Most Common Car Issues
Add more parameters
MOST COMMON PROBLEMS
BMW 325ix 1990
The 1990 BMW 325ix is a classic sedan powered by a 2.5L inline-6 engine producing 168 hp. Manufactured in Regensburg, Germany, this model is part of the BMW 3 Series (E30/16) and features a 4-door body style with manual seat belts and a supplemental restraint system (SRS). It runs on gasoline and embodies the engineering excellence BMW is known for.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Common in older BMW engines, often caused by worn gaskets and seals.
Overheating
Can be due to a failing water pump, clogged radiator, or a stuck thermostat.
Timing belt/chain issues
Wear and tear over time can lead to timing belt or chain failure, affecting engine performance.
Ignition system problems
Issues with spark plugs, ignition coils, or distributor cap can cause misfires or poor engine performance.
Vacuum leaks
Cracked or brittle vacuum hoses can cause rough idling or stalling.
Fuel system issues
Problems with the fuel pump, fuel injectors, or fuel filter can lead to poor engine performance or starting issues.
Cooling system failures
Radiator, hoses, or coolant reservoir problems can cause coolant leaks and engine overheating.
Valve cover gasket failure
Can lead to oil leaks and contamination of the ignition system.
Mass air flow (maf) sensor failure
Can cause incorrect air-fuel mixture, leading to poor engine performance and fuel economy.
Crankshaft position sensor failure
Can cause engine stalling or failure to start.
BMW 325ix 1989
The 1989 BMW 325ix is a classic 2-door sedan featuring a 2.5L inline-6 engine producing 168 hp. This model, manufactured by BMW AG in Regensburg, Germany, offers a 4-wheel drive system and runs on gasoline. Part of the 3 Series E30/16, it combines performance with iconic design.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
The 1989 BMW 325ix is known for oil leaks, particularly from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system issues
This model often experiences problems with the cooling system, including radiator leaks, water pump failures, and thermostat malfunctions.
Timing belt wear
The timing belt on this vehicle requires regular replacement to avoid failure, which could lead to severe engine damage.
Fuel injector problems
Clogged or malfunctioning fuel injectors are common, leading to poor performance and fuel economy.
Idle control valve failure
The idle control valve can fail, causing rough idling or stalling.
Vacuum leaks
Vacuum hoses and seals may deteriorate over time, leading to vacuum leaks that affect engine performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause starting issues and erratic engine behavior.
Mass air flow sensor issues
A faulty mass air flow sensor can result in incorrect air/fuel mixture, leading to performance problems and poor fuel economy.
Exhaust manifold leaks
Cracks or leaks in the exhaust manifold can lead to exhaust fumes entering the cabin and reduced engine efficiency.
Spark plug and ignition coil problems
Worn spark plugs or failing ignition coils can cause misfires and rough engine performance.
BMW 325ix 1989
The 1989 BMW 325ix is a classic 2-door sedan equipped with a 2.5L inline-6 engine producing 168 hp. This model features a 4-wheel drive system and was manufactured in Regensburg, Germany. As part of the BMW 3 Series (E30/16), it combines performance and style, making it a standout in its era.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
The 1989 BMW 325ix is known for oil leaks, particularly from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system issues
This model often experiences problems with the cooling system, including radiator leaks, water pump failures, and thermostat malfunctions.
Timing belt wear
The timing belt on this vehicle requires regular replacement to avoid failure, which could lead to severe engine damage.
Fuel injector problems
Clogged or malfunctioning fuel injectors are common, leading to poor performance and fuel economy.
Idle control valve failure
The idle control valve can fail, causing rough idling or stalling.
Vacuum leaks
Vacuum hoses and seals may deteriorate over time, leading to vacuum leaks that affect engine performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause starting issues and erratic engine behavior.
Mass air flow sensor issues
A faulty mass air flow sensor can result in incorrect air/fuel mixture, leading to performance problems and poor fuel economy.
Exhaust manifold leaks
Cracks or leaks in the exhaust manifold can lead to exhaust fumes entering the cabin and reduced engine efficiency.
Spark plug and ignition coil problems
Worn spark plugs or failing ignition coils can cause misfires and rough engine performance.
BMW 325ix 1991
The 1991 BMW 325ix is a classic sedan with a 6-cylinder engine producing 168 horsepower. Manufactured in Regensburg, Germany, this model features a 2-door design and an automatic transmission. It runs on gasoline and is part of BMW's renowned 3 Series, specifically the E30/16.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Older BMW engines, especially from the early '90s, are prone to develop oil leaks due to worn gaskets and seals.
Cooling system failures
The cooling systems in these models are known to have issues with the radiator, water pump, and thermostat, leading to overheating.
Vacuum leaks
The intake manifold and various vacuum lines can develop leaks over time, causing rough idling and poor performance.
Worn timing belt/chain
Depending on the specific engine, the timing belt or chain can wear out, leading to potential engine damage if not replaced timely.
Faulty ignition coils
Ignition coils can fail, causing misfires and poor engine performance.
Fuel injector problems
Clogged or failing fuel injectors can lead to uneven engine performance and reduced fuel efficiency.
Valve cover gasket failure
The valve cover gasket is prone to leaking, which can cause oil to seep into the spark plug wells.
Mass air flow (maf) sensor issues
A failing MAF sensor can cause the engine to run lean or rich, affecting performance and fuel economy.
Crankshaft position sensor failure
A faulty sensor can result in intermittent stalling or a no-start condition.
Idle control valve problems
The idle control valve can become dirty or fail, leading to unstable idle speeds.
BMW 325ix 1991
The 1991 BMW 325ix is a classic sedan featuring a 152cc, 6-cylinder engine capable of delivering 168 horsepower. Manufactured in Regensburg, Germany, this model comes with a supplemental restraint system and manual seat belts. It offers an automatic transmission and runs on gasoline. Part of the 3 Series, it represents the E30/16 lineage.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Older BMW engines, especially from the early '90s, are prone to develop oil leaks due to worn gaskets and seals.
Cooling system failures
The cooling systems in these models are known to have issues with the radiator, water pump, and thermostat, leading to overheating.
Vacuum leaks
The intake manifold and various vacuum lines can develop leaks over time, causing rough idling and poor performance.
Worn timing belt/chain
Depending on the specific engine, the timing belt or chain can wear out, leading to potential engine damage if not replaced timely.
Faulty ignition coils
Ignition coils can fail, causing misfires and poor engine performance.
Fuel injector problems
Clogged or failing fuel injectors can lead to uneven engine performance and reduced fuel efficiency.
Valve cover gasket failure
The valve cover gasket is prone to leaking, which can cause oil to seep into the spark plug wells.
Mass air flow (maf) sensor issues
A failing MAF sensor can cause the engine to run lean or rich, affecting performance and fuel economy.
Crankshaft position sensor failure
A faulty sensor can result in intermittent stalling or a no-start condition.
Idle control valve problems
The idle control valve can become dirty or fail, leading to unstable idle speeds.
BMW 325ix 1991
The 1991 BMW 325ix is a classic sedan featuring a 2.5L inline-6 engine that delivers 168 hp. Manufactured in Regensburg, Germany, it comes equipped with a 4-door configuration and an automatic transmission. This model belongs to the E30 series and includes a Dr. Supplemental Restraint System (SRS) for enhanced safety.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
Older BMW engines, especially from the early '90s, are prone to develop oil leaks due to worn gaskets and seals.
Cooling system failures
The cooling systems in these models are known to have issues with the radiator, water pump, and thermostat, leading to overheating.
Vacuum leaks
The intake manifold and various vacuum lines can develop leaks over time, causing rough idling and poor performance.
Worn timing belt/chain
Depending on the specific engine, the timing belt or chain can wear out, leading to potential engine damage if not replaced timely.
Faulty ignition coils
Ignition coils can fail, causing misfires and poor engine performance.
Fuel injector problems
Clogged or failing fuel injectors can lead to uneven engine performance and reduced fuel efficiency.
Valve cover gasket failure
The valve cover gasket is prone to leaking, which can cause oil to seep into the spark plug wells.
Mass air flow (maf) sensor issues
A failing MAF sensor can cause the engine to run lean or rich, affecting performance and fuel economy.
Crankshaft position sensor failure
A faulty sensor can result in intermittent stalling or a no-start condition.
Idle control valve problems
The idle control valve can become dirty or fail, leading to unstable idle speeds.
BMW 325ix 1989
The 1989 BMW 325ix is a classic 4-door sedan with a 2.5L inline-6 engine producing 168 hp. This all-wheel-drive vehicle comes with an automatic transmission and is part of the iconic E30 3 Series. Manufactured in Regensburg, Germany, it combines BMW's engineering excellence with timeless design. Perfect for enthusiasts of vintage performance cars.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
The 1989 BMW 325ix is known for oil leaks, particularly from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system issues
This model often experiences problems with the cooling system, including radiator leaks, water pump failures, and thermostat malfunctions.
Timing belt wear
The timing belt on this vehicle requires regular replacement to avoid failure, which could lead to severe engine damage.
Fuel injector problems
Clogged or malfunctioning fuel injectors are common, leading to poor performance and fuel economy.
Idle control valve failure
The idle control valve can fail, causing rough idling or stalling.
Vacuum leaks
Vacuum hoses and seals may deteriorate over time, leading to vacuum leaks that affect engine performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause starting issues and erratic engine behavior.
Mass air flow sensor issues
A faulty mass air flow sensor can result in incorrect air/fuel mixture, leading to performance problems and poor fuel economy.
Exhaust manifold leaks
Cracks or leaks in the exhaust manifold can lead to exhaust fumes entering the cabin and reduced engine efficiency.
Spark plug and ignition coil problems
Worn spark plugs or failing ignition coils can cause misfires and rough engine performance.
BMW 325ix 1989
The 1989 BMW 325ix is a classic sedan with a 2.5L inline-6 engine producing 168 hp, manufactured by BMW AG in Regensburg, Germany. It features a 4WD drivetrain, automatic transmission, and accommodates up to four passengers. This model is part of the 3 Series, specifically the E30/16 variant.
Spec:
Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
The 1989 BMW 325ix is known for oil leaks, particularly from the valve cover gasket, oil pan gasket, and rear main seal.
Cooling system issues
This model often experiences problems with the cooling system, including radiator leaks, water pump failures, and thermostat malfunctions.
Timing belt wear
The timing belt on this vehicle requires regular replacement to avoid failure, which could lead to severe engine damage.
Fuel injector problems
Clogged or malfunctioning fuel injectors are common, leading to poor performance and fuel economy.
Idle control valve failure
The idle control valve can fail, causing rough idling or stalling.
Vacuum leaks
Vacuum hoses and seals may deteriorate over time, leading to vacuum leaks that affect engine performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause starting issues and erratic engine behavior.
Mass air flow sensor issues
A faulty mass air flow sensor can result in incorrect air/fuel mixture, leading to performance problems and poor fuel economy.
Exhaust manifold leaks
Cracks or leaks in the exhaust manifold can lead to exhaust fumes entering the cabin and reduced engine efficiency.
Spark plug and ignition coil problems
Worn spark plugs or failing ignition coils can cause misfires and rough engine performance.