Most Common Car Issues

Selected parameters

Add more parameters

Engine Brake (hp) To

Engine Configuration

Engine Manufacturer

Engine Model

Engine Number of Cylinders

Engine Stroke Cycles

Make

Model Year

MOST COMMON PROBLEMS

LEXUS IS 2002

The 2002 Lexus IS, produced by Toyota Motor Corporation, is a sleek sedan with a 3.0-liter in-line 6-cylinder engine, delivering between 215 and 227 horsepower. Designed for comfort and safety, it features airbag protection in the 1st row for both driver and passenger, along with multipoint fuel injection for efficient performance. Built in Japan at Kanto Auto Works, this 4-door model combines luxury with reliable engineering.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2003

The 2003 Lexus IS 300, manufactured by Toyota Motor Corporation, is a sleek sedan powered by a 3.0-liter inline-six engine producing between 215 to 227 horsepower. This rear-wheel-drive vehicle features a multipoint fuel injection system and offers comprehensive safety with airbags in the first row for both driver and passenger. Built in Kanegasaki, Japan, the IS 300 combines luxury with performance, ensuring a smooth and safe ride for its occupants. With a manual seat belt system and a gross vehicle weight rating of class 1, it is designed for those who appreciate a balance of comfort and agility.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.

LEXUS IS 2002

The 2002 Lexus IS, manufactured by Toyota Motor Corporation in Kanegasaki, Japan, is a sleek sedan featuring a 3.0L in-line 6-cylinder engine. With a horsepower range of 215-227 hp, it offers a smooth drive with 4x2 drive type. Safety features include front and side airbags for the driver and passenger. This model is equipped with multipoint fuel injection and runs on gasoline.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2001

The 2001 Lexus IS, manufactured by Toyota Motor Corporation, is a refined sedan powered by a 3.0L 2JZ-GE in-line 6-cylinder engine, delivering between 215 to 227 hp. This 4-door passenger car features multipoint fuel injection, is driven by a 4x2 drivetrain, and offers safety with front and side airbags for the driver and passenger. Built in Kanegasaki, Japan, it's a sophisticated blend of performance and luxury.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

The 2JZ-GE engine can develop oil leaks, often from the valve cover gasket or camshaft seals.

Timing belt wear

This engine uses a timing belt that requires regular replacement to avoid engine damage.

Idle problems

Issues with the idle air control valve can cause rough or unstable idling.

Overheating

Radiator or water pump failures can lead to engine overheating.

Sensor failures

Common problems include malfunctioning oxygen sensors and mass air flow sensors.

Ignition coil failure

The ignition coils may fail, leading to misfires and poor engine performance.

Fuel injector problems

Dirty or failing fuel injectors can cause poor fuel economy and reduced engine performance.

Head gasket issues

Over time, the head gasket may fail, leading to coolant leaks and potential engine overheating.

Vacuum leaks

Aging rubber hoses can crack and cause vacuum leaks, leading to performance issues.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased noise.

LEXUS IS 2002

The 2002 Lexus IS, manufactured by Toyota Motor Corporation in Kanegasaki, Japan, is a refined sedan boasting a 3.0L 2JZ-GE inline-six engine delivering 215-227 hp. This four-door, 4x2 drive vehicle offers comprehensive safety features, including front and side airbags for both driver and passenger, and a manual seat belt system. With a gross vehicle weight rating of up to 6,000 lbs, it ensures a balanced blend of performance and safety.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2003

The 2003 Lexus IS 300, manufactured by Toyota Motor Corporation in Kanegasaki, Japan, features a 3.0L 2JZ-GE inline-six engine with 215-227 hp. This hatchback includes first-row curtain and side airbags, multipoint fuel injection, and a 4x2 drive type. Known for its blend of performance and luxury, it's a solid choice for enthusiasts and daily drivers alike.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.

LEXUS IS 2002

The 2002 Lexus IS, manufactured by Toyota Motor Corporation, features a robust 2JZ-GE 3.0L in-line 6-cylinder engine, offering between 215 to 227 horsepower. This passenger car comes equipped with comprehensive safety features, including curtain and side airbags for the driver and passenger in the 1st row. Produced in Kanegasaki, Japan, by Kanto Auto Works, LTD., it utilizes a multipoint fuel injection system and runs on gasoline.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2002

The 2002 Lexus IS, produced by Toyota Motor Corporation in Kanegasaki, Japan, features a 3.0L In-Line 6-cylinder engine (2JZ-GE) with horsepower ranging from 215 to 227. Equipped with multipoint fuel injection, it uses gasoline as its primary fuel. Safety features include curtain, front, and side airbags for the driver and passenger in the first row. This passenger car falls under the series JCE10/JCE10L and 300.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2004

The 2004 Lexus IS 300 is a stylish sedan powered by a 3.0L inline-6 engine from Toyota, delivering between 215 and 227 hp. It features comprehensive safety with front, side, and curtain airbags in the first row. Manufactured in Kanegasaki, Japan by Toyota Motor Corporation, this model offers a smooth, reliable drive with multipoint fuel injection and a robust manual seat belt system.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

The 2JZ-GE engine is known for developing oil leaks, particularly around the valve cover gaskets and the front main seal.

Ignition coil failures

The ignition coils in the 2JZ-GE can fail over time, leading to misfires and poor engine performance.

Timing belt wear

Being a 4-stroke engine, the 2JZ-GE requires periodic timing belt replacements. If neglected, the belt can wear out and potentially cause engine damage.

Overheating

Cooling system issues, such as a failing water pump or a clogged radiator, can lead to engine overheating in the 2JZ-GE.

Vacuum leaks

Vacuum hoses and intake manifold gaskets can deteriorate over time, causing vacuum leaks and rough idling.

Mass air flow sensor malfunction

The MAF sensor can get dirty or fail, leading to incorrect air-fuel mixture and poor engine performance.

Pcv valve issues

A clogged or faulty PCV valve can cause excessive oil consumption and engine sludge buildup.

Fuel injector problems

Fuel injectors can become clogged or leak, resulting in poor fuel economy and engine misfires.

Oxygen sensor failure

Faulty oxygen sensors can cause incorrect fuel mixture readings, leading to poor fuel economy and emissions issues.

Spark plug wear

Worn or fouled spark plugs can cause misfires, rough idling, and poor acceleration.

LEXUS IS 2002

The 2002 Lexus IS, manufactured by Toyota Motor Corporation, is a sleek sedan powered by a 3.0L inline-6 engine (2JZ-GE) producing between 215-227 hp. This rear-wheel-drive vehicle features multipoint fuel injection, comprehensive airbag coverage, and a manual seat belt system. Built in Kanegasaki, Japan, it offers a balance of performance and safety typical of the Lexus brand.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2003

The 2003 Lexus IS 300 is a stylish sedan powered by a 3.0L inline-6 engine, delivering 215-227 hp. Manufactured by Toyota Motor Corporation, this model features comprehensive safety with airbags for both driver and passenger. With a fuel-efficient multipoint fuel injection system, it offers a smooth and reliable drive. Built in Japan, it combines luxury and performance effortlessly.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.

LEXUS IS 2003

The 2003 Lexus IS 300 is a sleek sedan powered by a 3.0L inline-6 engine from Toyota, delivering between 215 to 227 horsepower. With a 4x2 drive type, it features multiple safety elements including front, side, and curtain airbags for both the driver and passenger. Manufactured by Toyota Motor Corporation in Japan, this vehicle stands out for its reliability and refined engineering.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.

LEXUS IS 2003

The 2003 Lexus IS 300, manufactured by Toyota Motor Corporation in Japan, is a stylish sedan with a robust 3.0L inline-6 engine producing between 215 to 227 hp. It features comprehensive safety with front, side, and curtain airbags for the first row, and utilizes multipoint fuel injection for efficient gasoline delivery. This 4x2 drive vehicle combines performance and safety, making it a reliable passenger car.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.

LEXUS IS 2002

The 2002 Lexus IS, manufactured by Toyota Motor Corporation, features a 3.0L, 6-cylinder in-line engine (2JZ-GE) with a displacement of 2997 CC, delivering between 215 to 227 hp. Safety features include curtain, front, and side airbags for both the driver and passenger in the 1st row. This passenger car employs multipoint fuel injection and runs on gasoline, built in KANEGASAKI, Japan by Kanto Auto Works, LTD.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2002

The 2002 Lexus IS, manufactured by Toyota Motor Corporation, is a sleek sedan powered by a 3.0L in-line 6-cylinder engine, producing between 215 to 227 hp. It features multipoint fuel injection, curtain and side airbags for the 1st row, and manual seat belts. Built in Kanegasaki, Japan, this vehicle offers a blend of performance and safety in a stylish four-door package.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2003

The 2003 Lexus IS 300 is a sophisticated sedan powered by a 3.0L inline-six engine delivering between 215 to 227 hp. With multipoint fuel injection and a sturdy 4x2 drive type, it offers a smooth yet powerful ride. Safety is paramount, featuring airbags in the front and side for both the driver and passenger. Manufactured by Toyota Motor Corporation in Japan, this vehicle combines luxury and reliability.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.

LEXUS IS 2001

The 2001 Lexus IS, manufactured by Toyota Motor Corporation, is a stylish sedan powered by the renowned 3.0L 2JZ-GE inline-six engine, producing between 215 to 227 hp. This model features a 4x2 drive type, multipoint fuel injection, and comprehensive safety with front and side airbags for the driver and passenger. Built in Kanegasaki, Japan, it offers a blend of performance and luxury typical of Lexus.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

The 2JZ-GE engine can develop oil leaks, often from the valve cover gasket or camshaft seals.

Timing belt wear

This engine uses a timing belt that requires regular replacement to avoid engine damage.

Idle problems

Issues with the idle air control valve can cause rough or unstable idling.

Overheating

Radiator or water pump failures can lead to engine overheating.

Sensor failures

Common problems include malfunctioning oxygen sensors and mass air flow sensors.

Ignition coil failure

The ignition coils may fail, leading to misfires and poor engine performance.

Fuel injector problems

Dirty or failing fuel injectors can cause poor fuel economy and reduced engine performance.

Head gasket issues

Over time, the head gasket may fail, leading to coolant leaks and potential engine overheating.

Vacuum leaks

Aging rubber hoses can crack and cause vacuum leaks, leading to performance issues.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased noise.

LEXUS IS 2003

The 2003 Lexus IS 300 is a stylish hatchback powered by the renowned Toyota 2JZ-GE inline-six engine, delivering between 215 to 227 hp. Built in Japan by Toyota Motor Corporation, this model features advanced safety with front, side, and curtain airbags for the driver and passenger. Its 3.0L engine utilizes multipoint fuel injection, making it a reliable and efficient choice for enthusiasts.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.

LEXUS IS 2002

The 2002 Lexus IS, manufactured by Toyota Motor Corporation, is a sleek sedan equipped with a 3.0L in-line 6-cylinder engine, delivering between 215 to 227 hp. It features comprehensive safety options with curtain, front, and side airbags for the driver and passenger. This model comes with a multipoint fuel injection system and runs on gasoline. Built in Kanegasaki, Japan, it combines luxurious comfort with reliable performance.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2002

The 2002 Lexus IS, manufactured by Toyota Motor Corporation in Kanegasaki, Japan, is powered by a 3.0L Inline-6 engine (2JZ-GE) with multipoint fuel injection. Delivering 215-227 hp, it features curtain, front, and side airbags for both the driver and passenger. This passenger car belongs to the JCE10/JCE10L series and is equipped with manual seat belts.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2003

The 2003 Lexus IS 300 is a sleek sedan powered by a 3.0L inline-6 engine, producing between 215 to 227 hp. Manufactured by Toyota, it features multipoint fuel injection and a 4x2 drive type. Safety is paramount with front, side, and curtain airbags for the driver and passenger. This model showcases the engineering excellence of the Toyota Motor Corporation, built in Kanegasaki, Japan.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.

LEXUS IS 2001

The 2001 Lexus IS is a sleek sedan powered by a 3.0L in-line 6-cylinder engine, delivering between 215 to 227 horsepower. Manufactured by Toyota Motor Corporation in Japan, this model features multipoint fuel injection and a 4x2 drive type. With advanced safety features like front and side airbags for the first row, this vehicle ensures a secure driving experience.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

The 2JZ-GE engine can develop oil leaks, often from the valve cover gasket or camshaft seals.

Timing belt wear

This engine uses a timing belt that requires regular replacement to avoid engine damage.

Idle problems

Issues with the idle air control valve can cause rough or unstable idling.

Overheating

Radiator or water pump failures can lead to engine overheating.

Sensor failures

Common problems include malfunctioning oxygen sensors and mass air flow sensors.

Ignition coil failure

The ignition coils may fail, leading to misfires and poor engine performance.

Fuel injector problems

Dirty or failing fuel injectors can cause poor fuel economy and reduced engine performance.

Head gasket issues

Over time, the head gasket may fail, leading to coolant leaks and potential engine overheating.

Vacuum leaks

Aging rubber hoses can crack and cause vacuum leaks, leading to performance issues.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased noise.

LEXUS IS 2002

The 2002 Lexus IS sedan, manufactured by Toyota Motor Corporation, features a 3.0L in-line 6-cylinder engine (2JZ-GE) producing 215-227 hp. It boasts comprehensive safety with airbags in the front, side, and curtain locations for both driver and passenger. Built in Japan, this model offers multipoint fuel injection and a 4x2 drive type.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes consume more oil than expected, which may require more frequent oil checks and top-ups.

Valve stem seal wear

Over time, the valve stem seals can wear out, leading to oil leaks and potential engine performance issues.

Timing belt wear

The timing belt on the 2JZ-GE needs regular replacement to avoid the risk of it snapping and causing severe engine damage.

Head gasket failure

This engine can experience head gasket problems, leading to coolant leaks and potential overheating issues.

Cooling system issues

The cooling system, including the radiator and water pump, can develop leaks or fail, leading to overheating problems.

Fuel injector problems

Fuel injectors can become clogged or faulty, affecting engine performance and fuel efficiency.

Ignition coil failure

Ignition coils may fail over time, causing misfires and reduced engine performance.

Idle air control valve issues

The idle air control valve can become dirty or fail, leading to erratic idling and stalling issues.

Oxygen sensor failure

Faulty oxygen sensors can result in poor fuel economy and increased emissions.

Crankshaft position sensor failure

A failing crankshaft position sensor can cause starting issues and engine stalling.

LEXUS IS 2001

The 2001 Lexus IS is a refined sedan featuring a 3.0L inline-6 engine, known as the 2JZ-GE, delivering between 215 and 227 hp. Manufactured in Japan by Toyota Motor Corporation, this 4-door vehicle offers a smooth 4x2 drive and is equipped with multipoint fuel injection. It ensures safety with airbags for the driver and passenger in the first row. This model is part of the JCE10/JCE10L Series and maintains a gross vehicle weight rating of 6,000 lb or less.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil leaks

The 2JZ-GE engine can develop oil leaks, often from the valve cover gasket or camshaft seals.

Timing belt wear

This engine uses a timing belt that requires regular replacement to avoid engine damage.

Idle problems

Issues with the idle air control valve can cause rough or unstable idling.

Overheating

Radiator or water pump failures can lead to engine overheating.

Sensor failures

Common problems include malfunctioning oxygen sensors and mass air flow sensors.

Ignition coil failure

The ignition coils may fail, leading to misfires and poor engine performance.

Fuel injector problems

Dirty or failing fuel injectors can cause poor fuel economy and reduced engine performance.

Head gasket issues

Over time, the head gasket may fail, leading to coolant leaks and potential engine overheating.

Vacuum leaks

Aging rubber hoses can crack and cause vacuum leaks, leading to performance issues.

Exhaust manifold cracks

The exhaust manifold can develop cracks over time, leading to exhaust leaks and increased noise.

LEXUS IS 2003

The 2003 Lexus IS 300 is a sleek sedan powered by the renowned 2JZ-GE inline-six engine, delivering between 215 and 227 horsepower. Manufactured by Toyota Motor Corporation in Japan, this model offers robust safety features, including front, side, and curtain airbags for the first row. With a 3.0L displacement and multipoint fuel injection, it blends performance and reliability. Ideal for those seeking a balance of luxury and engineering excellence.

Spec:

Engine Brake (hp) From

215

Engine Brake (hp) To

227

Engine Configuration

In-Line

Engine Manufacturer

Toyota

Engine Model

2JZ-GE

Engine Number of Cylinders

Engine Stroke Cycles

Problems:

Oil consumption

The 2JZ-GE engine can sometimes experience higher-than-normal oil consumption due to worn piston rings or valve seals.

Timing belt wear

Over time, the timing belt can wear out or stretch, leading to potential engine timing issues or even catastrophic engine damage if it breaks.

Ignition coil failure

The ignition coils on the 2JZ-GE engine may fail, causing misfires, rough idling, and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to erratic engine behavior and poor fuel economy.

Camshaft position sensor failure

A faulty camshaft position sensor can cause starting issues, misfires, and poor engine performance.

Overheating

The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to engine overheating.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause poor engine performance, rough idling, and reduced fuel efficiency.

Head gasket issues

Though less common, the engine can develop head gasket problems, leading to coolant leaks and potential engine overheating.

Throttle body issues

A dirty or malfunctioning throttle body can cause erratic idling and poor throttle response.

Sensor failures

Various sensors, including the oxygen sensor and mass air flow sensor, can fail and lead to poor engine performance and efficiency.