Most Common Car Issues
Add more parameters
MOST COMMON PROBLEMS
CHEVROLET SSR 2004
The 2004 Chevrolet SSR is a unique pickup truck known for its retro-inspired design and convertible roof. Powered by a 5.3-liter V8 engine from GM, it uses Sequential Fuel Injection (SFI) and features a 4x2 drive type. With a two-door configuration and a weight rating of Class 2E, this vehicle combines style with the practicality of a half-ton truck. Produced in Maryland, USA, it showcases American automotive craftsmanship.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LM4
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to reduced braking efficiency.
Brake pad wear
Over time, brake pads wear down and need replacement to maintain effective braking performance.
Brake rotor warping
Excessive heat or improper braking can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Oil consumption
The GM LM4 engine may experience higher oil consumption, which can lead to low oil levels and potential engine damage if not monitored.
Lifter noise
V-shaped engines, particularly GM's LM4, can develop lifter noise over time due to wear and tear on the valvetrain components.
Intake manifold gasket leaks
The 2004 Chevrolet SSR with an LM4 engine may experience intake manifold gasket leaks, leading to coolant or vacuum leaks.
Coolant leaks
The aluminum components of the engine can develop leaks over time, particularly around the water pump or thermostat housing.
Timing chain wear
Over time, the timing chain can stretch or wear, leading to potential issues with engine timing and performance.
Fuel injector issues
Clogged or malfunctioning fuel injectors can cause poor engine performance, misfires, and reduced fuel efficiency.
Throttle body issues
The throttle body can become dirty or malfunction, leading to erratic idling or poor throttle response.
CHEVROLET SSR 2005
The 2005 Chevrolet SSR is a 2-door pickup truck powered by a 6.0L V8 engine (GM LS2) with sequential fuel injection. It features a hydraulic brake system, 4x2 drive type, and an overhead valve (OHV) design. Built by General Motors in Maryland, this Class 2E truck weighs between 6,001 and 7,000 pounds.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LS2
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Braking issues
Hydraulic brake systems can develop leaks in the brake lines, leading to reduced braking efficiency or complete brake failure. Regular inspection of brake fluid levels and brake lines is crucial.
Oil consumption
GM LS2 engines are known to have higher oil consumption, which can lead to engine wear if not monitored and maintained properly.
Cooling system problems
The V-shaped configuration of the LS2 engine can sometimes lead to uneven cooling, which may cause overheating issues, especially if the cooling system is not adequately maintained.
Electrical problems
The 2005 Chevrolet SSR can experience issues with its electrical system, including problems with the alternator, battery, or wiring harness, which can affect engine performance and reliability.
Timing chain wear
Over time, the timing chain in the LS2 engine may stretch or wear out, leading to timing issues, rough idling, or even engine failure if not replaced in a timely manner.
Fuel system contamination
Contaminants in the fuel system can cause poor engine performance, misfires, or even damage to the fuel injectors and engine components.
Intake manifold leaks
The LS2 engine's aluminum intake manifold can develop leaks over time, leading to vacuum leaks, rough idling, or decreased engine performance.
Sensor failures
Common sensor failures in the LS2 engine include the Mass Air Flow (MAF) sensor, Oxygen (O2) sensors, and throttle position sensors, which can lead to poor engine performance and fuel economy.
Exhaust manifold cracks
V-shaped engines like the LS2 are prone to developing cracks in the exhaust manifold, which can cause exhaust leaks, increased emissions, and decreased engine performance.
CHEVROLET SSR 2004
The 2004 Chevrolet SSR is a unique pickup with a 5.3L V8 engine, delivering robust performance and a nostalgic design. Built by General Motors in Maryland, this 2-door, 4x2 truck features Sequential Fuel Injection (SFI) and falls under the Class 2E weight category. Ideal for those who appreciate a blend of modern engineering and classic style.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LM4
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to reduced braking efficiency.
Brake pad wear
Over time, brake pads wear down and need replacement to maintain effective braking performance.
Brake rotor warping
Excessive heat or improper braking can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Oil consumption
The GM LM4 engine may experience higher oil consumption, which can lead to low oil levels and potential engine damage if not monitored.
Lifter noise
V-shaped engines, particularly GM's LM4, can develop lifter noise over time due to wear and tear on the valvetrain components.
Intake manifold gasket leaks
The 2004 Chevrolet SSR with an LM4 engine may experience intake manifold gasket leaks, leading to coolant or vacuum leaks.
Coolant leaks
The aluminum components of the engine can develop leaks over time, particularly around the water pump or thermostat housing.
Timing chain wear
Over time, the timing chain can stretch or wear, leading to potential issues with engine timing and performance.
Fuel injector issues
Clogged or malfunctioning fuel injectors can cause poor engine performance, misfires, and reduced fuel efficiency.
Throttle body issues
The throttle body can become dirty or malfunction, leading to erratic idling or poor throttle response.
CHEVROLET SSR 2005
The 2005 CHEVROLET SSR is a 2-door pickup truck powered by a robust 6.0L V8 LS2 engine from GM, utilizing Sequential Fuel Injection (SFI). It features a hydraulic brake system and is driven by a 4x2 drivetrain. Manufactured in the United States at the GM Truck Group's Maryland plant, this half-ton pickup has a Class 2E Gross Vehicle Weight Rating and is equipped with a Direct Tire Pressure Monitoring System.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LS2
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Braking issues
Hydraulic brake systems can develop leaks in the brake lines, leading to reduced braking efficiency or complete brake failure. Regular inspection of brake fluid levels and brake lines is crucial.
Oil consumption
GM LS2 engines are known to have higher oil consumption, which can lead to engine wear if not monitored and maintained properly.
Cooling system problems
The V-shaped configuration of the LS2 engine can sometimes lead to uneven cooling, which may cause overheating issues, especially if the cooling system is not adequately maintained.
Electrical problems
The 2005 Chevrolet SSR can experience issues with its electrical system, including problems with the alternator, battery, or wiring harness, which can affect engine performance and reliability.
Timing chain wear
Over time, the timing chain in the LS2 engine may stretch or wear out, leading to timing issues, rough idling, or even engine failure if not replaced in a timely manner.
Fuel system contamination
Contaminants in the fuel system can cause poor engine performance, misfires, or even damage to the fuel injectors and engine components.
Intake manifold leaks
The LS2 engine's aluminum intake manifold can develop leaks over time, leading to vacuum leaks, rough idling, or decreased engine performance.
Sensor failures
Common sensor failures in the LS2 engine include the Mass Air Flow (MAF) sensor, Oxygen (O2) sensors, and throttle position sensors, which can lead to poor engine performance and fuel economy.
Exhaust manifold cracks
V-shaped engines like the LS2 are prone to developing cracks in the exhaust manifold, which can cause exhaust leaks, increased emissions, and decreased engine performance.
CHEVROLET SSR 2005
The 2005 CHEVROLET SSR is a unique 2-door pickup truck with a powerful 6.0L V8 engine (GM LS2) delivering robust performance through Sequential Fuel Injection (SFI). Built in the USA, this Class 2E truck offers a 4x2 drive type and features a hydraulic brake system. With a distinctive design and a gross vehicle weight rating of 6,001 - 7,000 lbs, it's a blend of style and utility.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LS2
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Braking issues
Hydraulic brake systems can develop leaks in the brake lines, leading to reduced braking efficiency or complete brake failure. Regular inspection of brake fluid levels and brake lines is crucial.
Oil consumption
GM LS2 engines are known to have higher oil consumption, which can lead to engine wear if not monitored and maintained properly.
Cooling system problems
The V-shaped configuration of the LS2 engine can sometimes lead to uneven cooling, which may cause overheating issues, especially if the cooling system is not adequately maintained.
Electrical problems
The 2005 Chevrolet SSR can experience issues with its electrical system, including problems with the alternator, battery, or wiring harness, which can affect engine performance and reliability.
Timing chain wear
Over time, the timing chain in the LS2 engine may stretch or wear out, leading to timing issues, rough idling, or even engine failure if not replaced in a timely manner.
Fuel system contamination
Contaminants in the fuel system can cause poor engine performance, misfires, or even damage to the fuel injectors and engine components.
Intake manifold leaks
The LS2 engine's aluminum intake manifold can develop leaks over time, leading to vacuum leaks, rough idling, or decreased engine performance.
Sensor failures
Common sensor failures in the LS2 engine include the Mass Air Flow (MAF) sensor, Oxygen (O2) sensors, and throttle position sensors, which can lead to poor engine performance and fuel economy.
Exhaust manifold cracks
V-shaped engines like the LS2 are prone to developing cracks in the exhaust manifold, which can cause exhaust leaks, increased emissions, and decreased engine performance.
CHEVROLET SSR 2005
The 2005 Chevrolet SSR is a unique 2-door pickup truck powered by a robust 6.0L V8 LS2 engine from GM. With a gross vehicle weight rating of Class 2E, it features a sequential fuel injection system and operates on gasoline. The SSR is built in the United States, specifically at GM's Baltimore/Lansing Craft Center, and offers a stylish yet powerful driving experience.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LS2
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Braking issues
Hydraulic brake systems can develop leaks in the brake lines, leading to reduced braking efficiency or complete brake failure. Regular inspection of brake fluid levels and brake lines is crucial.
Oil consumption
GM LS2 engines are known to have higher oil consumption, which can lead to engine wear if not monitored and maintained properly.
Cooling system problems
The V-shaped configuration of the LS2 engine can sometimes lead to uneven cooling, which may cause overheating issues, especially if the cooling system is not adequately maintained.
Electrical problems
The 2005 Chevrolet SSR can experience issues with its electrical system, including problems with the alternator, battery, or wiring harness, which can affect engine performance and reliability.
Timing chain wear
Over time, the timing chain in the LS2 engine may stretch or wear out, leading to timing issues, rough idling, or even engine failure if not replaced in a timely manner.
Fuel system contamination
Contaminants in the fuel system can cause poor engine performance, misfires, or even damage to the fuel injectors and engine components.
Intake manifold leaks
The LS2 engine's aluminum intake manifold can develop leaks over time, leading to vacuum leaks, rough idling, or decreased engine performance.
Sensor failures
Common sensor failures in the LS2 engine include the Mass Air Flow (MAF) sensor, Oxygen (O2) sensors, and throttle position sensors, which can lead to poor engine performance and fuel economy.
Exhaust manifold cracks
V-shaped engines like the LS2 are prone to developing cracks in the exhaust manifold, which can cause exhaust leaks, increased emissions, and decreased engine performance.
CHEVROLET SSR 2004
The 2004 CHEVROLET SSR is a unique 1/2 ton pickup truck with a V-shaped 5.3L LM4 engine, featuring sequential fuel injection. Manufactured by General Motors in Maryland, this model boasts 8 cylinders and a 4x2 drive type. With a gross vehicle weight rating from Class 2E, it is built for both performance and style.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LM4
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to reduced braking efficiency.
Brake pad wear
Over time, brake pads wear down and need replacement to maintain effective braking performance.
Brake rotor warping
Excessive heat or improper braking can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Oil consumption
The GM LM4 engine may experience higher oil consumption, which can lead to low oil levels and potential engine damage if not monitored.
Lifter noise
V-shaped engines, particularly GM's LM4, can develop lifter noise over time due to wear and tear on the valvetrain components.
Intake manifold gasket leaks
The 2004 Chevrolet SSR with an LM4 engine may experience intake manifold gasket leaks, leading to coolant or vacuum leaks.
Coolant leaks
The aluminum components of the engine can develop leaks over time, particularly around the water pump or thermostat housing.
Timing chain wear
Over time, the timing chain can stretch or wear, leading to potential issues with engine timing and performance.
Fuel injector issues
Clogged or malfunctioning fuel injectors can cause poor engine performance, misfires, and reduced fuel efficiency.
Throttle body issues
The throttle body can become dirty or malfunction, leading to erratic idling or poor throttle response.
CHEVROLET SSR 2006
The 2006 Chevrolet SSR is a unique 2-door pickup truck with a powerful 6.0L V8 engine (GM LFC/LS2) and sequential fuel injection. Manufactured by General Motors in Lansing, Michigan, this 4x2 truck features a hydraulic brake system and falls into the Class 2E weight category. It combines the practicality of a pickup with the style and performance of a sports car.
Spec:
Brake System Type
Hydraulic
Engine Manufacturer
GM
Engine Model
LFC/LS2
Engine Number of Cylinders
8
Other Engine Info
Aluminium
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in brake lines, hoses, or calipers, leading to reduced braking efficiency.
Brake pedal feels spongy
Air in the hydraulic lines or worn brake components can cause a spongy brake pedal feel.
Worn brake pads or rotors
Brake pads and rotors wear out over time, leading to decreased stopping power and potential brake noise.
Abs (anti-lock braking system) issues
Faulty ABS sensors or control modules can cause the ABS light to illuminate and affect braking performance.
Overheating engine
Aluminium engines, like the GM LFC/LS2, can be prone to overheating if the cooling system is not properly maintained.
Oil leaks
Common in older engines, oil leaks can occur from gaskets, seals, or the oil pan.
Ignition coil failure
V8 engines, such as the GM LFC/LS2, can experience ignition coil failures, leading to misfires and rough running.
Fuel injector problems
Dirty or failing fuel injectors can cause poor engine performance and reduced fuel efficiency.
Timing chain wear
Over time, the timing chain can stretch or wear out, affecting engine timing and performance.
Throttle body issues
Carbon buildup in the throttle body can cause poor throttle response and reduced engine performance.
Transmission problems
The CHEVROLET SSR is known to have issues with its automatic transmission, including slipping and hard shifts.
Suspension wear
Components such as bushings, shocks, and struts can wear out, leading to a rough ride and poor handling.
Electrical issues
The SSR can experience problems with its electrical system, including faulty wiring and failing sensors.
CHEVROLET SSR 2004
The 2004 Chevrolet SSR is a unique 2-door pickup featuring a robust 5.3L V8 engine with sequential fuel injection. Manufactured by General Motors in Maryland, this 1/2 ton truck offers a 4x2 drive type and has a gross vehicle weight rating of Class 2E. With its hydraulic brake system and unique V-shaped engine configuration, the SSR stands out as a blend of performance and style.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LM4
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to reduced braking efficiency.
Brake pad wear
Over time, brake pads wear down and need replacement to maintain effective braking performance.
Brake rotor warping
Excessive heat or improper braking can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Oil consumption
The GM LM4 engine may experience higher oil consumption, which can lead to low oil levels and potential engine damage if not monitored.
Lifter noise
V-shaped engines, particularly GM's LM4, can develop lifter noise over time due to wear and tear on the valvetrain components.
Intake manifold gasket leaks
The 2004 Chevrolet SSR with an LM4 engine may experience intake manifold gasket leaks, leading to coolant or vacuum leaks.
Coolant leaks
The aluminum components of the engine can develop leaks over time, particularly around the water pump or thermostat housing.
Timing chain wear
Over time, the timing chain can stretch or wear, leading to potential issues with engine timing and performance.
Fuel injector issues
Clogged or malfunctioning fuel injectors can cause poor engine performance, misfires, and reduced fuel efficiency.
Throttle body issues
The throttle body can become dirty or malfunction, leading to erratic idling or poor throttle response.
CHEVROLET SSR 2004
The 2004 Chevrolet SSR is a unique pickup truck featuring a V-shaped, 8-cylinder GM LM4 engine with a 5.3L displacement and sequential fuel injection. With a sleek 2-door design, this Class 2E truck offers rear-wheel drive (4x2) and a gross vehicle weight rating between 6,001 and 7,000 lbs. Manufactured by General Motors LLC in the USA, this model combines utility with the flair of a convertible roadster.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LM4
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to reduced braking efficiency.
Brake pad wear
Over time, brake pads wear down and need replacement to maintain effective braking performance.
Brake rotor warping
Excessive heat or improper braking can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Oil consumption
The GM LM4 engine may experience higher oil consumption, which can lead to low oil levels and potential engine damage if not monitored.
Lifter noise
V-shaped engines, particularly GM's LM4, can develop lifter noise over time due to wear and tear on the valvetrain components.
Intake manifold gasket leaks
The 2004 Chevrolet SSR with an LM4 engine may experience intake manifold gasket leaks, leading to coolant or vacuum leaks.
Coolant leaks
The aluminum components of the engine can develop leaks over time, particularly around the water pump or thermostat housing.
Timing chain wear
Over time, the timing chain can stretch or wear, leading to potential issues with engine timing and performance.
Fuel injector issues
Clogged or malfunctioning fuel injectors can cause poor engine performance, misfires, and reduced fuel efficiency.
Throttle body issues
The throttle body can become dirty or malfunction, leading to erratic idling or poor throttle response.
CHEVROLET SSR 2005
The 2005 Chevrolet SSR is a unique 2-door pickup truck powered by a robust 6.0L V8 LS2 engine from GM. With a hydraulic brake system and 4x2 drive type, this Class 2E vehicle offers a blend of performance and utility. Built in the GM Truck Group plant in Baltimore, Maryland, it features sequential fuel injection and overhead valve design for efficient fuel delivery. Ideal for those seeking a stylish yet functional pickup.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LS2
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Braking issues
Hydraulic brake systems can develop leaks in the brake lines, leading to reduced braking efficiency or complete brake failure. Regular inspection of brake fluid levels and brake lines is crucial.
Oil consumption
GM LS2 engines are known to have higher oil consumption, which can lead to engine wear if not monitored and maintained properly.
Cooling system problems
The V-shaped configuration of the LS2 engine can sometimes lead to uneven cooling, which may cause overheating issues, especially if the cooling system is not adequately maintained.
Electrical problems
The 2005 Chevrolet SSR can experience issues with its electrical system, including problems with the alternator, battery, or wiring harness, which can affect engine performance and reliability.
Timing chain wear
Over time, the timing chain in the LS2 engine may stretch or wear out, leading to timing issues, rough idling, or even engine failure if not replaced in a timely manner.
Fuel system contamination
Contaminants in the fuel system can cause poor engine performance, misfires, or even damage to the fuel injectors and engine components.
Intake manifold leaks
The LS2 engine's aluminum intake manifold can develop leaks over time, leading to vacuum leaks, rough idling, or decreased engine performance.
Sensor failures
Common sensor failures in the LS2 engine include the Mass Air Flow (MAF) sensor, Oxygen (O2) sensors, and throttle position sensors, which can lead to poor engine performance and fuel economy.
Exhaust manifold cracks
V-shaped engines like the LS2 are prone to developing cracks in the exhaust manifold, which can cause exhaust leaks, increased emissions, and decreased engine performance.
CHEVROLET SSR 2004
The 2004 Chevrolet SSR is a unique 2-door pickup truck with a V-shaped 8-cylinder GM LM4 engine, boasting a 5.3L displacement and Sequential Fuel Injection. Manufactured in Maryland by General Motors, this 4x2 truck falls under the Class 2E gross vehicle weight rating and is part of the 1/2 Ton series. Its stylish design and robust performance make it a standout in the pickup category.
Spec:
Brake System Type
Hydraulic
Engine Configuration
V-Shaped
Engine Manufacturer
GM
Engine Model
LM4
Engine Number of Cylinders
8
Other Engine Info
Alum
Problems:
Brake fluid leaks
Hydraulic brake systems can develop leaks in the brake lines, master cylinder, or calipers, leading to reduced braking efficiency.
Brake pad wear
Over time, brake pads wear down and need replacement to maintain effective braking performance.
Brake rotor warping
Excessive heat or improper braking can cause brake rotors to warp, leading to vibrations and reduced braking efficiency.
Oil consumption
The GM LM4 engine may experience higher oil consumption, which can lead to low oil levels and potential engine damage if not monitored.
Lifter noise
V-shaped engines, particularly GM's LM4, can develop lifter noise over time due to wear and tear on the valvetrain components.
Intake manifold gasket leaks
The 2004 Chevrolet SSR with an LM4 engine may experience intake manifold gasket leaks, leading to coolant or vacuum leaks.
Coolant leaks
The aluminum components of the engine can develop leaks over time, particularly around the water pump or thermostat housing.
Timing chain wear
Over time, the timing chain can stretch or wear, leading to potential issues with engine timing and performance.
Fuel injector issues
Clogged or malfunctioning fuel injectors can cause poor engine performance, misfires, and reduced fuel efficiency.
Throttle body issues
The throttle body can become dirty or malfunction, leading to erratic idling or poor throttle response.