Most Common Car Issues

Selected parameters

Add more parameters

MOST COMMON PROBLEMS

BMW M6 2007

The 2007 BMW M6 Coupe is a high-performance vehicle manufactured by BMW M GmbH in Dingolfing, Germany. It features a powerful 5.0-liter V10 engine producing over 500 horsepower, ensuring an exhilarating driving experience. The car includes safety features like dual-stage supplemental restraint systems and a direct tire pressure monitoring system. With its sleek two-door design and advanced engineering, the M6 embodies the luxury and performance synonymous with the BMW brand.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

BMW M6 engines, especially older models, are prone to developing oil leaks due to worn-out gaskets and seals.

Cooling system issues

The 2007 BMW M6 is known for having issues with its cooling system components, such as the water pump and thermostat, which can lead to overheating.

Vanos system failure

The variable valve timing system (VANOS) in BMWs can fail, leading to performance issues and rough idling.

Rod bearing wear

The high-performance S85 V10 engine in the M6 is susceptible to rod bearing wear, which can cause engine knocking and potential catastrophic failure if not addressed.

Electrical problems

The complex electronics in the BMW M6 can sometimes malfunction, leading to various engine-related issues such as misfires and starting problems.

Carbon buildup

The direct injection system in the M6 can lead to carbon buildup on the intake valves, which can affect engine performance and fuel efficiency.

BMW M5 2007

The 2007 BMW M5 is a high-performance sedan equipped with a 5.0-liter V10 engine delivering 500 horsepower. This luxury vehicle, manufactured by BMW M GmbH in Dingolfing, Germany, features advanced safety systems, including a dual-stage supplemental restraint system. It maintains a sleek design with four doors and is fueled by gasoline, catering to drivers who appreciate both power and elegance.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

The 2007 BMW M5, with its high-performance V10 engine, is prone to oil leaks, often due to worn gaskets or seals.

Rod bearing wear

The V10 engine in the 2007 M5 is known for premature rod bearing wear, which can lead to engine damage if not addressed.

Vanos system failure

The variable valve timing system (VANOS) in BMW engines can fail, leading to performance issues and potential engine damage.

Throttle actuator issues

The electronic throttle actuators can fail, causing the engine to go into limp mode or run poorly.

Cooling system problems

The cooling system, including the water pump and thermostat, can be prone to failure, leading to overheating issues.

Carbon buildup

The high-performance nature of the engine can lead to carbon buildup on intake valves, affecting performance and efficiency.

BMW M5 2006

The 2006 BMW M5 is a high-performance sedan featuring a 5.0-liter V10 engine producing 500 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, this model boasts a sleek design with four doors and advanced safety features like dual-stage supplemental restraint systems. It offers a comfortable ride with a wheelbase of 113.7 inches and is equipped with a direct tire pressure monitoring system. This vehicle represents the epitome of luxury and performance within the 5 Series lineup.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW models, like the 2006 M5, are prone to oil leaks, often from the valve cover gasket or oil pan gasket.

Vanos system issues

The Variable Nockenwellen Steuerung (VANOS) system, which adjusts the timing of the camshafts, can fail and cause poor engine performance and rough idling.

Rod bearing failure

The S85 engine in the 2006 M5 is known for rod bearing issues, which can lead to catastrophic engine failure if not addressed.

Throttle actuator failure

The throttle actuators in the 2006 M5 can fail, causing the car to go into limp mode and significantly reducing power.

Coolant leaks

Cooling system components such as the radiator, water pump, and hoses may develop leaks, leading to overheating issues.

Ignition coil failure

Ignition coils can fail, causing misfires and rough running conditions.

Smg transmission problems

The Sequential Manual Gearbox (SMG) can have issues with the hydraulic pump, clutch, or electronic components, leading to shifting problems.

Carbon build-up

Over time, carbon deposits can build up in the intake system, leading to reduced performance and fuel efficiency.

BMW M5 2006

The 2006 BMW M5 is a high-performance sedan from BMW M GMBH, equipped with a robust 5.0-liter V10 engine producing 500 horsepower. This four-door vehicle offers a sophisticated dual-stage supplemental restraint system and features direct tire pressure monitoring. Manufactured in Dingolfing, Germany, it is part of the 5-Series lineup, providing an exhilarating driving experience with classic BMW luxury and precision engineering.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW models, like the 2006 M5, are prone to oil leaks, often from the valve cover gasket or oil pan gasket.

Vanos system issues

The Variable Nockenwellen Steuerung (VANOS) system, which adjusts the timing of the camshafts, can fail and cause poor engine performance and rough idling.

Rod bearing failure

The S85 engine in the 2006 M5 is known for rod bearing issues, which can lead to catastrophic engine failure if not addressed.

Throttle actuator failure

The throttle actuators in the 2006 M5 can fail, causing the car to go into limp mode and significantly reducing power.

Coolant leaks

Cooling system components such as the radiator, water pump, and hoses may develop leaks, leading to overheating issues.

Ignition coil failure

Ignition coils can fail, causing misfires and rough running conditions.

Smg transmission problems

The Sequential Manual Gearbox (SMG) can have issues with the hydraulic pump, clutch, or electronic components, leading to shifting problems.

Carbon build-up

Over time, carbon deposits can build up in the intake system, leading to reduced performance and fuel efficiency.

BMW M5 2008

The 2008 BMW M5 is a high-performance sedan powered by a 5.0-liter V10 engine, delivering 500 horsepower. This vehicle is manufactured by BMW M GmbH in Dingolfing, Germany, and features a dual-stage supplemental restraint system for enhanced safety. With its four doors and manual seat belts, the M5 offers both luxury and power, making it a standout in the 5-Series lineup.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 2008 M5, are prone to oil leaks due to aging gaskets and seals.

Vanos system failure

The BMW M5's Variable Valve Timing (VANOS) system can fail, leading to poor engine performance and rough idling.

Rod bearing wear

The high-performance S85 engine in the M5 is known for rod bearing wear, which can lead to engine failure if not addressed.

Coolant leaks

Coolant leaks are common due to worn-out hoses or radiator issues, leading to potential overheating.

Thermostat failure

Thermostat issues can cause the engine to run too hot or too cold, affecting performance and longevity.

Spark plug and ignition coil problems

Misfires and rough running can often be traced back to failing spark plugs or ignition coils.

Smg transmission issues

The Sequential Manual Gearbox (SMG) can have reliability problems, including shifting issues and pump failures.

BMW M6 2008

The 2008 BMW M6 Convertible is a captivating blend of performance and luxury, with its powerful 5.0-liter V10 engine producing over 500 horsepower. This 2-door cabriolet, manufactured by BMW M GmbH in Dingolfing, Germany, offers a thrilling open-top driving experience. Equipped with advanced safety features like dual-stage airbags and a direct TPMS, it ensures both safety and performance. The M6's design and engineering make it a standout in the 6-Series lineup.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks can occur due to worn-out gaskets or seals in a high-performance engine like the BMW M6's V10.

Rod bearing failure

The BMW M6's V10 engine is known for rod bearing issues, which can lead to severe engine damage if not addressed.

Vanos system issues

The Variable Valve Timing system (VANOS) can fail, causing poor engine performance and rough idling.

Throttle actuator failure

Throttle actuators may fail over time, leading to reduced engine power and possible limp mode.

Cooling system problems

The cooling system may develop leaks or fail, leading to overheating, which is critical for high-performance engines.

Electrical issues

The complex electronics in the BMW M6 can develop faults, leading to various engine and performance issues.

Carbon build-up

Carbon deposits can accumulate in the intake valves and ports, affecting engine performance and fuel efficiency.

BMW M6 2008

The 2008 BMW M6 Convertible is a high-performance vehicle that combines elegance and power. Equipped with a 5.0-liter V10 engine delivering 500 hp, this two-door cabriolet offers an exhilarating open-air driving experience. Manufactured in Dingolfing, Germany, it features advanced safety systems, including dual-stage airbags and a direct tire pressure monitoring system. This stylish member of the 6-Series is a testament to BMW M GmbH's commitment to luxury and performance.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks can occur due to worn-out gaskets or seals in a high-performance engine like the BMW M6's V10.

Rod bearing failure

The BMW M6's V10 engine is known for rod bearing issues, which can lead to severe engine damage if not addressed.

Vanos system issues

The Variable Valve Timing system (VANOS) can fail, causing poor engine performance and rough idling.

Throttle actuator failure

Throttle actuators may fail over time, leading to reduced engine power and possible limp mode.

Cooling system problems

The cooling system may develop leaks or fail, leading to overheating, which is critical for high-performance engines.

Electrical issues

The complex electronics in the BMW M6 can develop faults, leading to various engine and performance issues.

Carbon build-up

Carbon deposits can accumulate in the intake valves and ports, affecting engine performance and fuel efficiency.

BMW M6 2010

The 2010 BMW M6 Convertible is a high-performance vehicle featuring a 5.0L V10 engine producing over 500 horsepower. With a 2-door design and advanced safety systems, this cabriolet offers a thrilling driving experience. Manufactured by BMW M GmbH in Dingolfing, Germany, it epitomizes luxury and engineering excellence.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, particularly older models like the 2010 M6, are known for oil leaks. This can be due to worn gaskets, seals, or valve cover gaskets.

Vanos solenoid failure

The Variable Nockenwellen Steuerung (VANOS) system in BMW engines can fail, leading to poor performance and engine noise.

Rod bearing wear

The high-performance V10 engine in the BMW M6 is prone to rod bearing wear, which can lead to costly engine damage if not addressed.

Cooling system issues

BMWs, including the M6, often face cooling system problems such as failing water pumps, radiators, and expansion tanks.

Carbon buildup

Direct injection engines in BMWs, including the M6, can suffer from carbon buildup on the intake valves, leading to rough idling and reduced performance.

Throttle actuator failure

The electronic throttle actuators in the BMW M6 can fail, causing reduced power and "limp mode" operation.

High oil consumption

The V10 engine in the BMW M6 is known for consuming more oil than average, which requires frequent monitoring and top-ups.

Timing chain issues

Over time, the timing chain and its components can wear out, leading to potential engine damage if not replaced.

Fuel injector problems

Fuel injectors in the BMW M6 can become clogged or fail, causing misfires and poor engine performance.

BMW M5 2006

The 2006 BMW M5 is a high-performance sedan powered by a 5.0-liter V10 engine delivering 500 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, this luxurious 4-door car features advanced dual-stage airbags and a direct TPMS. Its substantial build offers a gross vehicle weight rating of up to 6,000 lbs. With its sleek dimensions and robust engine, the M5 combines elegance with exhilarating performance.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW models, like the 2006 M5, are prone to oil leaks, often from the valve cover gasket or oil pan gasket.

Vanos system issues

The Variable Nockenwellen Steuerung (VANOS) system, which adjusts the timing of the camshafts, can fail and cause poor engine performance and rough idling.

Rod bearing failure

The S85 engine in the 2006 M5 is known for rod bearing issues, which can lead to catastrophic engine failure if not addressed.

Throttle actuator failure

The throttle actuators in the 2006 M5 can fail, causing the car to go into limp mode and significantly reducing power.

Coolant leaks

Cooling system components such as the radiator, water pump, and hoses may develop leaks, leading to overheating issues.

Ignition coil failure

Ignition coils can fail, causing misfires and rough running conditions.

Smg transmission problems

The Sequential Manual Gearbox (SMG) can have issues with the hydraulic pump, clutch, or electronic components, leading to shifting problems.

Carbon build-up

Over time, carbon deposits can build up in the intake system, leading to reduced performance and fuel efficiency.

BMW M6 2007

The 2007 BMW M6 Convertible is a powerful sports car featuring a 5.0L V10 engine that delivers over 500 horsepower. With its sleek two-door design, this cabriolet offers an exhilarating driving experience, enhanced by advanced safety features such as dual-stage airbags and a direct TPMS. Made by BMW M GmbH in Germany, it combines performance with luxury in the iconic 6-Series lineup.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

BMW M6 engines, especially older models, are prone to developing oil leaks due to worn-out gaskets and seals.

Cooling system issues

The 2007 BMW M6 is known for having issues with its cooling system components, such as the water pump and thermostat, which can lead to overheating.

Vanos system failure

The variable valve timing system (VANOS) in BMWs can fail, leading to performance issues and rough idling.

Rod bearing wear

The high-performance S85 V10 engine in the M6 is susceptible to rod bearing wear, which can cause engine knocking and potential catastrophic failure if not addressed.

Electrical problems

The complex electronics in the BMW M6 can sometimes malfunction, leading to various engine-related issues such as misfires and starting problems.

Carbon buildup

The direct injection system in the M6 can lead to carbon buildup on the intake valves, which can affect engine performance and fuel efficiency.

BMW M5 2008

The 2008 BMW M5 is a high-performance sedan powered by a 5.0L V10 engine delivering 500 horsepower. It features a dual-stage supplemental restraint system and direct TPMS for enhanced safety. Built in Dingolfing, Germany, this 4-door, 5-Series model offers luxury and power in a refined package. Ideal for those seeking a blend of performance and comfort in a passenger car.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 2008 M5, are prone to oil leaks due to aging gaskets and seals.

Vanos system failure

The BMW M5's Variable Valve Timing (VANOS) system can fail, leading to poor engine performance and rough idling.

Rod bearing wear

The high-performance S85 engine in the M5 is known for rod bearing wear, which can lead to engine failure if not addressed.

Coolant leaks

Coolant leaks are common due to worn-out hoses or radiator issues, leading to potential overheating.

Thermostat failure

Thermostat issues can cause the engine to run too hot or too cold, affecting performance and longevity.

Spark plug and ignition coil problems

Misfires and rough running can often be traced back to failing spark plugs or ignition coils.

Smg transmission issues

The Sequential Manual Gearbox (SMG) can have reliability problems, including shifting issues and pump failures.

BMW M6 2008

The 2008 BMW M6 Convertible offers a thrilling ride with its 5.0L V10 engine delivering over 500 horsepower. This 2-door cabriolet is equipped with advanced safety features, including dual-stage SRS airbags and a direct TPMS. Built in Dingolfing, Germany, it exemplifies BMW M GMBH's commitment to performance and luxury.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks can occur due to worn-out gaskets or seals in a high-performance engine like the BMW M6's V10.

Rod bearing failure

The BMW M6's V10 engine is known for rod bearing issues, which can lead to severe engine damage if not addressed.

Vanos system issues

The Variable Valve Timing system (VANOS) can fail, causing poor engine performance and rough idling.

Throttle actuator failure

Throttle actuators may fail over time, leading to reduced engine power and possible limp mode.

Cooling system problems

The cooling system may develop leaks or fail, leading to overheating, which is critical for high-performance engines.

Electrical issues

The complex electronics in the BMW M6 can develop faults, leading to various engine and performance issues.

Carbon build-up

Carbon deposits can accumulate in the intake valves and ports, affecting engine performance and fuel efficiency.

BMW M5 2008

The 2008 BMW M5 is a high-performance sedan boasting a 5.0L V10 engine with 500 horsepower. Manufactured in Dingolfing, Germany by BMW M GmbH, it features advanced dual-stage supplemental restraint systems and a direct TPMS. This four-door saloon blends luxury and power, making it a standout in the 5-Series lineup.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 2008 M5, are prone to oil leaks due to aging gaskets and seals.

Vanos system failure

The BMW M5's Variable Valve Timing (VANOS) system can fail, leading to poor engine performance and rough idling.

Rod bearing wear

The high-performance S85 engine in the M5 is known for rod bearing wear, which can lead to engine failure if not addressed.

Coolant leaks

Coolant leaks are common due to worn-out hoses or radiator issues, leading to potential overheating.

Thermostat failure

Thermostat issues can cause the engine to run too hot or too cold, affecting performance and longevity.

Spark plug and ignition coil problems

Misfires and rough running can often be traced back to failing spark plugs or ignition coils.

Smg transmission issues

The Sequential Manual Gearbox (SMG) can have reliability problems, including shifting issues and pump failures.

BMW M5 2008

The 2008 BMW M5 is a high-performance sedan boasting a powerful 5.0L V10 engine producing over 500 horsepower. Built in Dingolfing, Germany, this 4-door luxury vehicle features advanced safety systems including dual-stage SRS airbags and a direct TPMS. Ideal for those seeking a blend of performance and sophistication, the M5 is part of BMW's esteemed 5-Series.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 2008 M5, are prone to oil leaks due to aging gaskets and seals.

Vanos system failure

The BMW M5's Variable Valve Timing (VANOS) system can fail, leading to poor engine performance and rough idling.

Rod bearing wear

The high-performance S85 engine in the M5 is known for rod bearing wear, which can lead to engine failure if not addressed.

Coolant leaks

Coolant leaks are common due to worn-out hoses or radiator issues, leading to potential overheating.

Thermostat failure

Thermostat issues can cause the engine to run too hot or too cold, affecting performance and longevity.

Spark plug and ignition coil problems

Misfires and rough running can often be traced back to failing spark plugs or ignition coils.

Smg transmission issues

The Sequential Manual Gearbox (SMG) can have reliability problems, including shifting issues and pump failures.

BMW M5 2008

The 2008 BMW M5 is a high-performance sedan equipped with a powerful 5.0L V10 engine, delivering an impressive 500 hp. Manufactured by BMW M GmbH in Dingolfing, Germany, this model features dual-stage SRS airbags and a manual seat belt system. The M5 belongs to the 5-Series and includes a direct Tire Pressure Monitoring System (TPMS) for added safety.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 2008 M5, are prone to oil leaks due to aging gaskets and seals.

Vanos system failure

The BMW M5's Variable Valve Timing (VANOS) system can fail, leading to poor engine performance and rough idling.

Rod bearing wear

The high-performance S85 engine in the M5 is known for rod bearing wear, which can lead to engine failure if not addressed.

Coolant leaks

Coolant leaks are common due to worn-out hoses or radiator issues, leading to potential overheating.

Thermostat failure

Thermostat issues can cause the engine to run too hot or too cold, affecting performance and longevity.

Spark plug and ignition coil problems

Misfires and rough running can often be traced back to failing spark plugs or ignition coils.

Smg transmission issues

The Sequential Manual Gearbox (SMG) can have reliability problems, including shifting issues and pump failures.

BMW M5 2008

The 2008 BMW M5 is a high-performance sedan powered by a robust 5.0-liter V10 engine producing over 500 horsepower. Manufactured in Dingolfing, Germany by BMW M GmbH, this model features advanced dual-stage SRS airbags and a direct TPMS. With its luxurious build and impressive power, the M5 stands out in the 5-Series lineup.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 2008 M5, are prone to oil leaks due to aging gaskets and seals.

Vanos system failure

The BMW M5's Variable Valve Timing (VANOS) system can fail, leading to poor engine performance and rough idling.

Rod bearing wear

The high-performance S85 engine in the M5 is known for rod bearing wear, which can lead to engine failure if not addressed.

Coolant leaks

Coolant leaks are common due to worn-out hoses or radiator issues, leading to potential overheating.

Thermostat failure

Thermostat issues can cause the engine to run too hot or too cold, affecting performance and longevity.

Spark plug and ignition coil problems

Misfires and rough running can often be traced back to failing spark plugs or ignition coils.

Smg transmission issues

The Sequential Manual Gearbox (SMG) can have reliability problems, including shifting issues and pump failures.

BMW M5 2008

The 2008 BMW M5 is a high-performance sedan featuring a powerful 5.0L V10 engine producing over 500 horsepower. Manufactured in Dingolfing, Germany, this luxurious vehicle is equipped with advanced safety features, including dual-stage SRS airbags and direct TPMS. With a sleek design and exceptional engineering, the M5 offers a thrilling driving experience.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 2008 M5, are prone to oil leaks due to aging gaskets and seals.

Vanos system failure

The BMW M5's Variable Valve Timing (VANOS) system can fail, leading to poor engine performance and rough idling.

Rod bearing wear

The high-performance S85 engine in the M5 is known for rod bearing wear, which can lead to engine failure if not addressed.

Coolant leaks

Coolant leaks are common due to worn-out hoses or radiator issues, leading to potential overheating.

Thermostat failure

Thermostat issues can cause the engine to run too hot or too cold, affecting performance and longevity.

Spark plug and ignition coil problems

Misfires and rough running can often be traced back to failing spark plugs or ignition coils.

Smg transmission issues

The Sequential Manual Gearbox (SMG) can have reliability problems, including shifting issues and pump failures.

BMW M5 2008

The 2008 BMW M5 is a high-performance sedan with a powerful 5.0-liter V10 engine producing over 500 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, it features advanced safety systems, including dual-stage airbags and a direct TPMS. With its luxurious design and exceptional engineering, the M5 offers a thrilling driving experience.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW engines, including the 2008 M5, are prone to oil leaks due to aging gaskets and seals.

Vanos system failure

The BMW M5's Variable Valve Timing (VANOS) system can fail, leading to poor engine performance and rough idling.

Rod bearing wear

The high-performance S85 engine in the M5 is known for rod bearing wear, which can lead to engine failure if not addressed.

Coolant leaks

Coolant leaks are common due to worn-out hoses or radiator issues, leading to potential overheating.

Thermostat failure

Thermostat issues can cause the engine to run too hot or too cold, affecting performance and longevity.

Spark plug and ignition coil problems

Misfires and rough running can often be traced back to failing spark plugs or ignition coils.

Smg transmission issues

The Sequential Manual Gearbox (SMG) can have reliability problems, including shifting issues and pump failures.

BMW M6 2008

The 2008 BMW M6 Convertible boasts a powerful 5.0L V10 engine producing over 500 hp. With its elegant design and two-door configuration, this high-performance vehicle from BMW M GmbH offers an exhilarating driving experience. Safety features include dual-stage airbags and a direct TPMS. Built in Dingolfing, Germany, it epitomizes luxury and engineering excellence.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks can occur due to worn-out gaskets or seals in a high-performance engine like the BMW M6's V10.

Rod bearing failure

The BMW M6's V10 engine is known for rod bearing issues, which can lead to severe engine damage if not addressed.

Vanos system issues

The Variable Valve Timing system (VANOS) can fail, causing poor engine performance and rough idling.

Throttle actuator failure

Throttle actuators may fail over time, leading to reduced engine power and possible limp mode.

Cooling system problems

The cooling system may develop leaks or fail, leading to overheating, which is critical for high-performance engines.

Electrical issues

The complex electronics in the BMW M6 can develop faults, leading to various engine and performance issues.

Carbon build-up

Carbon deposits can accumulate in the intake valves and ports, affecting engine performance and fuel efficiency.

BMW M6 2006

The 2006 BMW M6 is a high-performance coupe featuring a 5.0L V10 engine that produces 500 horsepower. With its sleek two-door design, it offers advanced safety features like dual-stage supplemental restraint systems and front airbags for both driver and passenger. Manufactured in Dingolfing, Germany, this car belongs to the prestigious 6 Series and comes equipped with a direct Tire Pressure Monitoring System (TPMS).

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

BMW M6 engines from 2006 are known to develop oil leaks, particularly from valve cover gaskets and oil pan gaskets.

Rod bearing wear

The S85 engine in the 2006 BMW M6 can experience premature rod bearing wear, which can lead to engine failure if not addressed.

Throttle actuator failure

The throttle actuators in this model can fail, leading to reduced engine performance and the potential for the car to enter limp mode.

Vanos issues

The Variable Valve Timing (VANOS) system can develop problems, leading to rough idling, poor performance, and engine warning lights.

High fuel consumption

The 10-cylinder engine is known for its high fuel consumption, which can be a concern for some owners.

Electrical problems

Various electrical issues can arise, including problems with the engine control unit (ECU) and sensors, which can affect engine performance.

BMW M6 2007

The 2007 BMW M6 Convertible is a high-performance vehicle powered by a 5.0L V10 engine producing over 500 hp. This two-door luxury cabriolet comes equipped with advanced safety features, including dual-stage airbags and a direct TPMS. Manufactured in Dingolfing, Germany, it belongs to BMW's prestigious 6 Series.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

BMW M6 engines, especially older models, are prone to developing oil leaks due to worn-out gaskets and seals.

Cooling system issues

The 2007 BMW M6 is known for having issues with its cooling system components, such as the water pump and thermostat, which can lead to overheating.

Vanos system failure

The variable valve timing system (VANOS) in BMWs can fail, leading to performance issues and rough idling.

Rod bearing wear

The high-performance S85 V10 engine in the M6 is susceptible to rod bearing wear, which can cause engine knocking and potential catastrophic failure if not addressed.

Electrical problems

The complex electronics in the BMW M6 can sometimes malfunction, leading to various engine-related issues such as misfires and starting problems.

Carbon buildup

The direct injection system in the M6 can lead to carbon buildup on the intake valves, which can affect engine performance and fuel efficiency.

BMW M5 2006

The 2006 BMW M5 is a high-performance sedan that houses a powerful 5.0L V10 engine, delivering an impressive 500 horsepower. Manufactured by BMW M GMBH in Dingolfing, Germany, this vehicle features advanced safety systems including dual-stage airbags and a direct Tire Pressure Monitoring System. With a sleek body measuring 191.5 inches in length and a gross vehicle weight rating of up to 6,000 lbs, the M5 combines luxury, safety, and exceptional performance.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW models, like the 2006 M5, are prone to oil leaks, often from the valve cover gasket or oil pan gasket.

Vanos system issues

The Variable Nockenwellen Steuerung (VANOS) system, which adjusts the timing of the camshafts, can fail and cause poor engine performance and rough idling.

Rod bearing failure

The S85 engine in the 2006 M5 is known for rod bearing issues, which can lead to catastrophic engine failure if not addressed.

Throttle actuator failure

The throttle actuators in the 2006 M5 can fail, causing the car to go into limp mode and significantly reducing power.

Coolant leaks

Cooling system components such as the radiator, water pump, and hoses may develop leaks, leading to overheating issues.

Ignition coil failure

Ignition coils can fail, causing misfires and rough running conditions.

Smg transmission problems

The Sequential Manual Gearbox (SMG) can have issues with the hydraulic pump, clutch, or electronic components, leading to shifting problems.

Carbon build-up

Over time, carbon deposits can build up in the intake system, leading to reduced performance and fuel efficiency.

BMW M5 2006

The 2006 BMW M5 is a high-performance sedan powered by a 5.0L V10 engine, delivering 500 horsepower. It features a 4-door design, advanced dual-stage airbags, and a direct TPMS. Manufactured in Dingolfing, Germany by BMW M GmbH, this vehicle is part of the 5-Series and boasts a robust build with a gross vehicle weight rating of up to 6,000 lbs.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

Older BMW models, like the 2006 M5, are prone to oil leaks, often from the valve cover gasket or oil pan gasket.

Vanos system issues

The Variable Nockenwellen Steuerung (VANOS) system, which adjusts the timing of the camshafts, can fail and cause poor engine performance and rough idling.

Rod bearing failure

The S85 engine in the 2006 M5 is known for rod bearing issues, which can lead to catastrophic engine failure if not addressed.

Throttle actuator failure

The throttle actuators in the 2006 M5 can fail, causing the car to go into limp mode and significantly reducing power.

Coolant leaks

Cooling system components such as the radiator, water pump, and hoses may develop leaks, leading to overheating issues.

Ignition coil failure

Ignition coils can fail, causing misfires and rough running conditions.

Smg transmission problems

The Sequential Manual Gearbox (SMG) can have issues with the hydraulic pump, clutch, or electronic components, leading to shifting problems.

Carbon build-up

Over time, carbon deposits can build up in the intake system, leading to reduced performance and fuel efficiency.

BMW M5 2007

The 2007 BMW M5 is a high-performance sedan equipped with a powerful 5.0-liter V10 engine producing over 500 horsepower. Manufactured in Dingolfing, Germany, this luxury vehicle features advanced safety systems, including dual-stage airbags and a direct tire pressure monitoring system. With a sleek design and seating for four, it epitomizes BMW's blend of performance and luxury.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

The 2007 BMW M5, with its high-performance V10 engine, is prone to oil leaks, often due to worn gaskets or seals.

Rod bearing wear

The V10 engine in the 2007 M5 is known for premature rod bearing wear, which can lead to engine damage if not addressed.

Vanos system failure

The variable valve timing system (VANOS) in BMW engines can fail, leading to performance issues and potential engine damage.

Throttle actuator issues

The electronic throttle actuators can fail, causing the engine to go into limp mode or run poorly.

Cooling system problems

The cooling system, including the water pump and thermostat, can be prone to failure, leading to overheating issues.

Carbon buildup

The high-performance nature of the engine can lead to carbon buildup on intake valves, affecting performance and efficiency.

BMW M5 2007

The 2007 BMW M5 is a high-performance sedan powered by a 5.0-liter V10 engine, generating over 500 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, this model includes advanced safety features like dual-stage airbags and a direct TPMS. It belongs to the 5-Series and is designed to provide a thrilling driving experience while maintaining the comfort and practicality of a four-door sedan.

Spec:

Engine Brake (hp) From

500

Engine Number of Cylinders

Problems:

Oil leaks

The 2007 BMW M5, with its high-performance V10 engine, is prone to oil leaks, often due to worn gaskets or seals.

Rod bearing wear

The V10 engine in the 2007 M5 is known for premature rod bearing wear, which can lead to engine damage if not addressed.

Vanos system failure

The variable valve timing system (VANOS) in BMW engines can fail, leading to performance issues and potential engine damage.

Throttle actuator issues

The electronic throttle actuators can fail, causing the engine to go into limp mode or run poorly.

Cooling system problems

The cooling system, including the water pump and thermostat, can be prone to failure, leading to overheating issues.

Carbon buildup

The high-performance nature of the engine can lead to carbon buildup on intake valves, affecting performance and efficiency.