Common in engines, often due to worn gaskets or seals.

Can be caused by a faulty thermostat, low coolant levels, or a failing water pump.

Often due to issues with spark plugs, ignition coils, or fuel injectors.

Can result from clogged air filters, faulty oxygen sensors, or dirty fuel injectors.

Might be due to worn timing chains, loose components, or failing bearings.

Can be triggered by a variety of issues such as sensor failures, emission control problems, or engine misfires.

Often caused by a faulty fuel pump, dirty throttle body, or failing sensors.

Can be due to issues with the turbocharger, fuel system, or exhaust blockages.

Commonly caused by worn engine mounts, misfiring cylinders, or fuel system issues.

The 1992 Mazda MX-5 with the BPD engine may face overheating issues due to an aging cooling system or a failing thermostat.

Common in older models, oil leaks can occur from gaskets, seals, or the oil pan.

Worn spark plugs, ignition coils, or fuel injectors can cause the engine to misfire.

The timing belt may wear out or break, leading to severe engine damage if not replaced at recommended intervals.

An aging fuel pump may fail, leading to poor engine performance or starting problems.

Heat cycles can cause the exhaust manifold to crack, leading to exhaust leaks and reduced engine efficiency.

The gasket may degrade over time, causing oil leaks around the valve cover.

Engine may overheat due to cooling system issues or low coolant levels.

Common in inline-4 engines and can be caused by worn gaskets or seals.

Can lead to engine misfires, poor performance, or complete engine failure if not maintained.

May cause rough idling, poor acceleration, and decreased fuel efficiency.

Worn or faulty spark plugs can cause misfires and poor engine performance.

Can lead to oil leaks and engine misfires if not addressed.

Often due to engine mount failure or imbalance in the engine components.

Can affect engine performance and efficiency, common in direct injection engines.

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

Engine may overheat due to cooling system issues or low coolant levels.

Common in inline-4 engines and can be caused by worn gaskets or seals.

Can lead to engine misfires, poor performance, or complete engine failure if not maintained.

May cause rough idling, poor acceleration, and decreased fuel efficiency.

Worn or faulty spark plugs can cause misfires and poor engine performance.

Can lead to oil leaks and engine misfires if not addressed.

Often due to engine mount failure or imbalance in the engine components.

Can affect engine performance and efficiency, common in direct injection engines.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The 1994 Mazda MX-5, particularly with the BPD engine, is prone to oil leaks, often from the valve cover gasket or oil pan gasket.

The timing belt in the BPD engine may wear out or break if not replaced at regular intervals, leading to potential engine damage.

The cooling system, including the radiator and water pump, may develop leaks or fail, causing the engine to overheat.

Misfires or starting issues can occur due to faulty spark plugs, ignition coils, or the distributor.

Clogged or dirty fuel injectors can lead to poor engine performance and reduced fuel efficiency.

A faulty crankshaft position sensor can cause the engine to stall or not start at all.

The head gasket can fail, leading to coolant leaks and overheating issues.

Vacuum leaks can cause rough idling, poor acceleration, and decreased fuel economy.

Cracks in the exhaust manifold can lead to exhaust leaks and increased engine noise.

The system may not activate or may engage improperly, leading to reduced braking assistance during emergencies.

Misfires can occur due to various reasons, such as faulty spark plugs, ignition coils, or fuel injectors.

Common in older engines but can still happen in newer models due to gasket or seal failures.

Can be caused by a failing thermostat, water pump, or clogged radiator.

Timing chains or belts can stretch or break, leading to engine performance problems or catastrophic engine failure.

Includes issues such as clogged fuel injectors, a failing fuel pump, or a dirty fuel filter.

Engine performance may be impacted by malfunctioning sensors like the oxygen sensor, mass airflow sensor, or throttle position sensor.

Problems with the vehicle's electrical system can affect the engine's performance, including issues with the battery, alternator, or wiring.

Leaks or blockages in the exhaust system can lead to poor engine performance and increased emissions.

Turbochargers can fail due to oil starvation, bearing failure, or foreign object damage.

DBS may not activate correctly due to sensor or software issues, leading to reduced braking assistance in emergency situations.

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, leading to poor engine performance and increased emissions.

Common in many engines, oil leaks can be caused by worn-out seals or gaskets, leading to decreased engine lubrication and potential damage.

Overheating can occur due to a malfunctioning thermostat, water pump failure, or radiator issues, potentially causing severe engine damage.

The CEL can illuminate for various reasons including sensor failures, emissions system malfunctions, or other engine-related issues.

Problems with the timing chain or belt can lead to poor engine performance or catastrophic engine failure if not addressed.

Problems such as clogged fuel injectors, a faulty fuel pump, or a dirty fuel filter can affect engine performance and fuel efficiency.

The VVT system can develop problems due to solenoid failures, oil pressure issues, or actuator malfunctions, affecting engine performance.

Problems like a clogged catalytic converter or exhaust leaks can lead to reduced engine performance and increased emissions.

A dirty or faulty throttle body can cause poor engine response, stalling, or rough idling.

Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.

Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.

The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.

Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.

Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.

Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.

The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, which are common issues in in-line engines.

Gaskets and seals can wear out over time, leading to oil leaks. This is typical in engines that have been in use for a while.

Coolant leaks, a malfunctioning radiator, or a broken water pump can cause the engine to overheat.

The timing chain or belt can stretch or break, leading to poor engine performance or failure.

Clogged fuel injectors or a failing fuel pump can cause issues with fuel delivery, affecting engine performance.

Modern engines rely on various sensors (e.g., oxygen sensor, mass airflow sensor) that can fail and cause performance issues or trigger check engine lights.

Over time, components like camshafts, lifters, and valves can wear out, leading to reduced engine performance or noise.

Problems with the catalytic converter or exhaust manifold can result in increased emissions or reduced engine efficiency.

The 1994 Mazda MX-5, particularly with the BPD engine, is prone to oil leaks, often from the valve cover gasket or oil pan gasket.

The timing belt in the BPD engine may wear out or break if not replaced at regular intervals, leading to potential engine damage.

The cooling system, including the radiator and water pump, may develop leaks or fail, causing the engine to overheat.

Misfires or starting issues can occur due to faulty spark plugs, ignition coils, or the distributor.

Clogged or dirty fuel injectors can lead to poor engine performance and reduced fuel efficiency.

A faulty crankshaft position sensor can cause the engine to stall or not start at all.

The head gasket can fail, leading to coolant leaks and overheating issues.

Vacuum leaks can cause rough idling, poor acceleration, and decreased fuel economy.

Cracks in the exhaust manifold can lead to exhaust leaks and increased engine noise.

The system may not activate or may engage improperly, leading to reduced braking assistance during emergencies.

Misfires can occur due to various reasons, such as faulty spark plugs, ignition coils, or fuel injectors.

Common in older engines but can still happen in newer models due to gasket or seal failures.

Can be caused by a failing thermostat, water pump, or clogged radiator.

Timing chains or belts can stretch or break, leading to engine performance problems or catastrophic engine failure.

Includes issues such as clogged fuel injectors, a failing fuel pump, or a dirty fuel filter.

Engine performance may be impacted by malfunctioning sensors like the oxygen sensor, mass airflow sensor, or throttle position sensor.

Problems with the vehicle's electrical system can affect the engine's performance, including issues with the battery, alternator, or wiring.

Leaks or blockages in the exhaust system can lead to poor engine performance and increased emissions.

Turbochargers can fail due to oil starvation, bearing failure, or foreign object damage.

Gaskets and seals in older engines, such as the 1991 Mazda MX-5, can deteriorate over time, leading to oil leaks.

Cooling systems can become less efficient with age, and components like the radiator, water pump, or thermostat might fail, causing the engine to overheat.

The timing belt in the B6D engine needs regular replacement; if it fails, it can cause significant engine damage.

Over time, fuel injectors can become clogged, and the air-fuel mixture can be less than optimal, leading to reduced fuel efficiency.

Spark plugs, ignition wires, and coils can wear out, causing misfires and poor engine performance.

Hoses and gaskets can deteriorate, causing vacuum leaks that lead to rough idling and poor acceleration.

The exhaust manifold can develop cracks over time, leading to exhaust leaks and reduced engine performance.

The 1992 Mazda MX-5 with the BPD engine may face overheating issues due to an aging cooling system or a failing thermostat.

Common in older models, oil leaks can occur from gaskets, seals, or the oil pan.

Worn spark plugs, ignition coils, or fuel injectors can cause the engine to misfire.

The timing belt may wear out or break, leading to severe engine damage if not replaced at recommended intervals.

An aging fuel pump may fail, leading to poor engine performance or starting problems.

Heat cycles can cause the exhaust manifold to crack, leading to exhaust leaks and reduced engine efficiency.

The gasket may degrade over time, causing oil leaks around the valve cover.

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, which are common issues in in-line engines.

Gaskets and seals can wear out over time, leading to oil leaks. This is typical in engines that have been in use for a while.

Coolant leaks, a malfunctioning radiator, or a broken water pump can cause the engine to overheat.

The timing chain or belt can stretch or break, leading to poor engine performance or failure.

Clogged fuel injectors or a failing fuel pump can cause issues with fuel delivery, affecting engine performance.

Modern engines rely on various sensors (e.g., oxygen sensor, mass airflow sensor) that can fail and cause performance issues or trigger check engine lights.

Over time, components like camshafts, lifters, and valves can wear out, leading to reduced engine performance or noise.

Problems with the catalytic converter or exhaust manifold can result in increased emissions or reduced engine efficiency.

The 1994 Mazda MX-5, particularly with the BPD engine, is prone to oil leaks, often from the valve cover gasket or oil pan gasket.

The timing belt in the BPD engine may wear out or break if not replaced at regular intervals, leading to potential engine damage.

The cooling system, including the radiator and water pump, may develop leaks or fail, causing the engine to overheat.

Misfires or starting issues can occur due to faulty spark plugs, ignition coils, or the distributor.

Clogged or dirty fuel injectors can lead to poor engine performance and reduced fuel efficiency.

A faulty crankshaft position sensor can cause the engine to stall or not start at all.

The head gasket can fail, leading to coolant leaks and overheating issues.

Vacuum leaks can cause rough idling, poor acceleration, and decreased fuel economy.

Cracks in the exhaust manifold can lead to exhaust leaks and increased engine noise.

Over time, seals and gaskets can wear out, leading to oil leaks which can cause engine damage if not addressed.

The timing chain can become loose or worn, leading to poor engine performance or even engine failure.

Carbon can accumulate in the intake valves and other parts, affecting engine efficiency and performance.

Issues with the radiator, water pump, or hoses can lead to overheating and potential engine damage.

Clogged or malfunctioning fuel injectors can cause poor fuel economy and engine misfires.

The system may not activate or may engage improperly, leading to reduced braking assistance during emergencies.

Misfires can occur due to various reasons, such as faulty spark plugs, ignition coils, or fuel injectors.

Common in older engines but can still happen in newer models due to gasket or seal failures.

Can be caused by a failing thermostat, water pump, or clogged radiator.

Timing chains or belts can stretch or break, leading to engine performance problems or catastrophic engine failure.

Includes issues such as clogged fuel injectors, a failing fuel pump, or a dirty fuel filter.

Engine performance may be impacted by malfunctioning sensors like the oxygen sensor, mass airflow sensor, or throttle position sensor.

Problems with the vehicle's electrical system can affect the engine's performance, including issues with the battery, alternator, or wiring.

Leaks or blockages in the exhaust system can lead to poor engine performance and increased emissions.

Turbochargers can fail due to oil starvation, bearing failure, or foreign object damage.

Misfires can occur due to faulty spark plugs, ignition coils, or fuel injectors, which are common issues in in-line engines.

Gaskets and seals can wear out over time, leading to oil leaks. This is typical in engines that have been in use for a while.

Coolant leaks, a malfunctioning radiator, or a broken water pump can cause the engine to overheat.

The timing chain or belt can stretch or break, leading to poor engine performance or failure.

Clogged fuel injectors or a failing fuel pump can cause issues with fuel delivery, affecting engine performance.

Modern engines rely on various sensors (e.g., oxygen sensor, mass airflow sensor) that can fail and cause performance issues or trigger check engine lights.

Over time, components like camshafts, lifters, and valves can wear out, leading to reduced engine performance or noise.

Problems with the catalytic converter or exhaust manifold can result in increased emissions or reduced engine efficiency.

The system may not activate or may engage improperly, leading to reduced braking assistance during emergencies.

Misfires can occur due to various reasons, such as faulty spark plugs, ignition coils, or fuel injectors.

Common in older engines but can still happen in newer models due to gasket or seal failures.

Can be caused by a failing thermostat, water pump, or clogged radiator.

Timing chains or belts can stretch or break, leading to engine performance problems or catastrophic engine failure.

Includes issues such as clogged fuel injectors, a failing fuel pump, or a dirty fuel filter.

Engine performance may be impacted by malfunctioning sensors like the oxygen sensor, mass airflow sensor, or throttle position sensor.

Problems with the vehicle's electrical system can affect the engine's performance, including issues with the battery, alternator, or wiring.

Leaks or blockages in the exhaust system can lead to poor engine performance and increased emissions.

Turbochargers can fail due to oil starvation, bearing failure, or foreign object damage.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

Engine may overheat due to cooling system issues or low coolant levels.

Common in inline-4 engines and can be caused by worn gaskets or seals.

Can lead to engine misfires, poor performance, or complete engine failure if not maintained.

May cause rough idling, poor acceleration, and decreased fuel efficiency.

Worn or faulty spark plugs can cause misfires and poor engine performance.

Can lead to oil leaks and engine misfires if not addressed.

Often due to engine mount failure or imbalance in the engine components.

Can affect engine performance and efficiency, common in direct injection engines.

Engine may overheat due to cooling system issues or low coolant levels.

Common in inline-4 engines and can be caused by worn gaskets or seals.

Can lead to engine misfires, poor performance, or complete engine failure if not maintained.

May cause rough idling, poor acceleration, and decreased fuel efficiency.

Worn or faulty spark plugs can cause misfires and poor engine performance.

Can lead to oil leaks and engine misfires if not addressed.

Often due to engine mount failure or imbalance in the engine components.

Can affect engine performance and efficiency, common in direct injection engines.

The Mazda PE engine, like many inline-4 engines, can develop oil leaks over time, often from the valve cover gasket or oil pan.

The timing chain can stretch or wear out, leading to poor engine performance or even catastrophic failure if not addressed.

Direct injection engines, including some versions of the Mazda PE, can suffer from carbon buildup on intake valves, affecting performance and fuel efficiency.

Radiator or coolant hose leaks can occur, leading to overheating if not promptly repaired.

The ignition coils in the Mazda PE engine can fail, causing misfires, rough idling, and poor acceleration.

Dirty or faulty fuel injectors can lead to poor fuel economy, rough running, or starting issues.