Most Common Car Issues
Add more parameters
MOST COMMON PROBLEMS
BMW 325iS 1991
The 1991 BMW 325iS is a classic 2-door sedan featuring a 2.5L 6-cylinder engine producing 168 horsepower. Manufactured in Regensburg, Germany, this E30 series model comes with an automatic transmission and a supplemental restraint system (SRS). It runs on gasoline and is designed for those who appreciate BMW's engineering excellence.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6
Problems:
Oil leaks
1991 BMW 325iS models are known for developing oil leaks over time, often from the valve cover gasket, oil pan gasket, or rear main seal.
Cooling system issues
These vehicles can suffer from cooling system problems including radiator leaks, water pump failures, and thermostat issues, which can lead to overheating.
Timing belt/chain issues
The timing belt or chain can wear out or fail, leading to engine performance problems or even catastrophic engine damage if not replaced at recommended intervals.
Fuel system problems
Fuel injectors and fuel pumps can become clogged or fail, causing poor engine performance or stalling.
Electrical problems
The aging electrical system may lead to issues such as faulty sensors, wiring problems, or issues with the ignition system.
Vacuum leaks
Vacuum hoses can become brittle and crack over time, leading to rough idling, poor acceleration, and increased emissions.
Head gasket failure
Higher mileage engines may experience head gasket failure, which can cause coolant and oil to mix or lead to overheating.
Exhaust system corrosion
The exhaust system components, including the catalytic converter and mufflers, can corrode over time, leading to exhaust leaks and increased emissions.
Worn engine mounts
Engine mounts can wear out, causing excessive engine movement, vibrations, and noise during operation.
Sensor failures
Common sensor issues include the mass air flow (MAF) sensor, oxygen sensors, and crankshaft position sensor, leading to poor engine performance and fuel efficiency.
BMW 325iS 1991
The 1991 BMW 325iS is a classic 2-door sedan from the E30 series, powered by a 2.5L inline-six engine producing 168 hp. Manufactured in Regensburg, Germany, this model features an automatic transmission and manual seat belts. It offers a blend of performance and elegance typical of BMW's engineering prowess.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6
Problems:
Oil leaks
1991 BMW 325iS models are known for developing oil leaks over time, often from the valve cover gasket, oil pan gasket, or rear main seal.
Cooling system issues
These vehicles can suffer from cooling system problems including radiator leaks, water pump failures, and thermostat issues, which can lead to overheating.
Timing belt/chain issues
The timing belt or chain can wear out or fail, leading to engine performance problems or even catastrophic engine damage if not replaced at recommended intervals.
Fuel system problems
Fuel injectors and fuel pumps can become clogged or fail, causing poor engine performance or stalling.
Electrical problems
The aging electrical system may lead to issues such as faulty sensors, wiring problems, or issues with the ignition system.
Vacuum leaks
Vacuum hoses can become brittle and crack over time, leading to rough idling, poor acceleration, and increased emissions.
Head gasket failure
Higher mileage engines may experience head gasket failure, which can cause coolant and oil to mix or lead to overheating.
Exhaust system corrosion
The exhaust system components, including the catalytic converter and mufflers, can corrode over time, leading to exhaust leaks and increased emissions.
Worn engine mounts
Engine mounts can wear out, causing excessive engine movement, vibrations, and noise during operation.
Sensor failures
Common sensor issues include the mass air flow (MAF) sensor, oxygen sensors, and crankshaft position sensor, leading to poor engine performance and fuel efficiency.
BMW 325ix 1991
The 1991 BMW 325ix is a classic sedan with a 6-cylinder engine producing 168 horsepower. Manufactured in Regensburg, Germany, this model features a 2-door design and an automatic transmission. It runs on gasoline and is part of BMW's renowned 3 Series, specifically the E30/16.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Older BMW engines, especially from the early '90s, are prone to develop oil leaks due to worn gaskets and seals.
Cooling system failures
The cooling systems in these models are known to have issues with the radiator, water pump, and thermostat, leading to overheating.
Vacuum leaks
The intake manifold and various vacuum lines can develop leaks over time, causing rough idling and poor performance.
Worn timing belt/chain
Depending on the specific engine, the timing belt or chain can wear out, leading to potential engine damage if not replaced timely.
Faulty ignition coils
Ignition coils can fail, causing misfires and poor engine performance.
Fuel injector problems
Clogged or failing fuel injectors can lead to uneven engine performance and reduced fuel efficiency.
Valve cover gasket failure
The valve cover gasket is prone to leaking, which can cause oil to seep into the spark plug wells.
Mass air flow (maf) sensor issues
A failing MAF sensor can cause the engine to run lean or rich, affecting performance and fuel economy.
Crankshaft position sensor failure
A faulty sensor can result in intermittent stalling or a no-start condition.
Idle control valve problems
The idle control valve can become dirty or fail, leading to unstable idle speeds.
BMW 325ix 1991
The 1991 BMW 325ix is a classic sedan featuring a 152cc, 6-cylinder engine capable of delivering 168 horsepower. Manufactured in Regensburg, Germany, this model comes with a supplemental restraint system and manual seat belts. It offers an automatic transmission and runs on gasoline. Part of the 3 Series, it represents the E30/16 lineage.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Older BMW engines, especially from the early '90s, are prone to develop oil leaks due to worn gaskets and seals.
Cooling system failures
The cooling systems in these models are known to have issues with the radiator, water pump, and thermostat, leading to overheating.
Vacuum leaks
The intake manifold and various vacuum lines can develop leaks over time, causing rough idling and poor performance.
Worn timing belt/chain
Depending on the specific engine, the timing belt or chain can wear out, leading to potential engine damage if not replaced timely.
Faulty ignition coils
Ignition coils can fail, causing misfires and poor engine performance.
Fuel injector problems
Clogged or failing fuel injectors can lead to uneven engine performance and reduced fuel efficiency.
Valve cover gasket failure
The valve cover gasket is prone to leaking, which can cause oil to seep into the spark plug wells.
Mass air flow (maf) sensor issues
A failing MAF sensor can cause the engine to run lean or rich, affecting performance and fuel economy.
Crankshaft position sensor failure
A faulty sensor can result in intermittent stalling or a no-start condition.
Idle control valve problems
The idle control valve can become dirty or fail, leading to unstable idle speeds.
BMW 325ix 1991
The 1991 BMW 325ix is a classic sedan featuring a 2.5L inline-6 engine that delivers 168 hp. Manufactured in Regensburg, Germany, it comes equipped with a 4-door configuration and an automatic transmission. This model belongs to the E30 series and includes a Dr. Supplemental Restraint System (SRS) for enhanced safety.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Older BMW engines, especially from the early '90s, are prone to develop oil leaks due to worn gaskets and seals.
Cooling system failures
The cooling systems in these models are known to have issues with the radiator, water pump, and thermostat, leading to overheating.
Vacuum leaks
The intake manifold and various vacuum lines can develop leaks over time, causing rough idling and poor performance.
Worn timing belt/chain
Depending on the specific engine, the timing belt or chain can wear out, leading to potential engine damage if not replaced timely.
Faulty ignition coils
Ignition coils can fail, causing misfires and poor engine performance.
Fuel injector problems
Clogged or failing fuel injectors can lead to uneven engine performance and reduced fuel efficiency.
Valve cover gasket failure
The valve cover gasket is prone to leaking, which can cause oil to seep into the spark plug wells.
Mass air flow (maf) sensor issues
A failing MAF sensor can cause the engine to run lean or rich, affecting performance and fuel economy.
Crankshaft position sensor failure
A faulty sensor can result in intermittent stalling or a no-start condition.
Idle control valve problems
The idle control valve can become dirty or fail, leading to unstable idle speeds.
BMW 325iC 1991
This 1991 BMW 325iC is a classic convertible with a 2.5L six-cylinder engine, producing 168 horsepower. Manufactured in Regensburg, Germany, it features a manual seat belt system and the Dr. Supplemental Restraint System (SRS). As part of the E30 series, this Cabrio offers a blend of vintage charm and BMW engineering excellence. Perfect for those who appreciate timeless design and open-top driving.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Older BMW engines, like the one in the 1991 325iC, are known for developing oil leaks due to aged gaskets and seals.
Coolant leaks
The cooling system in older BMW models can develop leaks, often from the radiator, hoses, or the water pump.
Overheating
Due to age and potential wear, the cooling system might not function efficiently, leading to engine overheating.
Timing belt/chain issues
The timing belt or chain can wear out, which may cause engine misfires or even severe engine damage if not replaced timely.
Vacuum leaks
The rubber vacuum hoses in older BMWs can deteriorate over time, causing rough idling and performance issues.
Fuel injector problems
Dirty or faulty fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Electrical issues
Aging wiring and connectors can cause various electrical problems, affecting engine performance and reliability.
Spark plug failure
Worn or fouled spark plugs can result in misfires, poor fuel economy, and reduced engine performance.
Valve cover gasket failure
The valve cover gasket is prone to leaking oil, which can cause engine performance issues and potential damage if not addressed.
Mass air flow sensor failure
A faulty mass air flow sensor can lead to incorrect air-fuel mixture, causing poor engine performance and fuel economy.
BMW 325iC 1991
Experience the thrill of open-air driving in the classic 1991 BMW 325iC Cabriolet. Powered by a robust 2.5L 6-cylinder engine producing 168 horsepower, this German-engineered convertible embodies the essence of driving pleasure. With its sleek design and luxurious features, the 325iC is a timeless icon of BMW’s 3 Series E30 lineup.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Older BMW engines, like the one in the 1991 325iC, are known for developing oil leaks due to aged gaskets and seals.
Coolant leaks
The cooling system in older BMW models can develop leaks, often from the radiator, hoses, or the water pump.
Overheating
Due to age and potential wear, the cooling system might not function efficiently, leading to engine overheating.
Timing belt/chain issues
The timing belt or chain can wear out, which may cause engine misfires or even severe engine damage if not replaced timely.
Vacuum leaks
The rubber vacuum hoses in older BMWs can deteriorate over time, causing rough idling and performance issues.
Fuel injector problems
Dirty or faulty fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Electrical issues
Aging wiring and connectors can cause various electrical problems, affecting engine performance and reliability.
Spark plug failure
Worn or fouled spark plugs can result in misfires, poor fuel economy, and reduced engine performance.
Valve cover gasket failure
The valve cover gasket is prone to leaking oil, which can cause engine performance issues and potential damage if not addressed.
Mass air flow sensor failure
A faulty mass air flow sensor can lead to incorrect air-fuel mixture, causing poor engine performance and fuel economy.