Most Common Car Issues
Add more parameters
MOST COMMON PROBLEMS
JEEP Wrangler 2012
The 2012 Jeep Wrangler Sport is a robust 2-door SUV designed for adventure, powered by a Chrysler-manufactured 3.6L V6 engine delivering 283 horsepower. Built in Toledo, Ohio, this 4WD off-roader is a flexible fuel vehicle equipped with a hydraulic brake system and direct TPMS for added safety. Its active seat belts and front airbags ensure passenger protection, making it a capable and reliable choice for both on-road and off-road escapades.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sahara is a rugged SUV designed for adventure, featuring a 3.6L V6 engine with 283 horsepower and a 4WD drivetrain. Manufactured by FCA US LLC in Toledo, Ohio, this model comes equipped with hydraulic brakes and a direct TPMS for enhanced safety. Its 4-door configuration and active seat belts provide practicality and security, while the iconic Jeep styling promises a blend of off-road capability and on-road comfort.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2013
The 2013 Jeep Wrangler is a robust Sport Utility Vehicle (SUV) designed for off-road adventures, featuring a 3.6-liter V6 engine producing 283 horsepower. With a 4WD drivetrain, it offers excellent traction and stability across various terrains. Built in Toledo, Ohio, by FCA US LLC, this model provides essential safety features like front and side airbags, and a direct Tire Pressure Monitoring System (TPMS). The Wrangler's iconic design and capability make it a popular choice among adventure enthusiasts.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2012
The 2012 Jeep Wrangler Sport, manufactured by FCA US LLC in Toledo, Ohio, is a versatile 2-door SUV equipped with a 3.6L V6 engine producing 283 hp. This 4WD vehicle has a hydraulic brake system and supports flexible fuel. It includes essential safety features like front airbags and active seat belts. Ideal for off-road adventures, it boasts a gross vehicle weight rating of Class 1C (4,001 - 5,000 lb).
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2012
The 2012 Jeep Wrangler Rubicon is a robust SUV equipped with a 3.6L V6 engine producing 283 hp and featuring 4WD capabilities. Manufactured by FCA US LLC in Toledo, Ohio, this model offers versatile fuel options as a Flexible Fuel Vehicle. It includes crucial safety features like front and side airbags, active seat belts, and a direct TPMS. The Wrangler Rubicon is built for adventure with its durable design and high-performance specs.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2012
The 2012 JEEP Wrangler Sport is a robust SUV/MPV with a 3.6L V6 engine producing 283 hp. It features a 4WD drive type, hydraulic brakes, and flexible fuel capability. Built in Toledo, Ohio by FCA US LLC, this model includes modern safety features like front airbags and active seat belts. Ideal for both on-road and off-road adventures, it embodies the rugged spirit of the Wrangler series.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Rubicon is a rugged 2-door SUV with a powerful 3.6L V6 engine delivering 283 hp. Built by FCA US LLC in Toledo, Ohio, this 4WD vehicle is equipped with hydraulic brakes and a direct TPMS. It features essential safety elements like front airbags and active seat belts, making it a reliable choice for off-road enthusiasts.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2012
The 2012 JEEP Wrangler Sahara is a versatile SUV equipped with a 3.6L V6 engine, producing 283 hp. It's a 4WD vehicle with flexible fuel capability, manufactured by FCA US LLC in Toledo, Ohio. This model features active seat belts, front and side airbags, and a direct TPMS. The Wrangler Sahara is designed for both on-road comfort and off-road adventures.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sport is a rugged 2-door SUV powered by a 3.6L V6 engine delivering 283 hp. It features a 4WD system and a hydraulic brake system. Manufactured by FCA US LLC in Toledo, Ohio, this model includes front airbags and a manual seat belt system for safety. Ideal for off-road adventures, it runs on gasoline and falls within the Class 1C weight rating.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2012
The 2012 Jeep Wrangler Sahara is a versatile 4WD SUV equipped with a 3.6L V6 engine from Chrysler, delivering 283 hp. Manufactured by FCA US LLC in Toledo, Ohio, this vehicle offers flexible fuel options and active seat belts for safety. With a hydraulic brake system and direct TPMS, it’s designed for both rugged terrains and everyday driving.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sport is a robust SUV equipped with a 3.6L V6 engine generating 283 horsepower. Featuring a 4WD system, it offers excellent off-road capabilities. Manufactured by FCA US LLC in Toledo, Ohio, this vehicle also includes a direct tire pressure monitoring system and manual seat belts for enhanced safety.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sahara is a robust 2-door SUV equipped with a 3.6L V6 engine delivering 283 hp. It features 4WD for off-road capabilities and includes safety measures like front and side airbags for the driver and passenger. Manufactured by FCA US LLC in Toledo, Ohio, this model ensures a blend of power and reliability with a hydraulic brake system and direct TPMS. Ideal for adventurous rides, it offers a manual seat belt system and a left-hand drive configuration.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2012
The 2012 Jeep Wrangler Sport is a robust SUV designed for multipurpose use, featuring a 3.6L V6 engine that delivers 283 horsepower. With a 4WD drivetrain, flexible fuel capability, and hydraulic brakes, it's built for both on-road and off-road adventures. Manufactured by FCA US LLC in Toledo, Ohio, this model comes equipped with essential safety features like front and side airbags and a direct TPMS.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sport is a robust SUV powered by a 3.6L V6 engine producing 283 hp. It features a 4-wheel drive system, hydraulic brakes, and a gross vehicle weight rating of up to 6,000 lbs. Manufactured by FCA US LLC in Toledo, Ohio, this model ensures safety with front airbags and an active seat belt system.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sport is a rugged 2-door SUV with a 3.6L V6 engine producing 283 horsepower. Equipped with a hydraulic brake system and 4WD, it's built for off-road adventures. Manufactured by FCA US LLC in Toledo, Ohio, it features manual seat belts and a direct TPMS. This gasoline-powered vehicle offers a robust driving experience while ensuring safety with front airbags and active seat belts.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Rubicon is a robust 2-door SUV equipped with a 3.6L V6 engine delivering 283 horsepower. It features a 4WD system and hydraulic brakes, making it ideal for off-road adventures. Built in Toledo, Ohio by FCA US LLC, this model prioritizes safety with active seat belts and front airbags. Perfect for those seeking a rugged, reliable vehicle with a manual seat belt system and direct TPMS.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2012
The 2012 Jeep Wrangler Rubicon is a robust SUV equipped with a 3.6L V6 engine producing 283 hp. Designed for off-road adventures, it features a 4WD system and a flexible fuel capability. This model is manufactured by FCA US LLC in Toledo, Ohio. It also includes essential safety features like front airbags and active seat belts.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sahara is a robust 4WD SUV powered by a 3.6L V6 engine producing 283 hp. Manufactured by FCA US LLC in Toledo, Ohio, this model includes hydraulic brakes, direct TPMS, and active seat belts. It offers a safe and reliable ride with front airbags for both the driver and passenger. Ideal for both on-road and off-road adventures, it combines power with versatility.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sport is a robust 2-door SUV equipped with a 3.6L V6 engine, delivering 283 horsepower. It features a 4WD system, making it ideal for off-road adventures. Manufactured in Toledo, Ohio, by FCA US LLC, this model includes essential safety features like front airbags and active seat belts.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2012
The 2012 Jeep Wrangler Sport is a robust 2-door SUV/MPV powered by a 3.6L V6 engine producing 283 hp. It features a 4WD system, flexible fuel capability, and is manufactured by FCA US LLC in Toledo, Ohio. The Wrangler is equipped with active seat belts, front airbags, and a direct TPMS. This model is part of the JK series and is designed for off-road adventures.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Sahara is a robust 4WD SUV powered by a 3.6L V6 engine delivering 283 hp. Manufactured by FCA US LLC in Toledo, Ohio, this model features a hydraulic brake system, manual seat belts, and active safety systems. Designed for versatility, it offers a strong off-road capability with a gross vehicle weight rating of up to 6,000 lbs.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Rubicon is a versatile 4WD SUV powered by a 3.6L V6 engine producing 283 hp. Manufactured by FCA US LLC in Toledo, Ohio, this model features hydraulic brakes, active seat belts, and first-row airbags for both driver and passenger. It comes equipped with a direct TPMS and manual seat belts, emphasizing safety and performance. Perfect for off-road adventures and daily commutes alike.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Rubicon is a rugged 2-door SUV designed for off-road adventures, featuring a 3.6L V6 engine with 283 hp. Its 4WD system and hydraulic brakes ensure superior handling on tough terrains. Built in Toledo, Ohio by FCA US LLC, it comes equipped with essential safety features like 1st row airbags and active seat belts. This model offers the ultimate blend of performance and durability.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.
JEEP Wrangler 2012
The 2012 JEEP Wrangler Sport is a robust 2-door SUV equipped with a 3.6L V6 engine delivering 283 hp. It features a 4WD drivetrain, hydraulic brakes, and is capable of running on flexible fuel. Manufactured by FCA US LLC in Toledo, Ohio, this model includes essential safety features like front airbags and active seat belts. Ideal for off-road adventures, it combines rugged performance with versatile functionality.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Manufacturer
Chrysler
Engine Number of Cylinders
6
Other Engine Info
Gas/Flex Fuel(50-St.)
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, resulting in reduced braking efficiency.
Spongy brake pedal
Air trapped in the hydraulic brake lines can cause a spongy or soft brake pedal, affecting braking performance.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking.
Overheating brakes
Brake components can overheat, especially during heavy use or extreme conditions, leading to brake fade or failure.
Brake rotor issues
Warped or damaged brake rotors can cause vibrations or reduced braking efficiency.
Brake master cylinder failure
A failing master cylinder can lead to a loss of hydraulic pressure, resulting in brake failure.
Abs malfunction
The Anti-lock Braking System (ABS) can malfunction, indicated by warning lights and reduced braking control during emergency stops.
Corroded brake lines
Corrosion in brake lines can lead to leaks and reduced braking performance.
Caliper sticking
Brake calipers can become stuck, causing uneven braking or dragging brakes.
Engine oil leaks
Engine oil leaks can occur from gaskets, seals, or other components, leading to potential engine damage if not addressed.
Spark plug issues
Worn or faulty spark plugs can cause engine misfires, reduced performance, and poor fuel efficiency.
Fuel injector problems
Dirty or clogged fuel injectors can lead to poor engine performance, rough idling, and reduced fuel economy.
Cooling system failures
Issues with the radiator, water pump, or thermostat can lead to engine overheating.
Timing chain/belt problems
A worn or failing timing chain/belt can cause engine performance issues or catastrophic engine damage if it breaks.
Transmission issues
Problems with the automatic transmission, such as slipping or hard shifting, can affect vehicle performance.
Exhaust manifold cracks
Cracked exhaust manifolds can cause exhaust leaks, reducing engine performance and increasing noise.
Oxygen sensor failures
Faulty oxygen sensors can lead to incorrect fuel mixture, poor performance, and increased emissions.
Throttle body issues
Problems with the throttle body can cause poor acceleration and rough idling.
Fuel pump failures
A failing fuel pump can cause engine stalling, poor performance, and no-start conditions.
JEEP Wrangler 2013
The 2013 Jeep Wrangler Rubicon is a robust SUV with a 3.6L V6 engine delivering 283 hp. It features 4WD, hydraulic brakes, and active seat belts for safety. Built in Toledo, Ohio, this model is well-suited for both rugged off-road adventures and daily commutes.
Spec:
Brake System Type
Hydraulic
Engine Brake (hp) From
283
Engine Number of Cylinders
6
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, calipers, or master cylinder, leading to decreased braking efficiency.
Brake fade
Prolonged use of the brakes, especially under heavy load or steep descents, can cause overheating and reduced braking performance.
Warped brake rotors
Excessive heat or improper torquing of wheel lug nuts can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain optimal braking performance.
Master cylinder failure
The master cylinder can wear out or fail, resulting in a loss of hydraulic pressure and decreased braking ability.
Abs sensor issues
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing the ABS to malfunction or not engage properly.
Brake caliper sticking
Calipers can become stuck due to corrosion or debris, leading to uneven braking and potential damage to the brake system.
Brake line rust/corrosion
Brake lines can rust or corrode, especially in regions with harsh winters or where road salt is used, leading to potential leaks and brake failure.