Most Common Car Issues

Selected parameters

Engine Model
L96

Add more parameters

MOST COMMON PROBLEMS

GMC Sierra 2010

The 2010 GMC Sierra SLE is a robust 4x4 pickup with a 6.0L V8 engine (GM L96) that can run on gasoline or E85. It features a hydraulic brake system, four doors, and is built in Flint, Michigan. This 3/4 ton truck is equipped with sequential fuel injection and offers front airbags for driver and passenger safety. The vehicle falls in the Class 2H weight category, capable of handling between 9,001 and 10,000 lbs.

Spec:

Brake System Type
Hydraulic
Engine Manufacturer
GM
Engine Model
L96
Engine Number of Cylinders
8
Other Engine Info
E85 MAX, IRON

Problems:

Brake fluid leaks
Hydraulic brake systems can suffer from leaks in the brake lines, which can lead to a loss of braking power and require immediate attention.
Worn brake pads
Over time, brake pads wear down and need to be replaced to maintain effective braking performance and avoid damage to the rotors.
Brake caliper issues
Brake calipers can seize or fail, leading to poor braking performance, uneven wear on brake pads, and potential safety hazards.
Abs sensor malfunction
The Anti-lock Braking System (ABS) sensors can fail or become dirty, causing warning lights to illuminate and potentially compromising the ABS functionality.
Engine misfires
The GM L96 engine can experience misfires due to issues like faulty spark plugs, ignition coils, or fuel injectors, which can lead to poor engine performance and reduced fuel efficiency.
Oil consumption
Some GM L96 engines are known to consume oil at higher rates, which can lead to low oil levels and potential engine damage if not monitored and addressed.
Transmission problems
The 2010 GMC Sierra may experience transmission issues such as hard shifting, slipping gears, or transmission fluid leaks, which can affect drivability and require repairs.
Fuel system issues
Problems with the fuel pump, fuel injectors, or fuel lines can lead to poor engine performance, stalling, or difficulty starting, especially with the E85 MAX fuel system.
Cooling system failures
Radiator, water pump, or thermostat failures can lead to overheating, which can cause significant engine damage if not promptly addressed.
Electrical problems
The 2010 GMC Sierra can suffer from various electrical issues, including faulty wiring, dead batteries, or malfunctioning alternators, which can affect multiple vehicle systems.
CHEVROLET Express 2010

The 2010 Chevrolet Express 3500 Cargo Van is powered by a robust 6.0L V8 engine (L96) with sequential fuel injection, capable of running on gasoline or ethanol (E85). Manufactured by General Motors in Wentzville, Missouri, this van features a hydraulic brake system, direct tire pressure monitoring, and manual seat belts. With a gross vehicle weight rating of 9,001 - 10,000 lbs, it's designed for heavy-duty cargo transport. The vehicle offers 4 doors and a 4x2 drive type, making it a practical choice for commercial use.

Spec:

Brake System Type
Hydraulic
Engine Manufacturer
GM
Engine Model
L96
Engine Number of Cylinders
8
Other Engine Info
E85 MAX, IRON

Problems:

Brake fluid leaks
Hydraulic brake systems can develop leaks in brake lines, hoses, or calipers, reducing braking efficiency and safety.
Brake pedal spongy or soft
Air trapped in the brake lines can cause a spongy or soft brake pedal, compromising brake performance.
Worn brake pads or rotors
Over time, brake pads and rotors wear down, which can lead to reduced braking power or squealing noises.
Abs (anti-lock braking system) malfunctions
Faulty ABS sensors or control modules can cause the ABS warning light to illuminate and potentially compromise braking in emergency situations.
Low brake fluid levels
A drop in brake fluid levels can indicate a leak or worn brake components, affecting braking performance.
Contaminated brake fluid
Over time, brake fluid can absorb moisture, reducing its effectiveness and potentially causing brake system corrosion.
Brake caliper sticking
Sticking brake calipers can cause uneven braking, pulling to one side, or increased brake wear.
Warped brake rotors
Excessive heat or heavy braking can warp brake rotors, leading to vibrations or pulsations when braking.
Brake warning light on
The brake warning light can indicate various issues, such as low brake fluid, worn brake pads, or ABS problems.
GMC Savana 2015

The 2015 GMC Savana 2500 Cargo Van is a robust rear-wheel-drive vehicle powered by a 6.0L V8 L96 engine. It features hydraulic brakes, sequential fuel injection, and can run on either gasoline or ethanol (E85). With a gross vehicle weight rating of 8,001 - 9,000 lbs, it's designed for heavy-duty tasks. Built in Wentzville, Missouri, this van offers three doors and essential safety features like front airbags for the driver and passenger.

Spec:

Brake System Type
Hydraulic
Engine Model
L96
Engine Number of Cylinders
8

Problems:

Brake fluid leaks
Hydraulic brake systems can develop leaks in hoses, lines, or at the master cylinder, resulting in reduced braking efficiency.
Brake pedal feels spongy
Air in the hydraulic brake lines can cause a spongy or soft brake pedal, reducing braking performance.
Worn brake pads or rotors
Over time, brake pads and rotors wear out and need to be replaced to maintain effective braking.
Abs warning light
The Anti-lock Braking System (ABS) may have sensor issues, electrical problems, or a malfunctioning ABS module.
Engine overheating
The L96 engine can experience overheating issues due to a failing thermostat, water pump, or clogged radiator.
Oil consumption
The L96 engine may consume oil, requiring frequent checks and top-ups.
Sensor failures
Various sensors, such as the oxygen sensor, camshaft position sensor, or crankshaft position sensor, can fail and affect engine performance.
Transmission issues
The transmission may experience problems such as slipping, rough shifting, or fluid leaks.
Fuel injector problems
Clogged or malfunctioning fuel injectors can lead to poor engine performance and reduced fuel efficiency.
Ignition coil failure
The ignition coils can wear out, leading to misfires and rough engine running.
Exhaust manifold leaks
The exhaust manifold can develop leaks, causing increased engine noise and potential exhaust fumes in the cabin.
Catalytic converter issues
The catalytic converter can become clogged or fail, leading to poor engine performance and increased emissions.
© Copyright 2024 VinCyp.com Privacy Policy
VIN Decoder (vincyp.com) does not guarantee the accuracy of provided information, including technical data, features, specifications, indicators, etc. All manufacturers' logos, brands, and trademarks are the property of their respective owners.