Most Common Car Issues

Selected parameters

Add more parameters

MOST COMMON PROBLEMS

BMW M3 1988

The 1988 BMW M3 Coupe is a classic performance vehicle featuring a 2.3L engine producing 192 hp. Manufactured by BMW M GmbH in Germany, this iconic model is part of the 3-Series and designed for enthusiasts who appreciate precision engineering and sporty driving dynamics. With its lightweight body and manual seat belts, it's a quintessential example of 80s automotive excellence.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic coupe with a 2.3L engine producing 192 hp, crafted by BMW-MOTORSPORT GmbH. With a sleek 2-door design, it belongs to the 3-Series and was manufactured in Munich or Dingolfing, Germany. This iconic vehicle runs on gasoline and falls within the Class 1 weight category.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic 2-door coupe powered by a 2.3L engine producing 192 hp, manufactured by BMW-MOTORSPORT GmbH. This iconic vehicle from the 3-Series was built in either Munich or Dingolfing, Germany. It falls under the Class 1 weight category and runs on gasoline.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3, produced by BMW M GmbH, is a classic 2-door coupe with a 2.3L engine delivering 192 horsepower. Manufactured in Munich or Dingolfing, Germany, this iconic model is part of the 3-Series and runs on gasoline. Its lightweight build falls under Class 1, with a gross vehicle weight rating of 6,000 lb or less.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M5 1988

The 1988 BMW M5 is a high-performance sedan powered by a 3.4L inline-six engine producing 256 hp, manufactured by BMW Motorsport GmbH. With four doors and a manual seat belt system, this member of the 5-Series promises both practicality and exhilaration. Built in Munich or Dingolfing, Germany, this classic M5 is a testament to BMW's engineering excellence.

Spec:

Engine Brake (hp) From

256

Engine Manufacturer

BMW-MOTORSPORT GmbH

Engine Number of Cylinders

Problems:

Oil leaks

The 1988 BMW M5, with its high-performance engine, is prone to oil leaks, particularly around the valve cover gasket and oil pan gasket.

Overheating

The cooling system may fail due to a faulty water pump, radiator, or thermostat, leading to engine overheating.

Timing chain issues

The timing chain tensioner can wear out, causing the chain to become loose and potentially leading to engine damage.

Fuel injector problems

Fuel injectors may become clogged or fail, leading to poor engine performance and reduced fuel efficiency.

Vacuum leaks

Vacuum hoses can deteriorate over time, resulting in vacuum leaks that cause rough idling and poor acceleration.

Ignition coil failures

The ignition coil can fail, leading to misfires and reduced engine performance.

Mass air flow sensor failure

The mass air flow sensor may fail, causing incorrect air-fuel mixture readings and poor engine performance.

BMW M5 1988

The 1988 BMW M5 is a classic sedan from the renowned BMW M GmbH, featuring a 3.4-liter inline-six engine delivering 256 horsepower. This four-door beauty, part of the 5-Series, was manufactured in Munich or Dingolfing, Germany. It runs on gasoline and falls within the Class 1 weight rating. A true icon of performance and luxury from the late '80s.

Spec:

Engine Brake (hp) From

256

Engine Manufacturer

BMW-MOTORSPORT GmbH

Engine Number of Cylinders

Problems:

Oil leaks

The 1988 BMW M5, with its high-performance engine, is prone to oil leaks, particularly around the valve cover gasket and oil pan gasket.

Overheating

The cooling system may fail due to a faulty water pump, radiator, or thermostat, leading to engine overheating.

Timing chain issues

The timing chain tensioner can wear out, causing the chain to become loose and potentially leading to engine damage.

Fuel injector problems

Fuel injectors may become clogged or fail, leading to poor engine performance and reduced fuel efficiency.

Vacuum leaks

Vacuum hoses can deteriorate over time, resulting in vacuum leaks that cause rough idling and poor acceleration.

Ignition coil failures

The ignition coil can fail, leading to misfires and reduced engine performance.

Mass air flow sensor failure

The mass air flow sensor may fail, causing incorrect air-fuel mixture readings and poor engine performance.

BMW M3 1988

The 1988 BMW M3 is a classic coupe from the renowned 3-Series, powered by a 2.3L engine delivering 192 horsepower. Manufactured by BMW M GmbH in Germany, this two-door sports car runs on gasoline and falls under the Class 1 weight rating. Its iconic design and performance make it a coveted model for enthusiasts.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 Coupe is a classic performance vehicle powered by a 2.3-liter engine producing 192 horsepower, courtesy of BMW-MOTORSPORT GmbH. This iconic 2-door car, part of the 3-Series, was manufactured by BMW M GMBH in Munich or Dingolfing, Germany. Designed for driving enthusiasts, it runs on gasoline and falls within the Class 1 weight rating.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic 2-door coupe powered by a 2.3L engine producing 192 horsepower, manufactured by BMW-MOTORSPORT GmbH. This iconic member of the 3-Series was built in Munich or Dingolfing, Germany, and runs on gasoline. With a sleek design and manual seat belts, it stays true to its performance roots.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M5 1988

The 1988 BMW M5 is a high-performance sedan crafted by BMW M GmbH. It features a 3.4L inline-six engine with 256 horsepower, designed by BMW-Motorsport GmbH. This classic model is part of the 5-Series and offers a luxurious yet sporty driving experience. Manufactured in Germany, it remains a beloved choice among car enthusiasts.

Spec:

Engine Brake (hp) From

256

Engine Manufacturer

BMW-MOTORSPORT GmbH

Engine Number of Cylinders

Problems:

Oil leaks

The 1988 BMW M5, with its high-performance engine, is prone to oil leaks, particularly around the valve cover gasket and oil pan gasket.

Overheating

The cooling system may fail due to a faulty water pump, radiator, or thermostat, leading to engine overheating.

Timing chain issues

The timing chain tensioner can wear out, causing the chain to become loose and potentially leading to engine damage.

Fuel injector problems

Fuel injectors may become clogged or fail, leading to poor engine performance and reduced fuel efficiency.

Vacuum leaks

Vacuum hoses can deteriorate over time, resulting in vacuum leaks that cause rough idling and poor acceleration.

Ignition coil failures

The ignition coil can fail, leading to misfires and reduced engine performance.

Mass air flow sensor failure

The mass air flow sensor may fail, causing incorrect air-fuel mixture readings and poor engine performance.

BMW M5 1988

The 1988 BMW M5 is a classic sedan powered by a robust 3.4L inline-six engine delivering 256 horsepower, crafted by BMW Motorsport GmbH. Manufactured in Germany, this 5-Series model combines performance and luxury, embodying BMW's engineering excellence. With its four-door design and manual seat belts, it offers both practicality and a thrilling driving experience.

Spec:

Engine Brake (hp) From

256

Engine Manufacturer

BMW-MOTORSPORT GmbH

Engine Number of Cylinders

Problems:

Oil leaks

The 1988 BMW M5, with its high-performance engine, is prone to oil leaks, particularly around the valve cover gasket and oil pan gasket.

Overheating

The cooling system may fail due to a faulty water pump, radiator, or thermostat, leading to engine overheating.

Timing chain issues

The timing chain tensioner can wear out, causing the chain to become loose and potentially leading to engine damage.

Fuel injector problems

Fuel injectors may become clogged or fail, leading to poor engine performance and reduced fuel efficiency.

Vacuum leaks

Vacuum hoses can deteriorate over time, resulting in vacuum leaks that cause rough idling and poor acceleration.

Ignition coil failures

The ignition coil can fail, leading to misfires and reduced engine performance.

Mass air flow sensor failure

The mass air flow sensor may fail, causing incorrect air-fuel mixture readings and poor engine performance.

BMW M5 1988

The 1988 BMW M5 is a classic sedan powered by a 3.4L inline-six engine producing 256 horsepower, crafted by BMW-MOTORSPORT GmbH. Manufactured in Germany, this 5-Series model delivers a high-performance experience with its gasoline engine and manual seat belts. With a weight rating under 6,000 lbs, it combines luxury and power in a beautifully engineered package.

Spec:

Engine Brake (hp) From

256

Engine Manufacturer

BMW-MOTORSPORT GmbH

Engine Number of Cylinders

Problems:

Oil leaks

The 1988 BMW M5, with its high-performance engine, is prone to oil leaks, particularly around the valve cover gasket and oil pan gasket.

Overheating

The cooling system may fail due to a faulty water pump, radiator, or thermostat, leading to engine overheating.

Timing chain issues

The timing chain tensioner can wear out, causing the chain to become loose and potentially leading to engine damage.

Fuel injector problems

Fuel injectors may become clogged or fail, leading to poor engine performance and reduced fuel efficiency.

Vacuum leaks

Vacuum hoses can deteriorate over time, resulting in vacuum leaks that cause rough idling and poor acceleration.

Ignition coil failures

The ignition coil can fail, leading to misfires and reduced engine performance.

Mass air flow sensor failure

The mass air flow sensor may fail, causing incorrect air-fuel mixture readings and poor engine performance.

BMW M5 1988

The 1988 BMW M5 is a classic sedan from the renowned BMW M GmbH, featuring a 3.4L inline-6 engine with 256 horsepower. Manufactured in Germany, this 5-Series model offers a blend of performance and luxury, making it a timeless icon. With four doors and a manual seat belt type, it's designed for both safety and comfort. Ideal for those who appreciate classic engineering and driving dynamics.

Spec:

Engine Brake (hp) From

256

Engine Manufacturer

BMW-MOTORSPORT GmbH

Engine Number of Cylinders

Problems:

Oil leaks

The 1988 BMW M5, with its high-performance engine, is prone to oil leaks, particularly around the valve cover gasket and oil pan gasket.

Overheating

The cooling system may fail due to a faulty water pump, radiator, or thermostat, leading to engine overheating.

Timing chain issues

The timing chain tensioner can wear out, causing the chain to become loose and potentially leading to engine damage.

Fuel injector problems

Fuel injectors may become clogged or fail, leading to poor engine performance and reduced fuel efficiency.

Vacuum leaks

Vacuum hoses can deteriorate over time, resulting in vacuum leaks that cause rough idling and poor acceleration.

Ignition coil failures

The ignition coil can fail, leading to misfires and reduced engine performance.

Mass air flow sensor failure

The mass air flow sensor may fail, causing incorrect air-fuel mixture readings and poor engine performance.

BMW M3 1988

The 1988 BMW M3 Coupe is a classic performance vehicle powered by a 2.3L engine producing 192 hp, crafted by BMW-MOTORSPORT GmbH. With its sleek 2-door design and engineered in Germany, this car is part of the iconic 3-Series. It offers a thrilling driving experience with its lightweight build and manual seat belts for a traditional feel.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic coupe powered by a 2.3L engine producing 192 horsepower, crafted by BMW-MOTORSPORT GmbH. This iconic model, part of the 3-Series, was manufactured in Germany, either in Munich or Dingolfing. With a 2-door design and a gross vehicle weight rating of up to 6,000 lbs, it remains a beloved choice for car enthusiasts.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.