.

Head gasket failure

The 3F-E engine is known to sometimes develop head gasket issues, leading to coolant leaks, engine overheating, and potential engine damage.

Valve train wear

The inline-6 configuration can sometimes experience wear in the valve train components, leading to noisy operation and reduced engine performance.

Timing chain wear

Over time, the timing chain can stretch or wear out, leading to timing issues and potential engine damage if not addressed.

Fuel pump failure

The electronic fuel injection system relies on a functioning fuel pump, which can fail over time, causing the engine to run poorly or not start at all.

Corroded brake lines

Over time, brake lines can become corroded, particularly in older vehicles like a 1992 model, leading to potential brake fluid leaks and brake failure.

NISSAN 240SX 1994

The 1994 Nissan 240SX Convertible, powered by a 2.4L KA24DE inline-4 engine, delivers 155 horsepower. Manufactured in Miyawaka, Japan, this stylish two-door cabriolet features a dual overhead cam design and automatic seat belts. A classic blend of performance and open-air driving experience.

Spec:

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Nissan

Engine Model

KA24DE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

The KA24DE engine is known for developing oil leaks over time, especially from valve cover gaskets and front and rear main seals.

Timing chain noise

The timing chain on the KA24DE can become noisy due to worn tensioners and guides, leading to a rattling sound.

Overheating

The 240SX can experience overheating issues if the cooling system is not properly maintained, including problems with the radiator, water pump, or thermostat.

Idle issues

The idle air control valve (IACV) and mass air flow sensor (MAF) can cause irregular idling or stalling problems.

Head gasket failure

With age and high mileage, the KA24DE engine may develop head gasket issues, leading to coolant leaks and potential engine overheating.

Power loss

Older engines may experience power loss due to wear and tear on internal components or issues with the fuel injection system.

Exhaust manifold cracks

The stock exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.

Egr valve problems

The exhaust gas recirculation (EGR) valve can become clogged or fail, causing rough idling and increased emissions.

Sensor failures

Sensors such as the oxygen sensor, crankshaft position sensor, and camshaft position sensor can fail, leading to various engine performance issues.

Fuel injector leaks

Over time, fuel injectors can develop leaks or become clogged, leading to poor fuel efficiency and engine misfires.

MAZDA MX-5 2017

The 2017 Mazda MX-5 Grand Touring is a stylish convertible with a soft top and seating for five. Powered by a 2.0L inline-4 engine producing 155 hp, it features rear-wheel drive and a 6-speed transmission. Safety and convenience come standard with Dynamic Brake Support (DBS), Lane Departure Warning (LDW), Blind Spot Warning (BSW), and a backup camera. Built by Mazda Motor Corporation in Hiroshima, Japan, this model combines performance and advanced safety features.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

TOYOTA Land Cruiser 1991

The 1991 Toyota Land Cruiser is a robust SUV with a 3.955L in-line 6-cylinder engine, generating 155 hp. This 4WD vehicle features electronic fuel injection and a hydraulic brake system. Manufactured in Japan by Toyota Motor Corporation, it’s designed for both on-road comfort and off-road capability.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to decreased braking performance.

Worn brake pads

Over time, brake pads wear down and need to be replaced to maintain effective braking.

Spongy brake pedal

Air in the hydraulic brake lines can cause a spongy brake pedal, reducing braking efficiency.

Engine overheating

The 3F-E inline-six engine can have cooling system issues which may lead to overheating, especially in older models.

Fuel injection problems

The electronic fuel injection system can experience issues such as clogged injectors or faulty sensors, leading to poor engine performance.

Oil leaks

Common in older engines, oil leaks can occur from the valve cover gaskets, oil pan, or seals.

Timing chain wear

The timing chain can stretch or wear out over time, affecting engine timing and performance.

Vacuum leaks

Vacuum leaks can cause rough idling or stalling, as they affect the air-fuel mixture in the engine.

Ignition system issues

Problems with the ignition system, such as worn spark plugs or faulty ignition coils, can lead to misfires and poor engine performance.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased engine noise.

Egr valve problems

The Exhaust Gas Recirculation (EGR) valve can become clogged or fail, affecting emissions and engine performance.

MAZDA MX-5 2017

The 2017 Mazda MX-5 is a stylish convertible with a soft top and a 2.0L inline-4 engine producing 155 hp. It features key safety systems like Dynamic Brake Support (DBS), ABS, and Electronic Stability Control (ESC). Equipped with modern amenities such as a backup camera, Blind Spot Warning (BSW), and keyless ignition, this rear-wheel-drive car offers a blend of performance and comfort. Built in Hiroshima, Japan, it seats 5 passengers and includes a 6-speed transmission.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

TOYOTA Land Cruiser 1992

The 1992 Toyota Land Cruiser is a robust 4WD sport utility vehicle powered by a 3.955L in-line 6-cylinder engine with electronic fuel injection. This model, produced in Toyota City, Japan, offers a hydraulic brake system and a gross vehicle weight rating between 5,001 and 6,000 lbs. Ideal for both off-road adventures and daily commuting, it embodies Toyota's hallmark reliability and performance.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, hoses, or master cylinder, leading to decreased braking efficiency.

Brake fade

Prolonged use of brakes, especially in a vehicle like the 1992 Toyota Land Cruiser, can cause brake fade due to overheating.

Master cylinder failure

Over time, the master cylinder can wear out, causing brake fluid to bypass the seals and reducing braking power.

Warped brake rotors

Heavy braking or prolonged use can cause brake rotors to warp, leading to a pulsating brake pedal and decreased braking performance.

Engine overheating

The inline-6 engine configuration can sometimes suffer from cooling issues, especially if the radiator or cooling system components are not maintained properly.

Electronic fuel injection issues

The electronic fuel injection system can develop problems such as faulty sensors or clogged injectors, leading to poor engine performance and fuel efficiency.

Head gasket failure

The 3F-E engine is known to sometimes develop head gasket issues, leading to coolant leaks, engine overheating, and potential engine damage.

Valve train wear

The inline-6 configuration can sometimes experience wear in the valve train components, leading to noisy operation and reduced engine performance.

Timing chain wear

Over time, the timing chain can stretch or wear out, leading to timing issues and potential engine damage if not addressed.

Fuel pump failure

The electronic fuel injection system relies on a functioning fuel pump, which can fail over time, causing the engine to run poorly or not start at all.

Corroded brake lines

Over time, brake lines can become corroded, particularly in older vehicles like a 1992 model, leading to potential brake fluid leaks and brake failure.

TOYOTA Land Cruiser 1991

The 1991 Toyota Land Cruiser is a robust SUV equipped with a 3.955L inline-six engine producing 155 hp. It features a hydraulic brake system and 4-wheel drive capability, making it a versatile choice for both on-road and off-road adventures. Manufactured in Japan by Toyota Motor Corporation, this model is known for its durability and reliability.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to decreased braking performance.

Worn brake pads

Over time, brake pads wear down and need to be replaced to maintain effective braking.

Spongy brake pedal

Air in the hydraulic brake lines can cause a spongy brake pedal, reducing braking efficiency.

Engine overheating

The 3F-E inline-six engine can have cooling system issues which may lead to overheating, especially in older models.

Fuel injection problems

The electronic fuel injection system can experience issues such as clogged injectors or faulty sensors, leading to poor engine performance.

Oil leaks

Common in older engines, oil leaks can occur from the valve cover gaskets, oil pan, or seals.

Timing chain wear

The timing chain can stretch or wear out over time, affecting engine timing and performance.

Vacuum leaks

Vacuum leaks can cause rough idling or stalling, as they affect the air-fuel mixture in the engine.

Ignition system issues

Problems with the ignition system, such as worn spark plugs or faulty ignition coils, can lead to misfires and poor engine performance.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased engine noise.

Egr valve problems

The Exhaust Gas Recirculation (EGR) valve can become clogged or fail, affecting emissions and engine performance.

MAZDA MX-5 2018

The 2018 Mazda MX-5 Club is a sporty 2-seater convertible with a 2.0L in-line 4-cylinder engine, producing 155 hp. It features a 6-speed transmission, standard ABS, and advanced safety systems including Blind Spot Warning and Rear Cross Traffic Alert. Priced at $29,155, this left-hand drive vehicle offers a fun and secure driving experience. Made by Mazda Motor Corporation in Hiroshima, Japan, it's designed for enthusiasts who appreciate performance and style.

Spec:

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

Over time, seals and gaskets can wear out, leading to oil leaks which can cause engine damage if not addressed.

Timing chain issues

The timing chain can become loose or worn, leading to poor engine performance or even engine failure.

Carbon build-up

Carbon can accumulate in the intake valves and other parts, affecting engine efficiency and performance.

Cooling system failures

Issues with the radiator, water pump, or hoses can lead to overheating and potential engine damage.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor fuel economy and engine misfires.

TOYOTA Land Cruiser 1991

The 1991 Toyota Land Cruiser is a versatile SUV equipped with a 3.955L inline-6 engine producing 155 hp. It features a 4WD system, electronic fuel injection, and a robust hydraulic brake system. Manufactured in Toyota City, Japan, this MPV is designed for both rugged off-road adventures and comfortable on-road driving.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to decreased braking performance.

Worn brake pads

Over time, brake pads wear down and need to be replaced to maintain effective braking.

Spongy brake pedal

Air in the hydraulic brake lines can cause a spongy brake pedal, reducing braking efficiency.

Engine overheating

The 3F-E inline-six engine can have cooling system issues which may lead to overheating, especially in older models.

Fuel injection problems

The electronic fuel injection system can experience issues such as clogged injectors or faulty sensors, leading to poor engine performance.

Oil leaks

Common in older engines, oil leaks can occur from the valve cover gaskets, oil pan, or seals.

Timing chain wear

The timing chain can stretch or wear out over time, affecting engine timing and performance.

Vacuum leaks

Vacuum leaks can cause rough idling or stalling, as they affect the air-fuel mixture in the engine.

Ignition system issues

Problems with the ignition system, such as worn spark plugs or faulty ignition coils, can lead to misfires and poor engine performance.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased engine noise.

Egr valve problems

The Exhaust Gas Recirculation (EGR) valve can become clogged or fail, affecting emissions and engine performance.

TOYOTA Land Cruiser 1992

The 1992 Toyota Land Cruiser is a robust 4WD SUV powered by a 3.955L inline-6 engine with 155 hp. It features hydraulic brakes and electronic fuel injection. Manufactured by Toyota Motor Corporation in Toyota City, Japan, this model is designed for versatility and durability with a gross vehicle weight rating between 5,001 - 6,000 lbs.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, hoses, or master cylinder, leading to decreased braking efficiency.

Brake fade

Prolonged use of brakes, especially in a vehicle like the 1992 Toyota Land Cruiser, can cause brake fade due to overheating.

Master cylinder failure

Over time, the master cylinder can wear out, causing brake fluid to bypass the seals and reducing braking power.

Warped brake rotors

Heavy braking or prolonged use can cause brake rotors to warp, leading to a pulsating brake pedal and decreased braking performance.

Engine overheating

The inline-6 engine configuration can sometimes suffer from cooling issues, especially if the radiator or cooling system components are not maintained properly.

Electronic fuel injection issues

The electronic fuel injection system can develop problems such as faulty sensors or clogged injectors, leading to poor engine performance and fuel efficiency.

Head gasket failure

The 3F-E engine is known to sometimes develop head gasket issues, leading to coolant leaks, engine overheating, and potential engine damage.

Valve train wear

The inline-6 configuration can sometimes experience wear in the valve train components, leading to noisy operation and reduced engine performance.

Timing chain wear

Over time, the timing chain can stretch or wear out, leading to timing issues and potential engine damage if not addressed.

Fuel pump failure

The electronic fuel injection system relies on a functioning fuel pump, which can fail over time, causing the engine to run poorly or not start at all.

Corroded brake lines

Over time, brake lines can become corroded, particularly in older vehicles like a 1992 model, leading to potential brake fluid leaks and brake failure.

MAZDA MX-5 2017

The 2017 Mazda MX-5 Grand Touring is a stylish and well-equipped convertible with a 2.0L inline-4 engine producing 155 hp. It features a 6-speed transmission and rear-wheel drive, ensuring a dynamic driving experience. Safety is enhanced with standard features like Dynamic Brake Support, Lane Departure Warning, Blind Spot Warning, and a Backup Camera. This 2-door, 5-seat hard top vehicle also includes modern conveniences like Keyless Ignition and an Auto-Reverse System for windows and sunroofs.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

MAZDA MX-5 2018

The 2018 Mazda MX-5 Club is a sleek, two-seat convertible with a 2.0L inline-4 engine delivering 155 hp. It features left-hand drive, standard ABS, traction control, and blind spot warning for enhanced safety. With a base price of $29,155, this stylish roadster provides a thrilling driving experience backed by Mazda's renowned engineering. Manufactured in Hiroshima, Japan, it includes modern amenities like keyless ignition and advanced crash notification.

Spec:

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

Over time, seals and gaskets can wear out, leading to oil leaks which can cause engine damage if not addressed.

Timing chain issues

The timing chain can become loose or worn, leading to poor engine performance or even engine failure.

Carbon build-up

Carbon can accumulate in the intake valves and other parts, affecting engine efficiency and performance.

Cooling system failures

Issues with the radiator, water pump, or hoses can lead to overheating and potential engine damage.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor fuel economy and engine misfires.

TOYOTA Land Cruiser 1991

The 1991 Toyota Land Cruiser is a robust SUV with a 3.955L in-line 6-cylinder engine, producing 155 hp. Built in Toyota City, Japan, it features hydraulic brakes and 4WD capabilities, making it ideal for both urban and off-road adventures. This model also boasts electronic fuel injection for improved performance.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to decreased braking performance.

Worn brake pads

Over time, brake pads wear down and need to be replaced to maintain effective braking.

Spongy brake pedal

Air in the hydraulic brake lines can cause a spongy brake pedal, reducing braking efficiency.

Engine overheating

The 3F-E inline-six engine can have cooling system issues which may lead to overheating, especially in older models.

Fuel injection problems

The electronic fuel injection system can experience issues such as clogged injectors or faulty sensors, leading to poor engine performance.

Oil leaks

Common in older engines, oil leaks can occur from the valve cover gaskets, oil pan, or seals.

Timing chain wear

The timing chain can stretch or wear out over time, affecting engine timing and performance.

Vacuum leaks

Vacuum leaks can cause rough idling or stalling, as they affect the air-fuel mixture in the engine.

Ignition system issues

Problems with the ignition system, such as worn spark plugs or faulty ignition coils, can lead to misfires and poor engine performance.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased engine noise.

Egr valve problems

The Exhaust Gas Recirculation (EGR) valve can become clogged or fail, affecting emissions and engine performance.

MAZDA MX-5 2017

The 2017 Mazda MX-5 is a stylish convertible with a 2.0L inline-4 engine producing 155 hp. It features standard safety equipment like Dynamic Brake Support, ABS, and a backup camera. With a hard top, it seats 5 and offers advanced features like Blind Spot Warning and Keyless Ignition. Built in Hiroshima, Japan, this rear-wheel drive car combines performance and safety seamlessly.

Spec:

Dynamic Brake Support (DBS)

Standard

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Manufacturer

Mazda

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Dynamic brake support (dbs) malfunction

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Engine misfires

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Oil leaks

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

Check engine light (cel)

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Timing chain/belt issues

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Fuel system issues

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

Variable valve timing (vvt) issues

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Exhaust system issues

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

Throttle body problems

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

TOYOTA Land Cruiser 1992

The 1992 Toyota Land Cruiser is a robust SUV designed for versatility and off-road capability. Equipped with a 3.955-liter in-line 6-cylinder engine producing 155 hp, it features a 4-wheel drive system and electronic fuel injection. This model is built by Toyota Motor Corporation in Toyota City, Japan, and falls within the Class 1D weight category. Ideal for rugged terrains and daily commutes, it's a dependable choice for adventurers and families alike.

Spec:

Brake System Type

Hydraulic

Engine Brake (hp) From

155

Engine Configuration

In-Line

Engine Model

3F-E

Engine Number of Cylinders

Other Engine Info

Electronic Fuel Injection

Problems:

Brake fluid leaks

Hydraulic brake systems can develop leaks in the brake lines, hoses, or master cylinder, leading to decreased braking efficiency.

Brake fade

Prolonged use of brakes, especially in a vehicle like the 1992 Toyota Land Cruiser, can cause brake fade due to overheating.

Master cylinder failure

Over time, the master cylinder can wear out, causing brake fluid to bypass the seals and reducing braking power.

Warped brake rotors

Heavy braking or prolonged use can cause brake rotors to warp, leading to a pulsating brake pedal and decreased braking performance.

Engine overheating

The inline-6 engine configuration can sometimes suffer from cooling issues, especially if the radiator or cooling system components are not maintained properly.

Electronic fuel injection issues

The electronic fuel injection system can develop problems such as faulty sensors or clogged injectors, leading to poor engine performance and fuel efficiency.

Head gasket failure

The 3F-E engine is known to sometimes develop head gasket issues, leading to coolant leaks, engine overheating, and potential engine damage.

Valve train wear

The inline-6 configuration can sometimes experience wear in the valve train components, leading to noisy operation and reduced engine performance.

Timing chain wear

Over time, the timing chain can stretch or wear out, leading to timing issues and potential engine damage if not addressed.

Fuel pump failure

The electronic fuel injection system relies on a functioning fuel pump, which can fail over time, causing the engine to run poorly or not start at all.

Corroded brake lines

Over time, brake lines can become corroded, particularly in older vehicles like a 1992 model, leading to potential brake fluid leaks and brake failure.