Most Common Car Issues

Selected parameters

Add more parameters

MOST COMMON PROBLEMS

BMW M3Ci 2002

The 2002 BMW M3Ci is a sleek convertible powered by a robust 3.2L inline-six engine, delivering an impressive 333 horsepower. Manufactured by BMW M GmbH in Regensburg, Germany, this two-door vehicle offers a thrilling driving experience with its advanced safety features, including dual-stage airbags. As a member of the iconic BMW 3 Series, the M3Ci combines performance and luxury in a stylish package.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3Ci 2002

The 2002 BMW M3Ci Convertible is a stylish blend of performance and sophistication, powered by a robust 3.2L inline-six engine producing 333 horsepower. Crafted by BMW M GmbH in Regensburg, Germany, this two-door cabriolet offers the thrill of open-top driving. Equipped with advanced safety features including dual-stage airbags and manual seat belts, it ensures both excitement and protection. Perfect for those who appreciate high-performance engineering and the joy of a convertible ride.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 is a powerful sedan crafted by BMW M GmbH, featuring a 4.9-liter V8 engine producing 394 horsepower. With its sleek design and robust performance, this passenger car offers a luxurious driving experience. Manufactured in Dingolfing, Germany, the M5 combines advanced safety features like dual-stage airbags and a manual seat belt system for enhanced protection. Ideal for those seeking a blend of performance and sophistication, it remains a classic choice for enthusiasts.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3Ci 2002

The 2002 BMW M3Ci is a stunning convertible designed by BMW M GmbH, featuring a powerful 3.2-liter, 6-cylinder engine that delivers 333 horsepower. This two-door model combines exhilarating performance with the freedom of open-air driving. Manufactured in Regensburg, Germany, the M3Ci offers advanced safety features like dual-stage advanced supplemental restraint systems for the driver and passenger. With its classic design and robust engineering, the M3Ci remains a highly sought-after vehicle for enthusiasts.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3 2002

The 2002 BMW M3 is a sleek coupe powered by a 3.2-liter, 6-cylinder engine producing 333 horsepower, crafted by BMW M GmbH. This model features dual-stage advanced supplemental restraint systems for driver and passenger safety. Manufactured in Regensburg, Germany, it stands as a hallmark of BMW's performance engineering. With its classic two-door design, the M3 delivers a thrilling driving experience for enthusiasts.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW M3 engines, especially older models like the 2002, are known for developing oil leaks around the valve cover gasket, oil filter housing gasket, and oil pan gasket.

Vanos system issues

The Vanos (variable valve timing) system can experience problems, including rattling noises and decreased performance due to worn seals or solenoids.

Cooling system failures

The cooling system components such as the water pump, thermostat, and radiator are prone to failure, which can lead to overheating.

Rod bearing wear

The S54 engine in the 2002 BMW M3 is known for rod bearing wear, which can cause significant engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, leading to erratic engine behavior or reduced power.

Crankcase ventilation problems

Issues with the crankcase ventilation system can lead to increased oil consumption and rough idling.

Ignition coil failures

The ignition coils in this model may fail over time, causing misfires and engine performance issues.

BMW M3Ci 2002

The 2002 BMW M3Ci is a sleek convertible powered by a robust 3.2L inline-6 engine, delivering 333 horsepower. Built by BMW M GmbH in Regensburg, Germany, this two-door cabriolet boasts advanced safety features, including dual-stage airbags and manual seat belts. With its sporty design and high-performance engine, the M3Ci offers an exhilarating driving experience.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan with a powerful 4.9L V8 engine, delivering 394 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, this model features advanced safety systems, including dual-stage airbags. Designed for driving enthusiasts, it combines luxury and speed, all within a sleek four-door body.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan boasting a 4.9L V8 engine that delivers 394 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, it features a dual-stage advanced supplemental restraint system and manual seat belts for enhanced safety. This luxurious, gasoline-powered vehicle comfortably seats four with doors, making it a blend of power and sophistication.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3Ci 2002

The 2002 BMW M3Ci is a powerful convertible with a 3.2L inline-6 engine producing 333 hp. Manufactured by BMW M GmbH in Regensburg, Germany, this two-door cabriolet offers a thrilling driving experience with the safety of dual-stage advanced SRS airbags.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3 2002

The 2002 BMW M3 Coupe, crafted by BMW M GmbH in Regensburg, Germany, is a high-performance vehicle featuring a 3.2L inline-six engine producing 333 horsepower. This two-door sports car is equipped with advanced safety features, including dual-stage airbags and manual seat belts. Designed for driving enthusiasts, it combines power and precision with the renowned engineering of BMW.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW M3 engines, especially older models like the 2002, are known for developing oil leaks around the valve cover gasket, oil filter housing gasket, and oil pan gasket.

Vanos system issues

The Vanos (variable valve timing) system can experience problems, including rattling noises and decreased performance due to worn seals or solenoids.

Cooling system failures

The cooling system components such as the water pump, thermostat, and radiator are prone to failure, which can lead to overheating.

Rod bearing wear

The S54 engine in the 2002 BMW M3 is known for rod bearing wear, which can cause significant engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, leading to erratic engine behavior or reduced power.

Crankcase ventilation problems

Issues with the crankcase ventilation system can lead to increased oil consumption and rough idling.

Ignition coil failures

The ignition coils in this model may fail over time, causing misfires and engine performance issues.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan powered by a 4.9L V8 engine, delivering 394 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, this iconic model features advanced safety systems including dual-stage airbags and manual seat belts. With its luxurious design and robust engineering, the M5 remains a benchmark in the world of sports sedans.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 Sedan is a high-performance vehicle powered by a 4.9L V8 engine producing 394 hp. Manufactured by BMW M GmbH in Dingolfing, Germany, this iconic model features a dual-stage advanced supplemental restraint system and manual seat belts for safety. With a sleek design and robust engineering, it promises a thrilling drive.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan featuring a powerful 4.9L V8 engine with 394 hp, crafted by BMW M GmbH. With its sleek design, it offers seating for five and includes advanced safety features like dual-stage airbags. This model exemplifies German engineering and luxury, produced in Dingolfing, Germany. Perfect for enthusiasts seeking a blend of performance and refinement.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3Ci 2002

The 2002 BMW M3Ci Convertible is a high-performance vehicle powered by a 3.2L inline-six engine producing 333 hp, crafted by BMW M GmbH. This two-door cabriolet, manufactured in Regensburg, Germany, features dual-stage advanced SRS for both driver and passenger. Ideal for those seeking a blend of luxury and performance, it runs on gasoline and embodies BMW's renowned engineering excellence.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan powered by a robust 4.9L V8 engine delivering 394 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, this model features advanced safety systems, including dual-stage airbags. With its sleek design and powerful performance, the M5 is a standout in the luxury sports sedan class.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan equipped with a 4.9L V8 engine producing 394 horsepower. Manufactured by BMW M GmbH in Dingolfing, Germany, this model features advanced dual-stage SRS airbags and manual seat belts. With a focus on luxury and power, the M5 is an excellent choice for driving enthusiasts.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan powered by a 4.9L V8 engine producing 394 hp. Manufactured by BMW M GmbH in Dingolfing, Germany, this model offers advanced safety features, including dual-stage airbags for both driver and passenger. With its elegant design and powerful engine, this M5 balances luxury and performance seamlessly.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan powered by a 4.9L V8 engine producing 394 hp, crafted by BMW M GmbH. This German-engineered vehicle features dual-stage advanced airbags for the driver and passenger, and manual seat belts for safety. Built in Dingolfing, Germany, the M5 offers a blend of luxury and performance, making it a standout in the 5 Series line.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3Ci 2002

The 2002 BMW M3Ci Convertible, crafted by BMW M GmbH, boasts a 3.2L inline-6 engine producing 333 hp. With dual-stage advanced SRS for both driver and passenger, this two-door cabriolet promises both performance and safety. Made in Regensburg, Germany, it's a stylish and powerful choice for any driving enthusiast.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3Ci 2002

The 2002 BMW M3Ci is a 2-door convertible powered by a 3.2L inline-6 engine producing 333 horsepower. Manufactured by BMW M GmbH in Regensburg, Germany, it features advanced dual-stage airbags and manual seat belts. This performance-oriented cabriolet promises an exhilarating driving experience with the luxury and engineering excellence BMW is known for.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3 2002

The 2002 BMW M3 is a high-performance coupe crafted by BMW M GmbH, featuring a 3.2L inline-six engine producing 333 hp. With its sleek 2-door design, the M3 offers both driver and passenger airbags for safety. As a gasoline-powered vehicle, it falls under Class 1 with a gross vehicle weight rating of 6,000 lbs or less. Built in Regensburg, Germany, this model epitomizes BMW's commitment to engineering excellence.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW M3 engines, especially older models like the 2002, are known for developing oil leaks around the valve cover gasket, oil filter housing gasket, and oil pan gasket.

Vanos system issues

The Vanos (variable valve timing) system can experience problems, including rattling noises and decreased performance due to worn seals or solenoids.

Cooling system failures

The cooling system components such as the water pump, thermostat, and radiator are prone to failure, which can lead to overheating.

Rod bearing wear

The S54 engine in the 2002 BMW M3 is known for rod bearing wear, which can cause significant engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, leading to erratic engine behavior or reduced power.

Crankcase ventilation problems

Issues with the crankcase ventilation system can lead to increased oil consumption and rough idling.

Ignition coil failures

The ignition coils in this model may fail over time, causing misfires and engine performance issues.

BMW M3Ci 2002

The 2002 BMW M3Ci Convertible, crafted by BMW M GmbH in Germany, boasts a powerful 3.2L inline-six engine delivering 333 horsepower. This two-door cabriolet offers a thrilling open-air driving experience, enhanced by advanced dual-stage airbags. A true blend of performance and luxury, the M3Ci remains a standout in the world of high-performance convertibles.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW engines, especially from the early 2000s, are prone to oil leaks from the valve cover gasket or oil filter housing gasket.

Cooling system failure

The cooling system components, including the radiator, water pump, and thermostat, are known to fail and can lead to overheating.

Vanos unit issues

The variable valve timing system (VANOS) can experience issues, leading to rough idling, reduced performance, and engine noise.

Rod bearing wear

The S54 engine, used in the 2002 BMW M3, is known for premature rod bearing wear, which can cause severe engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, causing the engine to go into limp mode or have erratic throttle response.

Crankcase ventilation issues

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.

BMW M3 2002

The 2002 BMW M3 Coupe, powered by a 3.2L inline-6 engine from BMW M GmbH, delivers 333 hp. With a sleek 2-door design and advanced safety features, it's a blend of performance and luxury. Manufactured in Regensburg, Germany, this iconic model remains a favorite among enthusiasts.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW M3 engines, especially older models like the 2002, are known for developing oil leaks around the valve cover gasket, oil filter housing gasket, and oil pan gasket.

Vanos system issues

The Vanos (variable valve timing) system can experience problems, including rattling noises and decreased performance due to worn seals or solenoids.

Cooling system failures

The cooling system components such as the water pump, thermostat, and radiator are prone to failure, which can lead to overheating.

Rod bearing wear

The S54 engine in the 2002 BMW M3 is known for rod bearing wear, which can cause significant engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, leading to erratic engine behavior or reduced power.

Crankcase ventilation problems

Issues with the crankcase ventilation system can lead to increased oil consumption and rough idling.

Ignition coil failures

The ignition coils in this model may fail over time, causing misfires and engine performance issues.

BMW M3 2002

The 2002 BMW M3 Coupe, manufactured by BMW M GmbH, boasts a 3.2L inline-6 engine with 333 horsepower. This two-door sports car offers advanced safety with dual-stage airbags and manual seat belts. Built in Regensburg, Germany, it represents the pinnacle of BMW's engineering and performance in the early 2000s.

Spec:

Engine Brake (hp) From

333

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

BMW M3 engines, especially older models like the 2002, are known for developing oil leaks around the valve cover gasket, oil filter housing gasket, and oil pan gasket.

Vanos system issues

The Vanos (variable valve timing) system can experience problems, including rattling noises and decreased performance due to worn seals or solenoids.

Cooling system failures

The cooling system components such as the water pump, thermostat, and radiator are prone to failure, which can lead to overheating.

Rod bearing wear

The S54 engine in the 2002 BMW M3 is known for rod bearing wear, which can cause significant engine damage if not addressed.

Throttle actuator problems

The electronic throttle actuators can fail, leading to erratic engine behavior or reduced power.

Crankcase ventilation problems

Issues with the crankcase ventilation system can lead to increased oil consumption and rough idling.

Ignition coil failures

The ignition coils in this model may fail over time, causing misfires and engine performance issues.

BMW M5 2002

The 2002 BMW M5 is a high-performance sedan powered by a 4.9L V8 engine delivering 394 hp. Manufactured by BMW M GmbH in Dingolfing, Germany, this model features advanced dual-stage airbags and manual seat belts for safety. With its sleek design and robust performance, it remains a standout in the luxury car segment.

Spec:

Engine Brake (hp) From

394

Engine Manufacturer

BMW M GmbH

Engine Number of Cylinders

Problems:

Oil leaks

Over time, gaskets and seals can wear out, leading to oil leaks. This is common in older vehicles like the 2002 BMW M5.

Cooling system issues

The cooling system, including radiators and hoses, can develop leaks or failures, leading to overheating.

Vanos system problems

The BMW M5's Variable Nockenwellen Steuerung (VANOS) system can develop issues, affecting engine performance and efficiency.

Throttle actuator failure

The electronic throttle actuator can fail, causing reduced engine performance or erratic throttle response.

Rod bearing wear

High-performance engines like the one in the BMW M5 can experience rod bearing wear, which can lead to engine knocking or catastrophic failure if not addressed.

Ignition coil failure

The ignition coils can fail, leading to misfires, rough idling, and poor engine performance.

Timing chain tensioner issues

The timing chain tensioner can fail, leading to timing chain slack, which can cause engine noise or more severe damage if the timing chain skips a tooth.

Fuel pump failure

Over time, the fuel pump can fail, leading to poor fuel delivery and engine performance issues.

Ccv (crankcase ventilation) problems

The crankcase ventilation system can clog or fail, leading to increased oil consumption and potential engine damage.