Most Common Car Issues

Selected parameters

Add more parameters

Engine Manufacturer

Engine Model

Engine Number of Cylinders

Make

Model Year

MOST COMMON PROBLEMS

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic sedan/saloon from the renowned BMW AG, featuring a 2.5-liter inline-six engine with 168 horsepower. Manufactured in Regensburg, Germany, this model comes with a 2-door configuration and an automatic transmission. It's part of the iconic E30 series, known for its blend of performance and style. This vehicle is a testament to BMW's engineering prowess in the late '80s, offering a thrilling driving experience with its gasoline-powered engine.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Model

4-Value

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks are common in older BMW engines due to worn gaskets and seals, particularly around the valve cover and oil pan.

Cooling system issues

BMW engines from this era often experience problems with the cooling system, including radiator leaks, thermostat failures, and water pump issues.

Vacuum leaks

Vacuum leaks can occur in various parts of the engine, causing rough idling, poor fuel economy, and decreased performance.

Timing belt/chain problems

Over time, the timing belt or chain can wear out or become misaligned, leading to engine performance issues or even catastrophic engine failure.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause misfires, poor acceleration, and rough running.

Ignition system issues

Problems with the ignition system, such as worn spark plugs, faulty ignition coils, or a failing distributor, can lead to engine misfires and poor performance.

Head gasket failure

A blown head gasket can cause coolant and oil to mix, leading to overheating and severe engine damage.

Camshaft and lifters wear

Over time, the camshaft and lifters can wear out, resulting in reduced engine performance and increased noise.

Intake manifold gasket leaks

Leaks in the intake manifold gasket can cause vacuum leaks and poor engine performance.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause the engine to stall, have starting issues, or run erratically.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic sedan/saloon from the renowned BMW AG, featuring a 2.5L inline-six engine that delivers 168 horsepower. Manufactured in Germany, this model belongs to the E30 series and is equipped with an automatic transmission. With its distinct two-door design and manual seat belts, it offers a vintage driving experience powered by gasoline.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Model

4-Value

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks are common in older BMW engines due to worn gaskets and seals, particularly around the valve cover and oil pan.

Cooling system issues

BMW engines from this era often experience problems with the cooling system, including radiator leaks, thermostat failures, and water pump issues.

Vacuum leaks

Vacuum leaks can occur in various parts of the engine, causing rough idling, poor fuel economy, and decreased performance.

Timing belt/chain problems

Over time, the timing belt or chain can wear out or become misaligned, leading to engine performance issues or even catastrophic engine failure.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause misfires, poor acceleration, and rough running.

Ignition system issues

Problems with the ignition system, such as worn spark plugs, faulty ignition coils, or a failing distributor, can lead to engine misfires and poor performance.

Head gasket failure

A blown head gasket can cause coolant and oil to mix, leading to overheating and severe engine damage.

Camshaft and lifters wear

Over time, the camshaft and lifters can wear out, resulting in reduced engine performance and increased noise.

Intake manifold gasket leaks

Leaks in the intake manifold gasket can cause vacuum leaks and poor engine performance.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause the engine to stall, have starting issues, or run erratically.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic sedan with a sporty edge, produced by BMW AG in Regensburg, Germany. Featuring a 2.5-liter inline-six engine capable of delivering 168 horsepower, this vehicle is part of the renowned E30 series. With a stylish two-door design, it embraces both performance and elegance, driven by its automatic transmission and fueled by gasoline. A true embodiment of BMW's engineering prowess from the late '80s.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Model

4-Value

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks are common in older BMW engines due to worn gaskets and seals, particularly around the valve cover and oil pan.

Cooling system issues

BMW engines from this era often experience problems with the cooling system, including radiator leaks, thermostat failures, and water pump issues.

Vacuum leaks

Vacuum leaks can occur in various parts of the engine, causing rough idling, poor fuel economy, and decreased performance.

Timing belt/chain problems

Over time, the timing belt or chain can wear out or become misaligned, leading to engine performance issues or even catastrophic engine failure.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause misfires, poor acceleration, and rough running.

Ignition system issues

Problems with the ignition system, such as worn spark plugs, faulty ignition coils, or a failing distributor, can lead to engine misfires and poor performance.

Head gasket failure

A blown head gasket can cause coolant and oil to mix, leading to overheating and severe engine damage.

Camshaft and lifters wear

Over time, the camshaft and lifters can wear out, resulting in reduced engine performance and increased noise.

Intake manifold gasket leaks

Leaks in the intake manifold gasket can cause vacuum leaks and poor engine performance.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause the engine to stall, have starting issues, or run erratically.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic 2-door sedan from the E30 series, boasting a 2.5L inline-6 engine delivering 168 hp. Manufactured in Germany, this iconic model features an automatic transmission and runs on gasoline. Known for its sporty performance and timeless design, it remains a favorite among car enthusiasts.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Model

4-Value

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks are common in older BMW engines due to worn gaskets and seals, particularly around the valve cover and oil pan.

Cooling system issues

BMW engines from this era often experience problems with the cooling system, including radiator leaks, thermostat failures, and water pump issues.

Vacuum leaks

Vacuum leaks can occur in various parts of the engine, causing rough idling, poor fuel economy, and decreased performance.

Timing belt/chain problems

Over time, the timing belt or chain can wear out or become misaligned, leading to engine performance issues or even catastrophic engine failure.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause misfires, poor acceleration, and rough running.

Ignition system issues

Problems with the ignition system, such as worn spark plugs, faulty ignition coils, or a failing distributor, can lead to engine misfires and poor performance.

Head gasket failure

A blown head gasket can cause coolant and oil to mix, leading to overheating and severe engine damage.

Camshaft and lifters wear

Over time, the camshaft and lifters can wear out, resulting in reduced engine performance and increased noise.

Intake manifold gasket leaks

Leaks in the intake manifold gasket can cause vacuum leaks and poor engine performance.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause the engine to stall, have starting issues, or run erratically.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic 2-door sedan powered by a 2.5L inline-6 engine, producing 168 horsepower. Manufactured by BMW AG in Regensburg, Germany, this E30 series model runs on gasoline and features manual seat belts. It's an iconic member of the 3 Series lineup, known for its balanced performance and driving dynamics.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 1989 325i/325is, often develop oil leaks around the valve cover gasket, oil pan gasket, and rear main seal.

Cooling system failures

The cooling systems can be prone to failures, including issues with the radiator, water pump, and thermostat, which can lead to overheating.

Timing belt wear

The timing belt in these engines can wear out and needs to be replaced regularly to prevent engine damage.

Vacuum leaks

Vacuum hoses and intake boots can deteriorate over time, leading to rough idling and poor engine performance.

Fuel pump issues

The fuel pump can become weak or fail, causing starting problems or stalling.

Ignition system problems

Issues with the distributor cap, rotor, spark plugs, and ignition wires can cause misfires and poor engine performance.

Head gasket failure

Overheating or high mileage can lead to head gasket failure, resulting in coolant leaks and engine overheating.

Mass air flow (maf) sensor problems

A faulty MAF sensor can cause poor fuel economy and rough running conditions.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic 2-door sedan with a 2.5L inline-6 engine producing 168 horsepower. Manufactured by BMW AG in Germany, this E30 series model features an automatic transmission and runs on gasoline. With its robust engineering and sporty design, it remains an iconic vehicle in the BMW 3 Series lineup.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Model

4-Value

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks are common in older BMW engines due to worn gaskets and seals, particularly around the valve cover and oil pan.

Cooling system issues

BMW engines from this era often experience problems with the cooling system, including radiator leaks, thermostat failures, and water pump issues.

Vacuum leaks

Vacuum leaks can occur in various parts of the engine, causing rough idling, poor fuel economy, and decreased performance.

Timing belt/chain problems

Over time, the timing belt or chain can wear out or become misaligned, leading to engine performance issues or even catastrophic engine failure.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause misfires, poor acceleration, and rough running.

Ignition system issues

Problems with the ignition system, such as worn spark plugs, faulty ignition coils, or a failing distributor, can lead to engine misfires and poor performance.

Head gasket failure

A blown head gasket can cause coolant and oil to mix, leading to overheating and severe engine damage.

Camshaft and lifters wear

Over time, the camshaft and lifters can wear out, resulting in reduced engine performance and increased noise.

Intake manifold gasket leaks

Leaks in the intake manifold gasket can cause vacuum leaks and poor engine performance.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause the engine to stall, have starting issues, or run erratically.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic 2-door sedan powered by a 2.5L inline-6 engine, producing 168 horsepower. Manufactured in Regensburg, Germany, this E30 series model exemplifies BMW's engineering prowess and driving pleasure.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 1989 325i/325is, often develop oil leaks around the valve cover gasket, oil pan gasket, and rear main seal.

Cooling system failures

The cooling systems can be prone to failures, including issues with the radiator, water pump, and thermostat, which can lead to overheating.

Timing belt wear

The timing belt in these engines can wear out and needs to be replaced regularly to prevent engine damage.

Vacuum leaks

Vacuum hoses and intake boots can deteriorate over time, leading to rough idling and poor engine performance.

Fuel pump issues

The fuel pump can become weak or fail, causing starting problems or stalling.

Ignition system problems

Issues with the distributor cap, rotor, spark plugs, and ignition wires can cause misfires and poor engine performance.

Head gasket failure

Overheating or high mileage can lead to head gasket failure, resulting in coolant leaks and engine overheating.

Mass air flow (maf) sensor problems

A faulty MAF sensor can cause poor fuel economy and rough running conditions.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic 2-door sedan from the E30 series, featuring a 2.5-liter inline-6 engine producing 168 hp. Manufactured in Germany, this vehicle runs on gasoline and reflects the renowned engineering of BMW AG. Ideal for enthusiasts of vintage BMWs, it offers a blend of performance and nostalgic charm.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 1989 325i/325is, often develop oil leaks around the valve cover gasket, oil pan gasket, and rear main seal.

Cooling system failures

The cooling systems can be prone to failures, including issues with the radiator, water pump, and thermostat, which can lead to overheating.

Timing belt wear

The timing belt in these engines can wear out and needs to be replaced regularly to prevent engine damage.

Vacuum leaks

Vacuum hoses and intake boots can deteriorate over time, leading to rough idling and poor engine performance.

Fuel pump issues

The fuel pump can become weak or fail, causing starting problems or stalling.

Ignition system problems

Issues with the distributor cap, rotor, spark plugs, and ignition wires can cause misfires and poor engine performance.

Head gasket failure

Overheating or high mileage can lead to head gasket failure, resulting in coolant leaks and engine overheating.

Mass air flow (maf) sensor problems

A faulty MAF sensor can cause poor fuel economy and rough running conditions.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic 2-door sedan powered by a 2.5L inline-6 engine from BMW-AG, producing 168 horsepower. Manufactured in Regensburg, Germany, this E30 series model is known for its robust performance and iconic design. As a member of the BMW 3 Series, it offers a blend of sportiness and elegance, making it a favorite among enthusiasts.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 1989 325i/325is, often develop oil leaks around the valve cover gasket, oil pan gasket, and rear main seal.

Cooling system failures

The cooling systems can be prone to failures, including issues with the radiator, water pump, and thermostat, which can lead to overheating.

Timing belt wear

The timing belt in these engines can wear out and needs to be replaced regularly to prevent engine damage.

Vacuum leaks

Vacuum hoses and intake boots can deteriorate over time, leading to rough idling and poor engine performance.

Fuel pump issues

The fuel pump can become weak or fail, causing starting problems or stalling.

Ignition system problems

Issues with the distributor cap, rotor, spark plugs, and ignition wires can cause misfires and poor engine performance.

Head gasket failure

Overheating or high mileage can lead to head gasket failure, resulting in coolant leaks and engine overheating.

Mass air flow (maf) sensor problems

A faulty MAF sensor can cause poor fuel economy and rough running conditions.

BMW 325i/325is 1989

The 1989 BMW 325i/325is is a classic 2-door sedan powered by a 2.5L inline-6 engine producing 168 hp. Manufactured in Regensburg, Germany, this E30 series model is part of BMW's renowned 3 Series. It runs on gasoline and features manual seat belts, embodying the quintessential BMW driving experience of the late '80s.

Spec:

Engine Brake (hp) From

168

Engine Manufacturer

BMW-AG

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 1989 325i/325is, often develop oil leaks around the valve cover gasket, oil pan gasket, and rear main seal.

Cooling system failures

The cooling systems can be prone to failures, including issues with the radiator, water pump, and thermostat, which can lead to overheating.

Timing belt wear

The timing belt in these engines can wear out and needs to be replaced regularly to prevent engine damage.

Vacuum leaks

Vacuum hoses and intake boots can deteriorate over time, leading to rough idling and poor engine performance.

Fuel pump issues

The fuel pump can become weak or fail, causing starting problems or stalling.

Ignition system problems

Issues with the distributor cap, rotor, spark plugs, and ignition wires can cause misfires and poor engine performance.

Head gasket failure

Overheating or high mileage can lead to head gasket failure, resulting in coolant leaks and engine overheating.

Mass air flow (maf) sensor problems

A faulty MAF sensor can cause poor fuel economy and rough running conditions.