Problems with the DBS system can include sensor malfunctions, software glitches, or mechanical failures, leading to delayed or inadequate braking support during emergency situations.

The B4204TS(HP) engine is turbocharged, and common issues can include turbo lag, oil leaks, or turbo failure, which can affect performance and fuel efficiency.

Four-cylinder turbocharged engines can be prone to overheating if there are cooling system issues like a faulty thermostat, radiator problems, or coolant leaks.

Issues with the timing chain can lead to engine misfires, poor performance, and potentially severe engine damage if not addressed promptly.

Malfunctions in the fuel injectors can cause poor fuel economy, rough idling, and engine misfires.

Turbocharged engines can experience carbon buildup on intake valves, leading to reduced performance and fuel efficiency.

Problems with the ETC can cause erratic idling, stalling, and reduced engine performance.

The vehicle's AWD system and transmission can experience issues such as gear slipping, delayed shifting, or transmission fluid leaks, affecting drivability.

Modern engines rely on various sensors (e.g., oxygen sensors, mass airflow sensors) that can fail, leading to poor engine performance and increased emissions.

The vehicle may require frequent software updates to address various engine and system performance issues.

Given the AWD system, there can be wear and tear on the suspension components, leading to a rough ride or handling problems.

Regular use of the DBS and other braking systems can lead to accelerated brake wear, necessitating frequent brake pad and rotor replacements.

A common problem with turbocharged engines like the B4204TS is engine misfire, often due to spark plug issues, ignition coil failures, or fuel injector problems.

Turbocharged engines, such as the B4204TS, may experience turbocharger issues including boost leaks, worn bearings, or failed turbines, leading to a loss of power.

Engines like the B4204TS can sometimes consume oil at a higher rate, which might be due to worn piston rings or valve seals.

Issues with the cooling system, such as radiator, thermostat, or water pump failures, can lead to overheating in the B4204TS engine.

The B4204TS engine might experience timing chain wear over time, leading to poor engine performance or even engine failure if not addressed.

Problems with the fuel pump or fuel filter can lead to inadequate fuel delivery, which impacts the performance of the B4204TS engine.

Direct-injection engines like the B4204TS can suffer from carbon buildup on the intake valves, leading to rough idling and performance issues.

The DBS system may fail to provide adequate braking assistance during emergency stops, reducing overall braking performance.

The B4204TS(HP) turbocharged engine may experience turbo lag, reduced boost pressure, or turbo failure, affecting power delivery and engine performance.

The 4-cylinder engine may misfire due to issues such as faulty spark plugs, ignition coils, or fuel injectors, leading to rough idling and decreased fuel efficiency.

The engine may develop oil leaks from gaskets, seals, or the turbocharger, potentially causing low oil levels and engine damage.

The engine may overheat due to issues with the radiator, water pump, or thermostat, leading to potential engine damage if not addressed.

A worn or damaged timing chain or belt can lead to poor engine performance, misfires, or engine failure if it breaks.

Issues with the fuel pump, fuel filter, or injectors may result in poor fuel delivery, leading to engine stalling or reduced power.

Malfunctions in the ETC system can lead to poor throttle response, hesitation, or unintended acceleration.

A faulty PCV valve can cause increased oil consumption, oil leaks, or rough engine idle.

Worn or broken engine mounts can lead to excessive engine vibration and noise, affecting overall driving comfort.

The DBS system may fail to provide adequate braking assistance during emergency stops, reducing overall braking performance.

The B4204TS(HP) turbocharged engine may experience turbo lag, reduced boost pressure, or turbo failure, affecting power delivery and engine performance.

The 4-cylinder engine may misfire due to issues such as faulty spark plugs, ignition coils, or fuel injectors, leading to rough idling and decreased fuel efficiency.

The engine may develop oil leaks from gaskets, seals, or the turbocharger, potentially causing low oil levels and engine damage.

The engine may overheat due to issues with the radiator, water pump, or thermostat, leading to potential engine damage if not addressed.

A worn or damaged timing chain or belt can lead to poor engine performance, misfires, or engine failure if it breaks.

Issues with the fuel pump, fuel filter, or injectors may result in poor fuel delivery, leading to engine stalling or reduced power.

Malfunctions in the ETC system can lead to poor throttle response, hesitation, or unintended acceleration.

A faulty PCV valve can cause increased oil consumption, oil leaks, or rough engine idle.

Worn or broken engine mounts can lead to excessive engine vibration and noise, affecting overall driving comfort.

The DBS system may fail to provide adequate braking assistance during emergency stops, reducing overall braking performance.

The B4204TS(HP) turbocharged engine may experience turbo lag, reduced boost pressure, or turbo failure, affecting power delivery and engine performance.

The 4-cylinder engine may misfire due to issues such as faulty spark plugs, ignition coils, or fuel injectors, leading to rough idling and decreased fuel efficiency.

The engine may develop oil leaks from gaskets, seals, or the turbocharger, potentially causing low oil levels and engine damage.

The engine may overheat due to issues with the radiator, water pump, or thermostat, leading to potential engine damage if not addressed.

A worn or damaged timing chain or belt can lead to poor engine performance, misfires, or engine failure if it breaks.

Issues with the fuel pump, fuel filter, or injectors may result in poor fuel delivery, leading to engine stalling or reduced power.

Malfunctions in the ETC system can lead to poor throttle response, hesitation, or unintended acceleration.

A faulty PCV valve can cause increased oil consumption, oil leaks, or rough engine idle.

Worn or broken engine mounts can lead to excessive engine vibration and noise, affecting overall driving comfort.

The DBS system may fail to provide adequate braking assistance during emergency stops, reducing overall braking performance.

The B4204TS(HP) turbocharged engine may experience turbo lag, reduced boost pressure, or turbo failure, affecting power delivery and engine performance.

The 4-cylinder engine may misfire due to issues such as faulty spark plugs, ignition coils, or fuel injectors, leading to rough idling and decreased fuel efficiency.

The engine may develop oil leaks from gaskets, seals, or the turbocharger, potentially causing low oil levels and engine damage.

The engine may overheat due to issues with the radiator, water pump, or thermostat, leading to potential engine damage if not addressed.

A worn or damaged timing chain or belt can lead to poor engine performance, misfires, or engine failure if it breaks.

Issues with the fuel pump, fuel filter, or injectors may result in poor fuel delivery, leading to engine stalling or reduced power.

Malfunctions in the ETC system can lead to poor throttle response, hesitation, or unintended acceleration.

A faulty PCV valve can cause increased oil consumption, oil leaks, or rough engine idle.

Worn or broken engine mounts can lead to excessive engine vibration and noise, affecting overall driving comfort.

The DBS system may fail to provide adequate braking assistance during emergency stops, reducing overall braking performance.

The B4204TS(HP) turbocharged engine may experience turbo lag, reduced boost pressure, or turbo failure, affecting power delivery and engine performance.

The 4-cylinder engine may misfire due to issues such as faulty spark plugs, ignition coils, or fuel injectors, leading to rough idling and decreased fuel efficiency.

The engine may develop oil leaks from gaskets, seals, or the turbocharger, potentially causing low oil levels and engine damage.

The engine may overheat due to issues with the radiator, water pump, or thermostat, leading to potential engine damage if not addressed.

A worn or damaged timing chain or belt can lead to poor engine performance, misfires, or engine failure if it breaks.

Issues with the fuel pump, fuel filter, or injectors may result in poor fuel delivery, leading to engine stalling or reduced power.

Malfunctions in the ETC system can lead to poor throttle response, hesitation, or unintended acceleration.

A faulty PCV valve can cause increased oil consumption, oil leaks, or rough engine idle.

Worn or broken engine mounts can lead to excessive engine vibration and noise, affecting overall driving comfort.