Most Common Car Issues
Add more parameters
MOST COMMON PROBLEMS
VOLVO 240 Series 1984
The 1984 Volvo 240 Series Wagon is a classic passenger car equipped with a 2.3L inline-4 engine (B230F) producing 116 hp. Manufactured by Volvo Car Corporation in Gothenburg, Sweden, it features a 3-point seat belt system and manual seat belts. Known for its durability and safety, this wagon offers a spacious 5-door configuration, making it a practical choice for families.
Spec:
Engine Brake (hp) From
116
Engine Configuration
In-Line
Engine Manufacturer
Volvo
Engine Model
B230F
Engine Number of Cylinders
4
Problems:
Oil leaks
The Volvo B230F engine, particularly in older models like the 1984 Volvo 240 Series, is known for developing oil leaks around the valve cover gasket, oil pan gasket, and rear main seal.
Timing belt failure
The B230F engine uses a rubber timing belt that requires regular maintenance. If not replaced at suggested intervals, it can break, causing significant engine damage.
Exhaust manifold cracks
Over time, the exhaust manifold on the B230F engine can develop cracks, leading to exhaust leaks and reduced engine performance.
Idle control valve issues
The idle control valve can become dirty or fail, causing erratic idling or stalling, which is a common issue in older Volvo 240 Series models.
Fuel pump failure
The in-tank fuel pump or main fuel pump can fail, leading to starting issues or engine stalling, a common problem in aging vehicles like the 1984 Volvo 240 Series.
Ignition system problems
Older Volvo 240 models may experience issues with the distributor, ignition coil, or spark plug wires, leading to misfires or hard starting.
Coolant leaks
The B230F engine may develop leaks in the radiator, water pump, or hoses, leading to overheating if not addressed promptly.
Air mass meter failure
The air mass meter (or mass airflow sensor) can fail, causing poor fuel economy, rough running, or stalling, which is a common issue in older vehicles.
Vacuum leaks
The various vacuum hoses and connections on the B230F engine can become brittle and leak over time, causing poor engine performance and fuel economy.