Most Common Car Issues

Selected parameters

Add more parameters

MOST COMMON PROBLEMS

PORSCHE Boxster 2015

The 2015 Porsche Boxster is a sleek convertible with a powerful 2.7L engine, producing 265 horsepower from its 6-cylinder configuration. This model blends performance with luxury, embodying the iconic Porsche design and engineering. With a gross vehicle weight rating of up to 3,693 lbs, it offers agility and comfort for an exhilarating driving experience. Manufactured in Stuttgart-Zuffenhausen, Germany, it stands as a testament to Porsche's commitment to quality and performance.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Common in the Porsche Boxster, especially around the rear main seal and valve covers, leading to oil spots under the vehicle.

Ims bearing failure

The intermediate shaft (IMS) bearing can fail, causing significant engine damage if not addressed.

Coolant leaks

Issues with the coolant reservoir can lead to leaks and potential overheating.

Rms (rear main seal) failure

The rear main seal can degrade over time, causing oil leaks and potential clutch contamination.

Cylinder scoring

Premature wear on the cylinder walls can occur, leading to loss of compression and engine performance issues.

Timing chain tensioner failure

The tensioner can fail, leading to timing chain issues and potential engine damage.

PORSCHE Boxster 2014

The 2014 Porsche Boxster is a sleek, two-door convertible that offers an exhilarating driving experience with its 2.7L engine and 265 horsepower. Manufactured by DR. ING. H.C.F. Porsche AG in Stuttgart-Zuffenhausen, Germany, this model is part of the Type 981 series. With its classic design and powerful six-cylinder engine, the Boxster is a perfect blend of performance and style for driving enthusiasts.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Commonly caused by worn gaskets or seals, oil leaks can lead to low oil levels and potential engine damage if not addressed.

Ims bearing failure

The intermediate shaft (IMS) bearing has been a known issue in some Porsche models, leading to catastrophic engine failure if it fails.

Coolant leaks

Cracked coolant reservoirs or failing water pumps can cause coolant leaks, leading to overheating and potential engine damage.

Cylinder scoring

Wear and tear over time can cause scoring in the cylinder walls, leading to reduced performance and increased oil consumption.

Timing chain issues

Worn timing chain guides or tensioners can lead to timing chain failure, which can cause severe engine damage.

Vacuum leaks

Faulty vacuum lines or components can cause air leaks, leading to poor engine performance and rough idling.

Mass air flow (maf) sensor failure

A failing MAF sensor can cause issues with air-fuel mixture, leading to poor fuel economy and performance.

PORSCHE 718 Boxster 2017

The 2017 Porsche 718 Boxster is a sleek convertible powered by a 2.7L, 6-cylinder engine generating 265 horsepower. Manufactured in Stuttgart-Zuffenhausen, Germany, this model features advanced safety with front and side airbags for both driver and passenger. With a gross vehicle weight rating up to 3,693 lbs, this stylish cabriolet offers an exhilarating driving experience.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Porsche engines, including the one in the 2017 718 Boxster, are known to develop oil leaks over time, often from the valve cover gaskets or rear main seal.

Coolant leaks

Issues with coolant lines and connections can lead to leaks, which may cause the engine to overheat if not addressed promptly.

Ignition coil failure

The ignition coils in Porsche vehicles can fail, causing misfires and reduced engine performance.

Turbocharger issues

The turbocharged engine in the 718 Boxster can face problems like turbo lag or failure, which affects overall power delivery.

Timing chain tensioner problems

A faulty timing chain tensioner can lead to improper engine timing, resulting in poor performance and potential engine damage.

Piston ring wear

Over time, the piston rings can wear out, leading to loss of compression and increased oil consumption.

Fuel injector problems

Clogged or failing fuel injectors can lead to poor fuel delivery, causing rough idling, reduced power, and increased emissions.

Carbon build-up

Direct injection engines, like the one in the 2017 718 Boxster, are prone to carbon build-up on intake valves, which can affect performance and fuel efficiency.

O2 sensor failure

Faulty oxygen sensors can cause incorrect air-fuel mixture readings, leading to poor performance and increased emissions.

Water pump failure

The water pump may fail, leading to coolant leaks and potential engine overheating if not replaced in time.

PORSCHE Boxster 2014

The 2014 Porsche Boxster is a sleek convertible with a 2.7L engine delivering 265 horsepower. Manufactured by Dr. Ing. H.C.F. Porsche AG in Stuttgart-Zuffenhausen, Germany, this model features a 6-cylinder engine and a passive restraint system. With a GVWR between 3,627 and 3,693 lbs, it's a perfect blend of performance and luxury for any driving enthusiast.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Commonly caused by worn gaskets or seals, oil leaks can lead to low oil levels and potential engine damage if not addressed.

Ims bearing failure

The intermediate shaft (IMS) bearing has been a known issue in some Porsche models, leading to catastrophic engine failure if it fails.

Coolant leaks

Cracked coolant reservoirs or failing water pumps can cause coolant leaks, leading to overheating and potential engine damage.

Cylinder scoring

Wear and tear over time can cause scoring in the cylinder walls, leading to reduced performance and increased oil consumption.

Timing chain issues

Worn timing chain guides or tensioners can lead to timing chain failure, which can cause severe engine damage.

Vacuum leaks

Faulty vacuum lines or components can cause air leaks, leading to poor engine performance and rough idling.

Mass air flow (maf) sensor failure

A failing MAF sensor can cause issues with air-fuel mixture, leading to poor fuel economy and performance.

PORSCHE Boxster 2014

The 2014 Porsche Boxster is a sleek convertible with a 2.7L, 6-cylinder engine producing 265 hp. Crafted in Osnabrück, Germany, this sports car balances performance and luxury. It's designed for those who enjoy open-air driving with the refinement of a high-end vehicle.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Commonly caused by worn gaskets or seals, oil leaks can lead to low oil levels and potential engine damage if not addressed.

Ims bearing failure

The intermediate shaft (IMS) bearing has been a known issue in some Porsche models, leading to catastrophic engine failure if it fails.

Coolant leaks

Cracked coolant reservoirs or failing water pumps can cause coolant leaks, leading to overheating and potential engine damage.

Cylinder scoring

Wear and tear over time can cause scoring in the cylinder walls, leading to reduced performance and increased oil consumption.

Timing chain issues

Worn timing chain guides or tensioners can lead to timing chain failure, which can cause severe engine damage.

Vacuum leaks

Faulty vacuum lines or components can cause air leaks, leading to poor engine performance and rough idling.

Mass air flow (maf) sensor failure

A failing MAF sensor can cause issues with air-fuel mixture, leading to poor fuel economy and performance.

PORSCHE Boxster 2016

The 2016 Porsche Boxster is a sleek convertible powered by a 2.7L, 6-cylinder engine delivering 265 hp. Manufactured in Stuttgart-Zuffenhausen, Germany, this model features advanced safety with front and side airbags for the driver and passenger. It falls within the Class 1B weight range and includes a direct Tire Pressure Monitoring System (TPMS). Ideal for those who crave open-air driving with performance and luxury.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Common in Porsche Boxster engines, often due to worn seals or gaskets, especially around the valve covers and oil pan.

Ims bearing failure

Although less common in later models, intermediate shaft (IMS) bearing failure can lead to catastrophic engine damage.

Coolant leaks

The 6-cylinder engines can suffer from coolant leaks due to failing water pumps or cracked coolant reservoirs.

Timing chain issues

Timing chain tensioners and guides can wear out, causing rattling noises and potential engine damage if not addressed.

Fuel injector problems

Clogged or malfunctioning fuel injectors can cause misfires, poor fuel economy, and rough idling.

Air/oil separator failure

The air/oil separator can fail, leading to excessive oil consumption and smoking from the exhaust.

Spark plug and ignition coil failures

These components can wear out or fail, causing misfires and reduced engine performance.

PORSCHE 718 Boxster 2017

The 2017 Porsche 718 Boxster is a sleek 2-door convertible equipped with a 2.7L, 6-cylinder engine producing 265 hp. Manufactured in Stuttgart-Zuffenhausen, Germany, this lightweight sports car offers both front and side airbags for driver and passenger safety. It's an exhilarating drive with a focus on performance and style.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Porsche engines, including the one in the 2017 718 Boxster, are known to develop oil leaks over time, often from the valve cover gaskets or rear main seal.

Coolant leaks

Issues with coolant lines and connections can lead to leaks, which may cause the engine to overheat if not addressed promptly.

Ignition coil failure

The ignition coils in Porsche vehicles can fail, causing misfires and reduced engine performance.

Turbocharger issues

The turbocharged engine in the 718 Boxster can face problems like turbo lag or failure, which affects overall power delivery.

Timing chain tensioner problems

A faulty timing chain tensioner can lead to improper engine timing, resulting in poor performance and potential engine damage.

Piston ring wear

Over time, the piston rings can wear out, leading to loss of compression and increased oil consumption.

Fuel injector problems

Clogged or failing fuel injectors can lead to poor fuel delivery, causing rough idling, reduced power, and increased emissions.

Carbon build-up

Direct injection engines, like the one in the 2017 718 Boxster, are prone to carbon build-up on intake valves, which can affect performance and fuel efficiency.

O2 sensor failure

Faulty oxygen sensors can cause incorrect air-fuel mixture readings, leading to poor performance and increased emissions.

Water pump failure

The water pump may fail, leading to coolant leaks and potential engine overheating if not replaced in time.

PORSCHE 718 Boxster 2017

The 2017 Porsche 718 Boxster is a sleek convertible powered by a 2.7L, 6-cylinder engine delivering 265 horsepower. Manufactured in Stuttgart-Zuffenhausen, Germany, it offers top-notch safety features including front and side airbags for both driver and passenger. With a gross vehicle weight rating up to 3,693 lbs, this stylish roadster combines performance with luxury.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Porsche engines, including the one in the 2017 718 Boxster, are known to develop oil leaks over time, often from the valve cover gaskets or rear main seal.

Coolant leaks

Issues with coolant lines and connections can lead to leaks, which may cause the engine to overheat if not addressed promptly.

Ignition coil failure

The ignition coils in Porsche vehicles can fail, causing misfires and reduced engine performance.

Turbocharger issues

The turbocharged engine in the 718 Boxster can face problems like turbo lag or failure, which affects overall power delivery.

Timing chain tensioner problems

A faulty timing chain tensioner can lead to improper engine timing, resulting in poor performance and potential engine damage.

Piston ring wear

Over time, the piston rings can wear out, leading to loss of compression and increased oil consumption.

Fuel injector problems

Clogged or failing fuel injectors can lead to poor fuel delivery, causing rough idling, reduced power, and increased emissions.

Carbon build-up

Direct injection engines, like the one in the 2017 718 Boxster, are prone to carbon build-up on intake valves, which can affect performance and fuel efficiency.

O2 sensor failure

Faulty oxygen sensors can cause incorrect air-fuel mixture readings, leading to poor performance and increased emissions.

Water pump failure

The water pump may fail, leading to coolant leaks and potential engine overheating if not replaced in time.

PORSCHE Boxster 2014

The 2014 Porsche Boxster is a sleek convertible powered by a 2.7L, 6-cylinder engine delivering 265 horsepower. This German-engineered masterpiece from Stuttgart-Zuffenhausen offers a thrilling driving experience with its gasoline engine and passive restraint system. Weighing between 3,627 and 3,693 lbs, it's designed for both performance and style.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Commonly caused by worn gaskets or seals, oil leaks can lead to low oil levels and potential engine damage if not addressed.

Ims bearing failure

The intermediate shaft (IMS) bearing has been a known issue in some Porsche models, leading to catastrophic engine failure if it fails.

Coolant leaks

Cracked coolant reservoirs or failing water pumps can cause coolant leaks, leading to overheating and potential engine damage.

Cylinder scoring

Wear and tear over time can cause scoring in the cylinder walls, leading to reduced performance and increased oil consumption.

Timing chain issues

Worn timing chain guides or tensioners can lead to timing chain failure, which can cause severe engine damage.

Vacuum leaks

Faulty vacuum lines or components can cause air leaks, leading to poor engine performance and rough idling.

Mass air flow (maf) sensor failure

A failing MAF sensor can cause issues with air-fuel mixture, leading to poor fuel economy and performance.

PORSCHE Boxster 2014

The 2014 Porsche Boxster is a sleek convertible boasting a 2.7L, 6-cylinder engine that delivers 265 horsepower. Manufactured in Osnabrück, Germany, this stylish cabriolet offers a luxurious and thrilling driving experience. With its lightweight build and impressive performance, it’s a perfect blend of elegance and power.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Commonly caused by worn gaskets or seals, oil leaks can lead to low oil levels and potential engine damage if not addressed.

Ims bearing failure

The intermediate shaft (IMS) bearing has been a known issue in some Porsche models, leading to catastrophic engine failure if it fails.

Coolant leaks

Cracked coolant reservoirs or failing water pumps can cause coolant leaks, leading to overheating and potential engine damage.

Cylinder scoring

Wear and tear over time can cause scoring in the cylinder walls, leading to reduced performance and increased oil consumption.

Timing chain issues

Worn timing chain guides or tensioners can lead to timing chain failure, which can cause severe engine damage.

Vacuum leaks

Faulty vacuum lines or components can cause air leaks, leading to poor engine performance and rough idling.

Mass air flow (maf) sensor failure

A failing MAF sensor can cause issues with air-fuel mixture, leading to poor fuel economy and performance.

PORSCHE Boxster 2015

The 2015 PORSCHE Boxster is a stunning convertible/cabriolet powered by a 2.7L, 6-cylinder gasoline engine producing 265 hp. Manufactured by DR. ING. H.C.F. PORSCHE AG in Stuttgart-Zuffenhausen, Germany, this Type 981 model combines luxury and performance. It features a direct TPMS and has a GVWR ranging from 3,627 to 3,693 lbs. A true embodiment of Porsche's engineering excellence.

Spec:

Engine Brake (hp) From

265.00

Engine Number of Cylinders

Problems:

Oil leaks

Common in the Porsche Boxster, especially around the rear main seal and valve covers, leading to oil spots under the vehicle.

Ims bearing failure

The intermediate shaft (IMS) bearing can fail, causing significant engine damage if not addressed.

Coolant leaks

Issues with the coolant reservoir can lead to leaks and potential overheating.

Rms (rear main seal) failure

The rear main seal can degrade over time, causing oil leaks and potential clutch contamination.

Cylinder scoring

Premature wear on the cylinder walls can occur, leading to loss of compression and engine performance issues.

Timing chain tensioner failure

The tensioner can fail, leading to timing chain issues and potential engine damage.