The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

Older Mazda engines, especially from the 1990 era, can develop oil leaks due to worn seals and gaskets.

Aging cooling systems, including radiators and water pumps, may fail, leading to engine overheating.

Carbon buildup in the combustion chamber or worn engine bearings can cause knocking noises.

Problems with the throttle body or idle air control valve can cause rough or unstable idling.

If not replaced at recommended intervals, the timing belt can break, leading to severe engine damage.

Clogged fuel injectors or a failing fuel pump can cause poor engine performance and stalling.

Older wiring and connectors may lead to electrical problems affecting engine performance and starting reliability.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

Apex seals in rotary engines are prone to wear and failure, leading to loss of compression and power.

Rotary engines can run hot due to their design, leading to potential overheating issues.

Rotary engines often consume more oil than piston engines, requiring frequent oil checks and top-ups.

Carbon can build up in the combustion chambers, affecting performance and efficiency.

The engine's vacuum system may develop leaks, leading to rough idling and performance issues.

Rotary engines can experience issues with ignition timing and spark plug wear, affecting engine performance.

Coolant seals in rotary engines can fail, leading to leaks and overheating problems.

The rotor housings can wear over time, leading to reduced compression and the need for a rebuild.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

Older Mazda engines, especially from the 1990 era, can develop oil leaks due to worn seals and gaskets.

Aging cooling systems, including radiators and water pumps, may fail, leading to engine overheating.

Carbon buildup in the combustion chamber or worn engine bearings can cause knocking noises.

Problems with the throttle body or idle air control valve can cause rough or unstable idling.

If not replaced at recommended intervals, the timing belt can break, leading to severe engine damage.

Clogged fuel injectors or a failing fuel pump can cause poor engine performance and stalling.

Older wiring and connectors may lead to electrical problems affecting engine performance and starting reliability.

Due to the unique design of the rotary engine, the apex seals can wear out faster than traditional piston engine components, leading to compression loss and reduced performance.

Rotary engines, such as the Mazda 13BE in the RX-7, are known for higher oil consumption, which requires vigilant monitoring and frequent top-offs.

The rotary engine generates more heat compared to piston engines, making the cooling system critical. Problems with the cooling system can lead to overheating and engine damage.

The RX-7's rotary engine is prone to flooding, especially if it is started and stopped without reaching operating temperature. This can make the engine hard to start.

The design of the rotary engine can lead to carbon build-up on the rotor faces and combustion chambers, which affects engine efficiency and performance.

The RX-7’s rotary engine relies heavily on vacuum systems. Leaks can cause idling issues, poor performance, and even stalling.

Due to the high-revving nature of the rotary engine, fuel injectors can become clogged or fail, leading to poor fuel delivery and engine performance issues.

The rotary engine uses a dual-spark plug system for each rotor, and issues with the ignition system can lead to misfires and reduced engine efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda RX-7's rotary engine, particularly the 13B, is prone to coolant leaks due to the design and age of the engine. This can lead to overheating if not addressed.

The apex seals in the rotary engine can wear out, leading to a loss of compression and engine power. This is a common issue in older rotary engines.

Rotary engines, including the 13B, tend to consume more oil than piston engines. Regular monitoring and topping off of oil levels are necessary to prevent engine damage.

Over time, vacuum hoses can deteriorate and cause vacuum leaks, leading to rough idling and poor engine performance.

The RX-7's ignition system can develop problems, particularly with the ignition coils and spark plugs, leading to misfires and performance issues.

The fuel injectors and fuel pump can wear out or become clogged, causing poor fuel delivery and engine performance issues.

If the RX-7 is equipped with a turbocharger, it can wear out over time, leading to reduced performance and potential engine damage if not maintained properly.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.

The Mazda MX-5's B60 engine may develop oil leaks over time, often from the valve cover gasket or oil pan gasket.

The cooling system components, such as the radiator or water pump, may fail, leading to engine overheating.

The timing belt in the B60 engine should be replaced at regular intervals to prevent it from snapping, which can cause severe engine damage.

Dirty or clogged fuel injectors can lead to poor engine performance and reduced fuel efficiency.

The ignition coils may wear out over time, leading to misfires and reduced engine power.

The exhaust manifold on the B60 engine is prone to cracking, which can cause exhaust leaks and affect engine performance.

Sensors such as the oxygen sensor or mass air flow sensor can fail, leading to poor engine performance and increased emissions.

The EGR (Exhaust Gas Recirculation) valve can become clogged or fail, causing rough idling and reduced fuel efficiency.