Most Common Car Issues

Selected parameters

Add more parameters

MOST COMMON PROBLEMS

BMW M3 1988

The 1988 BMW M3 Coupe is a classic performance vehicle featuring a 2.3L engine producing 192 hp. Manufactured by BMW M GmbH in Germany, this iconic model is part of the 3-Series and designed for enthusiasts who appreciate precision engineering and sporty driving dynamics. With its lightweight body and manual seat belts, it's a quintessential example of 80s automotive excellence.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic coupe with a 2.3L engine producing 192 hp, crafted by BMW-MOTORSPORT GmbH. With a sleek 2-door design, it belongs to the 3-Series and was manufactured in Munich or Dingolfing, Germany. This iconic vehicle runs on gasoline and falls within the Class 1 weight category.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic 2-door coupe powered by a 2.3L engine producing 192 hp, manufactured by BMW-MOTORSPORT GmbH. This iconic vehicle from the 3-Series was built in either Munich or Dingolfing, Germany. It falls under the Class 1 weight category and runs on gasoline.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3, produced by BMW M GmbH, is a classic 2-door coupe with a 2.3L engine delivering 192 horsepower. Manufactured in Munich or Dingolfing, Germany, this iconic model is part of the 3-Series and runs on gasoline. Its lightweight build falls under Class 1, with a gross vehicle weight rating of 6,000 lb or less.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic coupe from the renowned 3-Series, powered by a 2.3L engine delivering 192 horsepower. Manufactured by BMW M GmbH in Germany, this two-door sports car runs on gasoline and falls under the Class 1 weight rating. Its iconic design and performance make it a coveted model for enthusiasts.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 Coupe is a classic performance vehicle powered by a 2.3-liter engine producing 192 horsepower, courtesy of BMW-MOTORSPORT GmbH. This iconic 2-door car, part of the 3-Series, was manufactured by BMW M GMBH in Munich or Dingolfing, Germany. Designed for driving enthusiasts, it runs on gasoline and falls within the Class 1 weight rating.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic 2-door coupe powered by a 2.3L engine producing 192 horsepower, manufactured by BMW-MOTORSPORT GmbH. This iconic member of the 3-Series was built in Munich or Dingolfing, Germany, and runs on gasoline. With a sleek design and manual seat belts, it stays true to its performance roots.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 Coupe is a classic performance vehicle powered by a 2.3L engine producing 192 hp, crafted by BMW-MOTORSPORT GmbH. With its sleek 2-door design and engineered in Germany, this car is part of the iconic 3-Series. It offers a thrilling driving experience with its lightweight build and manual seat belts for a traditional feel.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.

BMW M3 1988

The 1988 BMW M3 is a classic coupe powered by a 2.3L engine producing 192 horsepower, crafted by BMW-MOTORSPORT GmbH. This iconic model, part of the 3-Series, was manufactured in Germany, either in Munich or Dingolfing. With a 2-door design and a gross vehicle weight rating of up to 6,000 lbs, it remains a beloved choice for car enthusiasts.

Spec:

Engine Brake (hp) From

192

Engine Manufacturer

BMW-MOTORSPORT GmbH

Problems:

Oil leaks

Older BMW M3 models, such as the 1988 version, are prone to developing oil leaks around the valve cover gasket, oil pan gasket, or rear main seal.

Cooling system issues

The cooling system components, including the radiator, water pump, and thermostat, may fail or become less efficient over time, leading to overheating.

Timing chain wear

The timing chain and associated components can wear out, potentially leading to timing issues or engine damage if not addressed.

Fuel injector problems

The fuel injectors can become clogged or fail, which can cause poor engine performance or misfires.

Vacuum leaks

Vacuum hoses and connections may deteriorate, causing vacuum leaks that can lead to rough idling or poor fuel efficiency.

Crankshaft position sensor failure

Failure of the crankshaft position sensor can cause the engine to stall or not start.

Exhaust system corrosion

The exhaust system, including the catalytic converter and muffler, may rust or corrode, leading to exhaust leaks or reduced performance.

Ignition coil failure

Ignition coils can fail, leading to misfires, rough running, or difficulty starting the engine.