VinCyp · Free Vin Decoder
Most Common Car Issues Vin Explorer

Most Common Car Issues

Selected parameters

Engine Manufacturer
BMW-AG
Model Year
1990

Add more parameters

Engine Brake (hp) From
Engine Model
Engine Number of Cylinders
Make
Model

MOST COMMON PROBLEMS

BMW 325iS 1990

The 1990 BMW 325iS is a classic sedan from the renowned German manufacturer, featuring a robust 2.5-liter inline-six engine that delivers 168 horsepower. Known for its sporty handling and timeless design, this two-door model is part of the iconic E30 series. Built in Regensburg, Germany, the 325iS exemplifies BMW's commitment to engineering excellence and driving pleasure.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325iS, especially with its six-cylinder engine, is prone to oil leaks from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system failures
The cooling system, including the radiator, water pump, and thermostat, can often fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain might wear out or fail, causing significant engine damage if not replaced or maintained properly.
Vacuum leaks
Vacuum leaks can cause rough idling, stalling, or poor engine performance, often due to aging hoses and gaskets.
Ignition system problems
Issues with the ignition coil, spark plugs, and distributor can lead to misfires or poor engine performance.
Fuel system issues
Fuel pump or fuel injector failures can lead to engine stalling, poor acceleration, and difficulty starting.
Mass air flow sensor failure
A faulty MAF sensor can cause incorrect air-fuel mixture leading to poor fuel economy and performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or fail to start.
BMW 325iS 1990

The 1990 BMW 325iS is a classic sedan from the renowned German manufacturer BMW AG. Featuring a 2.5-liter inline-six engine with 168 horsepower, this two-door model is part of the E30 series. Built in Regensburg, Germany, it runs on gasoline and comes equipped with a manual seat belt and a supplemental restraint system for added safety. The 325iS is a testament to BMW's engineering excellence during the era.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325iS, especially with its six-cylinder engine, is prone to oil leaks from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system failures
The cooling system, including the radiator, water pump, and thermostat, can often fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain might wear out or fail, causing significant engine damage if not replaced or maintained properly.
Vacuum leaks
Vacuum leaks can cause rough idling, stalling, or poor engine performance, often due to aging hoses and gaskets.
Ignition system problems
Issues with the ignition coil, spark plugs, and distributor can lead to misfires or poor engine performance.
Fuel system issues
Fuel pump or fuel injector failures can lead to engine stalling, poor acceleration, and difficulty starting.
Mass air flow sensor failure
A faulty MAF sensor can cause incorrect air-fuel mixture leading to poor fuel economy and performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or fail to start.
BMW 325ix 1990

The 1990 BMW 325ix is a classic sedan powered by a 2.5L inline-6 engine producing 168 hp. Manufactured in Regensburg, Germany, this model is part of the BMW 3 Series (E30/16) and features a 4-door body style with manual seat belts and a supplemental restraint system (SRS). It runs on gasoline and embodies the engineering excellence BMW is known for.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
Common in older BMW engines, often caused by worn gaskets and seals.
Overheating
Can be due to a failing water pump, clogged radiator, or a stuck thermostat.
Timing belt/chain issues
Wear and tear over time can lead to timing belt or chain failure, affecting engine performance.
Ignition system problems
Issues with spark plugs, ignition coils, or distributor cap can cause misfires or poor engine performance.
Vacuum leaks
Cracked or brittle vacuum hoses can cause rough idling or stalling.
Fuel system issues
Problems with the fuel pump, fuel injectors, or fuel filter can lead to poor engine performance or starting issues.
Cooling system failures
Radiator, hoses, or coolant reservoir problems can cause coolant leaks and engine overheating.
Valve cover gasket failure
Can lead to oil leaks and contamination of the ignition system.
Mass air flow (maf) sensor failure
Can cause incorrect air-fuel mixture, leading to poor engine performance and fuel economy.
Crankshaft position sensor failure
Can cause engine stalling or failure to start.
BMW 325iC 1990

The 1990 BMW 325iC is a classic convertible from the renowned 3-Series E30 lineup. Powered by a 2.5L inline-six engine producing 188 hp, this cabriolet offers both style and performance. Manufactured in Regensburg, Germany, it features a manual seat belt system and an automatic transmission. This vehicle epitomizes BMW's commitment to driving pleasure and timeless design.

Spec:

Engine Brake (hp) From
188
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6

Problems:

Oil leaks
BMW engines from the 1990s are known for developing oil leaks, particularly from the valve cover gasket and oil pan gasket.
Overheating
The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain can wear out over time, causing poor engine performance or even catastrophic engine damage if it fails.
Fuel injector problems
Fuel injectors can become clogged or fail, which leads to poor fuel economy and engine misfires.
Vacuum leaks
Older BMW engines can develop vacuum leaks, causing rough idling and poor fuel efficiency.
Ignition system problems
Issues with the ignition coils or spark plugs can lead to misfires and poor engine performance.
Head gasket failure
The head gasket can fail, leading to coolant leaks, oil contamination, and engine overheating.
Mass air flow (maf) sensor failure
A failing MAF sensor can cause erratic engine behavior and reduced fuel efficiency.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and decreased engine performance.
Idle control valve issues
The idle control valve can become dirty or fail, causing unstable idling and stalling.
BMW 535i 1990

The 1990 BMW 535i sedan is powered by a 3.4L inline-six engine producing 182 hp, manufactured by BMW AG. This classic model features a four-door body and manual seat belts. Built in Dingolfing, Germany, it falls under the Class 1 weight category, making it a lightweight yet dynamic passenger car.

Spec:

Engine Brake (hp) From
182
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The BMW 535i from 1990 often experiences oil leaks due to aging gaskets and seals.
Cooling system failure
Radiators, water pumps, and hoses can deteriorate over time, leading to engine overheating.
Vacuum leaks
Vacuum lines and intake boots may crack or become brittle, causing engine performance issues.
Fuel system issues
Fuel injectors and fuel pumps may become clogged or fail due to age, affecting fuel delivery.
Timing chain wear
The timing chain and its components can wear out, leading to engine noise and potential failure.
Electrical problems
Older wiring and connectors may lead to various electrical issues, affecting engine performance and reliability.
Valve cover gasket failure
The valve cover gasket is prone to leaking oil, which can cause engine misfires and other issues.
BMW 325iS 1990

The 1990 BMW 325iS is a classic 2-door sedan from the E30 series, powered by a 2.5-liter inline-6 engine producing 168 hp. Manufactured in Regensburg, Germany, this passenger car features manual seat belts and runs on gasoline. Its blend of performance and style makes it a standout from the iconic 3 Series.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325iS, especially with its six-cylinder engine, is prone to oil leaks from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system failures
The cooling system, including the radiator, water pump, and thermostat, can often fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain might wear out or fail, causing significant engine damage if not replaced or maintained properly.
Vacuum leaks
Vacuum leaks can cause rough idling, stalling, or poor engine performance, often due to aging hoses and gaskets.
Ignition system problems
Issues with the ignition coil, spark plugs, and distributor can lead to misfires or poor engine performance.
Fuel system issues
Fuel pump or fuel injector failures can lead to engine stalling, poor acceleration, and difficulty starting.
Mass air flow sensor failure
A faulty MAF sensor can cause incorrect air-fuel mixture leading to poor fuel economy and performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or fail to start.
BMW 325iS 1990

The 1990 BMW 325iS is a classic 2-door sedan with a 2.5-liter inline-6 engine producing 168 hp. Manufactured in Regensburg, Germany, this E30 series model is known for its sporty performance and robust engineering. It features a manual seat belt system and an optional driver Supplemental Restraint System (SRS).

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325iS, especially with its six-cylinder engine, is prone to oil leaks from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system failures
The cooling system, including the radiator, water pump, and thermostat, can often fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain might wear out or fail, causing significant engine damage if not replaced or maintained properly.
Vacuum leaks
Vacuum leaks can cause rough idling, stalling, or poor engine performance, often due to aging hoses and gaskets.
Ignition system problems
Issues with the ignition coil, spark plugs, and distributor can lead to misfires or poor engine performance.
Fuel system issues
Fuel pump or fuel injector failures can lead to engine stalling, poor acceleration, and difficulty starting.
Mass air flow sensor failure
A faulty MAF sensor can cause incorrect air-fuel mixture leading to poor fuel economy and performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or fail to start.
BMW 325iC 1990

Experience the thrill of open-air driving with the 1990 BMW 325iC Convertible. This classic beauty from the 3-Series E30 lineup features a robust 2.5L 6-cylinder engine, delivering 188 hp. Crafted in Regensburg, Germany, the 325iC Cabrio combines BMW's engineering excellence with timeless style. Perfect for those who appreciate both performance and luxury in a two-door convertible.

Spec:

Engine Brake (hp) From
188
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6

Problems:

Oil leaks
BMW engines from the 1990s are known for developing oil leaks, particularly from the valve cover gasket and oil pan gasket.
Overheating
The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain can wear out over time, causing poor engine performance or even catastrophic engine damage if it fails.
Fuel injector problems
Fuel injectors can become clogged or fail, which leads to poor fuel economy and engine misfires.
Vacuum leaks
Older BMW engines can develop vacuum leaks, causing rough idling and poor fuel efficiency.
Ignition system problems
Issues with the ignition coils or spark plugs can lead to misfires and poor engine performance.
Head gasket failure
The head gasket can fail, leading to coolant leaks, oil contamination, and engine overheating.
Mass air flow (maf) sensor failure
A failing MAF sensor can cause erratic engine behavior and reduced fuel efficiency.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and decreased engine performance.
Idle control valve issues
The idle control valve can become dirty or fail, causing unstable idling and stalling.
BMW 325i 1990

The 1990 BMW 325i is a classic sedan from the renowned 3 Series E30 lineup. Powered by a 2.5L inline-6 engine producing 168 hp, it offers a smooth driving experience. Manufactured in Regensburg, Germany, this 4-door passenger car features an automatic transmission and runs on gasoline. Its lightweight build, with a gross vehicle weight rating of under 6,000 lb, enhances its agility and performance.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325i is known for developing oil leaks, especially from the valve cover gasket and oil pan gasket.
Cooling system issues
The cooling system can be problematic, with common issues including a failing water pump, radiator, or thermostat which can lead to overheating.
Timing belt wear
The timing belt on the 1990 BMW 325i needs regular replacement as it can wear out and potentially break, causing major engine damage.
Vacuum leaks
Vacuum leaks are common and can cause rough idling, poor fuel economy, and performance issues.
Fuel pump failure
The fuel pump may fail over time, leading to starting issues or engine stalling.
Electrical problems
Older BMW models like the 325i often experience electrical issues, such as with the alternator, battery, or wiring.
Ignition system issues
Problems with the ignition system, such as worn spark plugs or a faulty ignition coil, can lead to misfires and poor engine performance.
Mass air flow (maf) sensor failure
The MAF sensor can become dirty or fail, causing erratic engine performance and poor fuel efficiency.
BMW 325iC 1990

The 1990 BMW 325iC is a stylish convertible from the renowned 3 Series, specifically the E30 lineup. Powered by a 2.5L 6-cylinder engine producing 168 hp, this cabriolet offers a classic open-air driving experience. Manufactured in Regensburg, Germany, it features a manual seat belt system and BMW's supplemental restraint system for added safety. Perfect for those who crave a blend of performance and luxury in a compact, two-door package.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
Older BMW engines, including those from the 1990s, are prone to oil leaks due to deteriorating gaskets and seals.
Overheating
The cooling systems in older BMW models can be problematic, often due to failing water pumps, radiators, or thermostat issues.
Timing belt/chain issues
The timing belt or chain may wear out or fail, leading to poor engine performance or even catastrophic engine damage.
Vacuum leaks
Vacuum hoses and intake manifold gaskets can deteriorate over time, leading to air leaks that affect engine performance.
Fuel injector problems
Fuel injectors can become clogged or fail, leading to poor fuel delivery and engine misfires.
Ignition system failures
Components like spark plugs, ignition coils, and distributor caps can wear out, leading to misfires and poor engine performance.
Carbon build-up
Over time, carbon deposits can build up in the intake manifold and on the valves, affecting engine efficiency and performance.
Sensor failures
Sensors such as the oxygen sensor, mass airflow sensor, and crankshaft position sensor can fail, leading to poor engine performance and fuel efficiency.
BMW 325iS 1990

The 1990 BMW 325iS is a classic 2-door sedan from the renowned E30 series. Powered by a 2.5L inline-6 engine producing 168 hp, it features an automatic transmission and runs on gasoline. Manufactured in Regensburg, Germany, it includes a Dr. Supplemental Restraint System (SRS) for added safety. This model is a quintessential example of BMW's engineering excellence in the late '80s and early '90s.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6

Problems:

Oil leaks
The BMW 325iS from 1990 often suffers from oil leaks due to aging gaskets and seals, particularly around the valve cover and oil pan.
Cooling system failures
Issues with the radiator, water pump, and thermostat are common, leading to engine overheating.
Timing belt/tensioner wear
The timing belt and tensioner can wear out, potentially causing engine misfires or catastrophic failure if not replaced at regular intervals.
Fuel system problems
Problems with the fuel injectors or fuel pump can lead to poor engine performance or starting issues.
Vacuum leaks
Leaks in the vacuum system can cause rough idling or stalling.
Electrical issues
Aging wiring and connectors can lead to various electrical problems, including issues with the engine control unit (ECU).
BMW 325iS 1990

The 1990 BMW 325iS is a classic 2-door sedan powered by a 2.5L inline-6 engine, producing 168 horsepower. Manufactured in Regensburg, Germany, this E30 series model features a manual seat belt system and a driver supplemental restraint system (SRS). This gasoline-powered vehicle is a part of BMW's renowned 3 Series lineup.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325iS, especially with its six-cylinder engine, is prone to oil leaks from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system failures
The cooling system, including the radiator, water pump, and thermostat, can often fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain might wear out or fail, causing significant engine damage if not replaced or maintained properly.
Vacuum leaks
Vacuum leaks can cause rough idling, stalling, or poor engine performance, often due to aging hoses and gaskets.
Ignition system problems
Issues with the ignition coil, spark plugs, and distributor can lead to misfires or poor engine performance.
Fuel system issues
Fuel pump or fuel injector failures can lead to engine stalling, poor acceleration, and difficulty starting.
Mass air flow sensor failure
A faulty MAF sensor can cause incorrect air-fuel mixture leading to poor fuel economy and performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or fail to start.
BMW 750iL 1990

The 1990 BMW 750iL is a luxury sedan from the 7-series, featuring a powerful 4.98L V12 engine producing 295 hp. Manufactured in Dingolfing, Germany, this model includes a Dr. Supplemental Restraint System (SRS) and manual seat belts. It's a classic example of BMW's engineering prowess and elegance from that era.

Spec:

Engine Brake (hp) From
295
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
12

Problems:

Oil leaks
Common in older BMW engines due to aging seals and gaskets.
Cooling system failures
Radiator, water pump, and thermostat issues leading to overheating.
Timing chain wear
Can cause engine misfires or complete engine failure if not maintained.
Vacuum leaks
Can affect engine performance and fuel efficiency.
Fuel injector problems
Clogs or failures can lead to poor engine performance.
Ignition coil failures
Can lead to misfires and poor engine performance.
Valve cover gasket failure
Can cause oil leaks and affect engine performance.
Mass air flow (maf) sensor issues
Can lead to poor fuel economy and engine performance.
BMW 325iS 1990

The 1990 BMW 325iS is a classic 2-door sedan with a 2.5L inline-6 engine, producing 168 horsepower. Manufactured in Regensburg, Germany, this E30 series model features a manual seat belt system and a Dr. Supplemental Restraint System (SRS). It's a quintessential example of BMW's engineering prowess from the early '90s.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325iS, especially with its six-cylinder engine, is prone to oil leaks from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system failures
The cooling system, including the radiator, water pump, and thermostat, can often fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain might wear out or fail, causing significant engine damage if not replaced or maintained properly.
Vacuum leaks
Vacuum leaks can cause rough idling, stalling, or poor engine performance, often due to aging hoses and gaskets.
Ignition system problems
Issues with the ignition coil, spark plugs, and distributor can lead to misfires or poor engine performance.
Fuel system issues
Fuel pump or fuel injector failures can lead to engine stalling, poor acceleration, and difficulty starting.
Mass air flow sensor failure
A faulty MAF sensor can cause incorrect air-fuel mixture leading to poor fuel economy and performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or fail to start.
BMW 325iC 1990

The 1990 BMW 325iC Convertible is a classic 3-Series Cabrio with a 2.5L 6-cylinder engine producing 188 hp. Manufactured by BMW AG in Regensburg, Germany, this sleek Cabriolet features an automatic transmission and is designed for optimal performance and style. With a Gross Vehicle Weight Rating of under 6,000 lbs, it promises a lightweight yet powerful driving experience.

Spec:

Engine Brake (hp) From
188
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6

Problems:

Oil leaks
BMW engines from the 1990s are known for developing oil leaks, particularly from the valve cover gasket and oil pan gasket.
Overheating
The cooling system components, such as the radiator, water pump, and thermostat, can fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain can wear out over time, causing poor engine performance or even catastrophic engine damage if it fails.
Fuel injector problems
Fuel injectors can become clogged or fail, which leads to poor fuel economy and engine misfires.
Vacuum leaks
Older BMW engines can develop vacuum leaks, causing rough idling and poor fuel efficiency.
Ignition system problems
Issues with the ignition coils or spark plugs can lead to misfires and poor engine performance.
Head gasket failure
The head gasket can fail, leading to coolant leaks, oil contamination, and engine overheating.
Mass air flow (maf) sensor failure
A failing MAF sensor can cause erratic engine behavior and reduced fuel efficiency.
Exhaust manifold cracks
The exhaust manifold can develop cracks over time, leading to exhaust leaks and decreased engine performance.
Idle control valve issues
The idle control valve can become dirty or fail, causing unstable idling and stalling.
BMW 535i 1990

The 1990 BMW 535i is a classic sedan powered by a 3.4L inline-six engine producing 182 horsepower. Manufactured in Dingolfing, Germany, it features a four-door design and manual seat belts with a driver supplemental restraint system. This model is part of BMW's renowned 5 Series, offering a balance of performance and luxury.

Spec:

Engine Brake (hp) From
182
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The BMW 535i from 1990 often experiences oil leaks due to aging gaskets and seals.
Cooling system failure
Radiators, water pumps, and hoses can deteriorate over time, leading to engine overheating.
Vacuum leaks
Vacuum lines and intake boots may crack or become brittle, causing engine performance issues.
Fuel system issues
Fuel injectors and fuel pumps may become clogged or fail due to age, affecting fuel delivery.
Timing chain wear
The timing chain and its components can wear out, leading to engine noise and potential failure.
Electrical problems
Older wiring and connectors may lead to various electrical issues, affecting engine performance and reliability.
Valve cover gasket failure
The valve cover gasket is prone to leaking oil, which can cause engine misfires and other issues.
BMW 535i 1990

The 1990 BMW 535i is a classic sedan powered by a 3.4L inline-6 engine producing 182 horsepower. Manufactured by BMW AG in Dingolfing, Germany, this model features a four-door body style and manual seat belts. It's a member of the 5 Series with a gross vehicle weight rating of up to 6,000 lbs.

Spec:

Engine Brake (hp) From
182
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The BMW 535i from 1990 often experiences oil leaks due to aging gaskets and seals.
Cooling system failure
Radiators, water pumps, and hoses can deteriorate over time, leading to engine overheating.
Vacuum leaks
Vacuum lines and intake boots may crack or become brittle, causing engine performance issues.
Fuel system issues
Fuel injectors and fuel pumps may become clogged or fail due to age, affecting fuel delivery.
Timing chain wear
The timing chain and its components can wear out, leading to engine noise and potential failure.
Electrical problems
Older wiring and connectors may lead to various electrical issues, affecting engine performance and reliability.
Valve cover gasket failure
The valve cover gasket is prone to leaking oil, which can cause engine misfires and other issues.
BMW 325iS 1990

The 1990 BMW 325iS is a sleek 2-door sedan powered by a 2.5L inline-6 engine producing 168 hp. Manufactured in Regensburg, Germany, this E30 series model uses gasoline and features a manual seat belt system along with a Supplemental Restraint System (SRS). A true classic in the BMW 3 Series lineup.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325iS, especially with its six-cylinder engine, is prone to oil leaks from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system failures
The cooling system, including the radiator, water pump, and thermostat, can often fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain might wear out or fail, causing significant engine damage if not replaced or maintained properly.
Vacuum leaks
Vacuum leaks can cause rough idling, stalling, or poor engine performance, often due to aging hoses and gaskets.
Ignition system problems
Issues with the ignition coil, spark plugs, and distributor can lead to misfires or poor engine performance.
Fuel system issues
Fuel pump or fuel injector failures can lead to engine stalling, poor acceleration, and difficulty starting.
Mass air flow sensor failure
A faulty MAF sensor can cause incorrect air-fuel mixture leading to poor fuel economy and performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or fail to start.
BMW 325iC 1990

The 1990 BMW 325iC is a classic convertible with a 2.5L inline-six engine producing 168 hp. This two-door cabriolet is part of the E30 series and is manufactured in Regensburg, Germany. It runs on gasoline and falls under the Class 1 weight category (6,000 lb or less). With its timeless design and engaging drive, it remains a beloved model among BMW enthusiasts.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
Older BMW engines, including those from the 1990s, are prone to oil leaks due to deteriorating gaskets and seals.
Overheating
The cooling systems in older BMW models can be problematic, often due to failing water pumps, radiators, or thermostat issues.
Timing belt/chain issues
The timing belt or chain may wear out or fail, leading to poor engine performance or even catastrophic engine damage.
Vacuum leaks
Vacuum hoses and intake manifold gaskets can deteriorate over time, leading to air leaks that affect engine performance.
Fuel injector problems
Fuel injectors can become clogged or fail, leading to poor fuel delivery and engine misfires.
Ignition system failures
Components like spark plugs, ignition coils, and distributor caps can wear out, leading to misfires and poor engine performance.
Carbon build-up
Over time, carbon deposits can build up in the intake manifold and on the valves, affecting engine efficiency and performance.
Sensor failures
Sensors such as the oxygen sensor, mass airflow sensor, and crankshaft position sensor can fail, leading to poor engine performance and fuel efficiency.
BMW 325i 1990

The 1990 BMW 325i is a classic sedan featuring a 2.5-liter inline-six engine with 168 horsepower. Manufactured in Regensburg, Germany, this E30 series model offers four doors, manual seat belts, and a supplemental restraint system. It's a part of BMW's esteemed 3 Series, known for its balance of performance and luxury.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325i is known for developing oil leaks, especially from the valve cover gasket and oil pan gasket.
Cooling system issues
The cooling system can be problematic, with common issues including a failing water pump, radiator, or thermostat which can lead to overheating.
Timing belt wear
The timing belt on the 1990 BMW 325i needs regular replacement as it can wear out and potentially break, causing major engine damage.
Vacuum leaks
Vacuum leaks are common and can cause rough idling, poor fuel economy, and performance issues.
Fuel pump failure
The fuel pump may fail over time, leading to starting issues or engine stalling.
Electrical problems
Older BMW models like the 325i often experience electrical issues, such as with the alternator, battery, or wiring.
Ignition system issues
Problems with the ignition system, such as worn spark plugs or a faulty ignition coil, can lead to misfires and poor engine performance.
Mass air flow (maf) sensor failure
The MAF sensor can become dirty or fail, causing erratic engine performance and poor fuel efficiency.
BMW 325iS 1990

The 1990 BMW 325iS is a classic 2-door sedan powered by a 2.5L inline-6 engine producing 168 horsepower. Manufactured in Regensburg, Germany, this E30 series model features a manual seat belt system and a Driver Supplemental Restraint System (SRS). This iconic vehicle offers the quintessential blend of performance and style that BMW is known for.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1990 BMW 325iS, especially with its six-cylinder engine, is prone to oil leaks from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system failures
The cooling system, including the radiator, water pump, and thermostat, can often fail, leading to overheating issues.
Timing belt/chain issues
The timing belt or chain might wear out or fail, causing significant engine damage if not replaced or maintained properly.
Vacuum leaks
Vacuum leaks can cause rough idling, stalling, or poor engine performance, often due to aging hoses and gaskets.
Ignition system problems
Issues with the ignition coil, spark plugs, and distributor can lead to misfires or poor engine performance.
Fuel system issues
Fuel pump or fuel injector failures can lead to engine stalling, poor acceleration, and difficulty starting.
Mass air flow sensor failure
A faulty MAF sensor can cause incorrect air-fuel mixture leading to poor fuel economy and performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or fail to start.
© Copyright 2024 VinCyp.com Privacy Policy
VIN Decoder (vincyp.com) does not guarantee the accuracy of provided information, including technical data, features, specifications, indicators, etc. All manufacturers' logos, brands, and trademarks are the property of their respective owners.