Most Common Car Issues

Selected parameters

Make
BMW
Model
330xi

Add more parameters

MOST COMMON PROBLEMS

BMW 330xi 2003

The 2003 BMW 330xi is a stylish sedan equipped with a 6-cylinder engine producing 225 hp, designed for performance and comfort. Manufactured in Munich, Germany, this 4-door passenger car features a wheelbase of 107.3 inches and a gross vehicle weight rating up to 4,343 lbs. Ideal for those seeking a balance of luxury and power in their daily drive.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2003 BMW 330xi, like many older vehicles, can suffer from oil leaks due to worn gaskets, seals, or oil pan issues.
Cooling system failures
Common in this model, failures in the cooling system can include issues with the radiator, water pump, or thermostat, leading to overheating.
Vanos issues
The variable valve timing system (VANOS) in BMW engines can experience problems, resulting in rough idling, loss of power, and decreased fuel efficiency.
Crankcase ventilation system problems
The crankcase ventilation system can become clogged or fail, leading to increased oil consumption and potential engine performance issues.
Fuel pump failures
The fuel pump may fail or become less efficient over time, causing starting issues or poor engine performance.
Ignition coil problems
Faulty ignition coils can lead to misfires, rough running, and a decrease in overall engine performance.
BMW 330xi 2002

The 2002 BMW 330xi, manufactured by BMW AG in Regensburg, Germany, is a 4-door sedan powered by a 3.0-liter, 6-cylinder engine producing 225 hp. It features advanced dual-stage SRS airbags for the driver and passenger, runs on gasoline, and falls under the Class 1 weight rating. The 330xi is part of BMW's 3 Series lineup and offers a blend of performance and safety.

Spec:

Engine Brake (hp) From
225
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
Oil leaks are common in older BMWs, especially around the valve cover gasket, oil filter housing gasket, and oil pan gasket.
Cooling system failures
The cooling system in older BMWs, including the 2002 330xi, is prone to failures such as leaks from the radiator, water pump, and coolant expansion tank.
Vanos issues
The variable valve timing system, known as VANOS, can suffer from seal failures, leading to poor performance and rough idling.
Crankcase ventilation system problems
The crankcase ventilation (CCV) system can fail, causing oil consumption issues and vacuum leaks.
Ignition coil failures
Ignition coils can wear out, leading to misfires, rough running, and reduced engine performance.
Mass air flow (maf) sensor failure
The MAF sensor can become contaminated or fail, causing issues with engine performance and fuel economy.
Fuel pump and fuel filter problems
The fuel pump and fuel filter can wear out over time, leading to fuel delivery issues and engine performance problems.
Oxygen sensor failures
Oxygen sensors can fail, causing issues with fuel mixture and emissions, leading to poor engine performance.
BMW 330xi 2003

The 2003 BMW 330xi is a stylish and powerful sedan featuring a 225-hp, 6-cylinder engine. Built in Munich, Germany, this 4-door passenger car offers a comfortable ride with a wheelbase of 107.3 inches. It falls within the Class 1C weight category, making it a solid choice for performance and reliability.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2003 BMW 330xi, like many older vehicles, can suffer from oil leaks due to worn gaskets, seals, or oil pan issues.
Cooling system failures
Common in this model, failures in the cooling system can include issues with the radiator, water pump, or thermostat, leading to overheating.
Vanos issues
The variable valve timing system (VANOS) in BMW engines can experience problems, resulting in rough idling, loss of power, and decreased fuel efficiency.
Crankcase ventilation system problems
The crankcase ventilation system can become clogged or fail, leading to increased oil consumption and potential engine performance issues.
Fuel pump failures
The fuel pump may fail or become less efficient over time, causing starting issues or poor engine performance.
Ignition coil problems
Faulty ignition coils can lead to misfires, rough running, and a decrease in overall engine performance.
BMW 330xi 2006

The 2006 BMW 330xi is a luxury sedan equipped with a 3.0L inline-six engine, delivering 255 horsepower. Manufactured in Munich, Germany, this 3-Series model features advanced dual-stage airbags and a direct TPMS. With a GVWR of up to 4,729 lbs and a sleek design, it offers both performance and safety for discerning drivers.

Spec:

Engine Brake (hp) From
255
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2006 BMW 330xi often experiences oil leaks due to aging gaskets and seals, especially the valve cover gasket and oil filter housing gasket.
Cooling system issues
Problems with the cooling system, such as a failing water pump or radiator, are common and can lead to engine overheating.
Vanos system failure
The variable valve timing system (VANOS) can fail, causing rough idling, reduced power, and poor fuel economy.
Ignition coil failure
Faulty ignition coils can cause misfires, rough running, and a check engine light.
Crankcase ventilation (ccv) problems
The CCV system can fail, leading to oil consumption issues and potential vacuum leaks.
BMW 330xi 2003

The 2003 BMW 330xi is a 4-door sedan powered by a 225 hp, 6-cylinder gasoline engine. With a gross vehicle weight rating between 4,001 and 5,000 lbs, this vehicle combines performance and luxury. Manufactured in Munich, Germany, it boasts a wheelbase of 107.3 inches, ensuring a smooth ride.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2003 BMW 330xi, like many older vehicles, can suffer from oil leaks due to worn gaskets, seals, or oil pan issues.
Cooling system failures
Common in this model, failures in the cooling system can include issues with the radiator, water pump, or thermostat, leading to overheating.
Vanos issues
The variable valve timing system (VANOS) in BMW engines can experience problems, resulting in rough idling, loss of power, and decreased fuel efficiency.
Crankcase ventilation system problems
The crankcase ventilation system can become clogged or fail, leading to increased oil consumption and potential engine performance issues.
Fuel pump failures
The fuel pump may fail or become less efficient over time, causing starting issues or poor engine performance.
Ignition coil problems
Faulty ignition coils can lead to misfires, rough running, and a decrease in overall engine performance.
BMW 330xi 2002

The 2002 BMW 330xi is a refined sedan equipped with a powerful 3.0L inline-6 engine producing 225 hp. This all-wheel-drive saloon ensures safety with dual-stage advanced SRS airbags and manual seat belts. Manufactured in Regensburg, Germany, it embodies BMW's commitment to performance and luxury.

Spec:

Engine Brake (hp) From
225
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
Oil leaks are common in older BMWs, especially around the valve cover gasket, oil filter housing gasket, and oil pan gasket.
Cooling system failures
The cooling system in older BMWs, including the 2002 330xi, is prone to failures such as leaks from the radiator, water pump, and coolant expansion tank.
Vanos issues
The variable valve timing system, known as VANOS, can suffer from seal failures, leading to poor performance and rough idling.
Crankcase ventilation system problems
The crankcase ventilation (CCV) system can fail, causing oil consumption issues and vacuum leaks.
Ignition coil failures
Ignition coils can wear out, leading to misfires, rough running, and reduced engine performance.
Mass air flow (maf) sensor failure
The MAF sensor can become contaminated or fail, causing issues with engine performance and fuel economy.
Fuel pump and fuel filter problems
The fuel pump and fuel filter can wear out over time, leading to fuel delivery issues and engine performance problems.
Oxygen sensor failures
Oxygen sensors can fail, causing issues with fuel mixture and emissions, leading to poor engine performance.
BMW 330xi 2006

The 2006 BMW 330xi is a refined sedan with a 3.0L inline-6 engine producing 255 hp. It features a dual-stage SRS airbag system, TPMS, and manual seat belts for safety. Manufactured in Munich, Germany, it fits within the Class 1C weight category, making it a solid choice for a luxurious yet practical ride.

Spec:

Engine Brake (hp) From
255
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2006 BMW 330xi often experiences oil leaks due to aging gaskets and seals, especially the valve cover gasket and oil filter housing gasket.
Cooling system issues
Problems with the cooling system, such as a failing water pump or radiator, are common and can lead to engine overheating.
Vanos system failure
The variable valve timing system (VANOS) can fail, causing rough idling, reduced power, and poor fuel economy.
Ignition coil failure
Faulty ignition coils can cause misfires, rough running, and a check engine light.
Crankcase ventilation (ccv) problems
The CCV system can fail, leading to oil consumption issues and potential vacuum leaks.
BMW 330xi 2004

The 2004 BMW 330xi is a refined sedan featuring a 3.0L inline-six engine producing 225 hp. Manufactured in Regensburg, Germany, it belongs to the 3-Series and offers advanced safety with dual-stage airbags and manual seat belts. This gasoline-powered vehicle is engineered for both performance and comfort.

Spec:

Engine Brake (hp) From
225
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
BMW engines, particularly older models, are prone to oil leaks from valve cover gaskets, oil filter housing gaskets, and oil pan gaskets.
Cooling system issues
The cooling systems in BMWs can be problematic, often involving radiator, water pump, or thermostat failures, leading to overheating.
Vanos system problems
The Variable Valve Timing (VANOS) system in BMWs often faces issues, including solenoid failures or issues with the VANOS seals, affecting engine performance.
Crankcase ventilation system
The Crankcase Ventilation (CCV) system can fail, causing oil consumption issues and potentially leading to engine damage.
Fuel injector problems
Fuel injectors can become clogged or fail, leading to poor engine performance, rough idling, and reduced fuel efficiency.
Ignition coil failures
Ignition coils may fail over time, causing misfires, rough running, and poor acceleration.
Timing chain wear
Timing chains and their associated components can wear out, leading to noisy operation and, in severe cases, engine failure if not addressed.
Intake manifold gasket leaks
The intake manifold gaskets can deteriorate over time, causing vacuum leaks and reducing engine performance.
BMW 330xi 2006

The 2006 BMW 330xi is a sedan equipped with a 3.0L inline-six engine producing 255 horsepower. It features a dual-stage supplemental restraint system, direct TPMS, and manual seat belts. Manufactured in Munich, Germany, this model belongs to the 3-Series and has a wheelbase of 108.7 inches. With a gross vehicle weight rating up to 4,729 lbs, it offers a balance of performance and safety.

Spec:

Engine Brake (hp) From
255
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2006 BMW 330xi often experiences oil leaks due to aging gaskets and seals, especially the valve cover gasket and oil filter housing gasket.
Cooling system issues
Problems with the cooling system, such as a failing water pump or radiator, are common and can lead to engine overheating.
Vanos system failure
The variable valve timing system (VANOS) can fail, causing rough idling, reduced power, and poor fuel economy.
Ignition coil failure
Faulty ignition coils can cause misfires, rough running, and a check engine light.
Crankcase ventilation (ccv) problems
The CCV system can fail, leading to oil consumption issues and potential vacuum leaks.
BMW 330xi 2003

The 2003 BMW 330xi is a 4-door sedan powered by a 225 hp, 6-cylinder gasoline engine. With a gross vehicle weight rating between 4,001 and 5,000 lbs, this model is manufactured by BMW AG in Munich, Germany. The vehicle boasts a wheelbase of 107.3 inches and is designed for a comfortable and dynamic driving experience.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2003 BMW 330xi, like many older vehicles, can suffer from oil leaks due to worn gaskets, seals, or oil pan issues.
Cooling system failures
Common in this model, failures in the cooling system can include issues with the radiator, water pump, or thermostat, leading to overheating.
Vanos issues
The variable valve timing system (VANOS) in BMW engines can experience problems, resulting in rough idling, loss of power, and decreased fuel efficiency.
Crankcase ventilation system problems
The crankcase ventilation system can become clogged or fail, leading to increased oil consumption and potential engine performance issues.
Fuel pump failures
The fuel pump may fail or become less efficient over time, causing starting issues or poor engine performance.
Ignition coil problems
Faulty ignition coils can lead to misfires, rough running, and a decrease in overall engine performance.
BMW 330xi 2003

The 2003 BMW 330xi is a 4-door sedan powered by a robust 6-cylinder engine delivering 225 horsepower. Manufactured in Munich, Germany, this model offers a luxurious and balanced driving experience. With a gross vehicle weight rating between 4,001 and 5,000 lbs, it's designed for both performance and comfort. The 330xi combines BMW's engineering excellence with a spacious and elegant design.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2003 BMW 330xi, like many older vehicles, can suffer from oil leaks due to worn gaskets, seals, or oil pan issues.
Cooling system failures
Common in this model, failures in the cooling system can include issues with the radiator, water pump, or thermostat, leading to overheating.
Vanos issues
The variable valve timing system (VANOS) in BMW engines can experience problems, resulting in rough idling, loss of power, and decreased fuel efficiency.
Crankcase ventilation system problems
The crankcase ventilation system can become clogged or fail, leading to increased oil consumption and potential engine performance issues.
Fuel pump failures
The fuel pump may fail or become less efficient over time, causing starting issues or poor engine performance.
Ignition coil problems
Faulty ignition coils can lead to misfires, rough running, and a decrease in overall engine performance.
BMW 330xi 2003

The 2003 BMW 330xi is a 4-door sedan powered by a 225 hp, 6-cylinder gasoline engine. Manufactured in Munich, Germany, it features a gross vehicle weight rating between 4,001 and 5,000 lbs. With a wheelbase of 107.3 inches and dimensions of 176 inches in length, 68.5 inches in width, and 55.7 inches in height, this passenger car offers a balanced blend of performance and luxury.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2003 BMW 330xi, like many older vehicles, can suffer from oil leaks due to worn gaskets, seals, or oil pan issues.
Cooling system failures
Common in this model, failures in the cooling system can include issues with the radiator, water pump, or thermostat, leading to overheating.
Vanos issues
The variable valve timing system (VANOS) in BMW engines can experience problems, resulting in rough idling, loss of power, and decreased fuel efficiency.
Crankcase ventilation system problems
The crankcase ventilation system can become clogged or fail, leading to increased oil consumption and potential engine performance issues.
Fuel pump failures
The fuel pump may fail or become less efficient over time, causing starting issues or poor engine performance.
Ignition coil problems
Faulty ignition coils can lead to misfires, rough running, and a decrease in overall engine performance.
BMW 330xi 2003

The 2003 BMW 330xi is a 4-door sedan powered by a 225 hp, 6-cylinder gasoline engine. With a wheelbase of 107.3 inches and a weight range from 4,001 to 5,000 lbs, this Munich-built passenger car offers a blend of performance and German engineering.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2003 BMW 330xi, like many older vehicles, can suffer from oil leaks due to worn gaskets, seals, or oil pan issues.
Cooling system failures
Common in this model, failures in the cooling system can include issues with the radiator, water pump, or thermostat, leading to overheating.
Vanos issues
The variable valve timing system (VANOS) in BMW engines can experience problems, resulting in rough idling, loss of power, and decreased fuel efficiency.
Crankcase ventilation system problems
The crankcase ventilation system can become clogged or fail, leading to increased oil consumption and potential engine performance issues.
Fuel pump failures
The fuel pump may fail or become less efficient over time, causing starting issues or poor engine performance.
Ignition coil problems
Faulty ignition coils can lead to misfires, rough running, and a decrease in overall engine performance.
BMW 330xi 2005

The 2005 BMW 330xi Sedan is a luxurious and dynamic vehicle, powered by a robust 3.0L inline-6 engine delivering 225 hp. Built in Regensburg, Germany, it features advanced safety systems including dual-stage airbags and a manual seat belt system. With a curb weight of around 3,500 lbs and a GVWR up to 4,597 lbs, this 3-Series model ensures a comfortable and secure driving experience.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2005 BMW 330xi is known for developing oil leaks from the valve cover gasket, oil filter housing gasket, and oil pan gasket.
Cooling system failures
Common issues include failed water pumps, thermostats, and radiators, leading to overheating.
Vanos system problems
The variable valve timing system (VANOS) may experience issues such as rattling noises and reduced performance.
Crankcase ventilation system issues
The crankcase ventilation system, including the oil separator, can fail, causing oil consumption and vacuum leaks.
Ignition coil failures
The ignition coils are prone to failure, which can cause misfires and poor engine performance.
Mass air flow sensor (maf) failures
The MAF sensor can become dirty or fail, resulting in rough idling, stalling, and reduced fuel efficiency.
Fuel pump failures
The fuel pump may fail, causing the engine to stall or not start at all.
Oxygen sensor failures
Faulty oxygen sensors can lead to poor fuel economy and increased emissions.
Serpentine belt and tensioner issues
The serpentine belt and tensioner can wear out, leading to squeaking noises and potential failure.
Intake boot cracks
The rubber intake boot can develop cracks, leading to vacuum leaks and poor engine performance.
BMW 330xi 2003

The 2003 BMW 330xi is a 4-door sedan powered by a 6-cylinder engine producing 225 hp. This gasoline-fueled vehicle, manufactured by BMW AG in Munich, Germany, falls within the Class 1C weight rating. With a wheelbase of 107.3 inches, it offers a blend of performance and luxury typical of BMW sedans.

Spec:

Engine Brake (hp) From
225
Engine Number of Cylinders
6

Problems:

Oil leaks
The 2003 BMW 330xi, like many older vehicles, can suffer from oil leaks due to worn gaskets, seals, or oil pan issues.
Cooling system failures
Common in this model, failures in the cooling system can include issues with the radiator, water pump, or thermostat, leading to overheating.
Vanos issues
The variable valve timing system (VANOS) in BMW engines can experience problems, resulting in rough idling, loss of power, and decreased fuel efficiency.
Crankcase ventilation system problems
The crankcase ventilation system can become clogged or fail, leading to increased oil consumption and potential engine performance issues.
Fuel pump failures
The fuel pump may fail or become less efficient over time, causing starting issues or poor engine performance.
Ignition coil problems
Faulty ignition coils can lead to misfires, rough running, and a decrease in overall engine performance.
© Copyright 2024 VinCyp.com Privacy Policy
VIN Decoder (vincyp.com) does not guarantee the accuracy of provided information, including technical data, features, specifications, indicators, etc. All manufacturers' logos, brands, and trademarks are the property of their respective owners.