Dynamic Brake Support (DBS) systems, while helpful, can sometimes malfunction or fail to activate properly, resulting in reduced braking efficiency.

With a naturally aspirated engine, there can be performance issues such as loss of power or inconsistent acceleration, especially if the engine is not properly maintained.

The varying engine brake horsepower (200-205 hp) might lead to inconsistent engine braking performance, particularly noticeable during manual and automatic transmission shifts.

A 4-cylinder engine, if not well-maintained, can experience cylinder misfires, leading to rough idling, reduced power, and increased fuel consumption.

As a 2018 model, general wear and tear could affect various engine components, requiring regular maintenance to ensure optimal performance.

Naturally aspirated engines generally have lower power output compared to turbocharged engines, which might not meet performance expectations for some drivers.

Calipers can sometimes seize or stick, leading to uneven braking and increased wear on brake pads and discs.

Vented discs can suffer from warping due to excessive heat during heavy braking, causing vibration or pulsation when braking.

The electronic system can sometimes fail or malfunction, leading to reduced braking assistance in emergency situations.

High-performance engines like the 381 hp V8 can suffer from issues like excessive oil consumption, overheating, or premature wear if not properly maintained.

V-shaped engines can be more complex and difficult to service compared to inline engines, leading to higher maintenance costs.

While Toyota engines are generally reliable, they can still experience common issues like timing belt/chain wear, oil leaks, and sensor failures.

This specific model is known for potential issues with the air injection pump and system, which can lead to emissions problems and reduced engine performance.

V8 engines can be more fuel-intensive and may require more frequent maintenance compared to smaller engines.

Multi-port injection systems can have issues with fuel injectors clogging or failing, leading to poor engine performance and reduced fuel efficiency.

The Toyota Land Cruiser is known for its reliability, but common issues might include suspension wear, electrical system glitches, and transmission problems over time.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

Calipers can sometimes seize or stick, leading to uneven braking and increased wear on brake pads and discs.

Vented discs can suffer from warping due to excessive heat during heavy braking, causing vibration or pulsation when braking.

The electronic system can sometimes fail or malfunction, leading to reduced braking assistance in emergency situations.

High-performance engines like the 381 hp V8 can suffer from issues like excessive oil consumption, overheating, or premature wear if not properly maintained.

V-shaped engines can be more complex and difficult to service compared to inline engines, leading to higher maintenance costs.

While Toyota engines are generally reliable, they can still experience common issues like timing belt/chain wear, oil leaks, and sensor failures.

This specific model is known for potential issues with the air injection pump and system, which can lead to emissions problems and reduced engine performance.

V8 engines can be more fuel-intensive and may require more frequent maintenance compared to smaller engines.

Multi-port injection systems can have issues with fuel injectors clogging or failing, leading to poor engine performance and reduced fuel efficiency.

The Toyota Land Cruiser is known for its reliability, but common issues might include suspension wear, electrical system glitches, and transmission problems over time.

Over time, the calipers can seize due to corrosion or lack of lubrication, leading to uneven brake wear or reduced braking efficiency.

The front vented discs can become warped from excessive heat or heavy braking, causing vibration when braking.

The brake system may experience fade during extended periods of heavy braking, reducing braking power.

Issues with the Dynamic Brake Support system may arise, affecting the vehicle's ability to provide additional braking force during emergency stops.

The 1GR-FE engine may experience misfires due to ignition coil failure or spark plug issues, leading to rough idling and reduced performance.

The V-shaped configuration of the engine may lead to oil leaks from valve cover gaskets or other seals.

Over time, the timing chain on the 1GR-FE engine may stretch or wear, causing timing issues and potentially engine damage.

The engine may develop coolant leaks from the water pump or radiator, leading to overheating problems.

Sequential MPI system may experience clogged or failing fuel injectors, leading to poor fuel economy and engine performance.

The exhaust manifold on the 1GR-FE engine may develop cracks, leading to exhaust leaks and increased emissions.

The vehicle may experience hard or delayed shifting, which can be related to the transmission control module or fluid levels.

The 4-Runner's suspension components may wear out over time, leading to a rough ride or poor handling.

Common electrical issues may include problems with the battery, alternator, or wiring, leading to starting problems or accessory malfunctions.

Over time, the calipers can seize due to corrosion or lack of lubrication, leading to uneven brake wear or reduced braking efficiency.

The front vented discs can become warped from excessive heat or heavy braking, causing vibration when braking.

The brake system may experience fade during extended periods of heavy braking, reducing braking power.

Issues with the Dynamic Brake Support system may arise, affecting the vehicle's ability to provide additional braking force during emergency stops.

The 1GR-FE engine may experience misfires due to ignition coil failure or spark plug issues, leading to rough idling and reduced performance.

The V-shaped configuration of the engine may lead to oil leaks from valve cover gaskets or other seals.

Over time, the timing chain on the 1GR-FE engine may stretch or wear, causing timing issues and potentially engine damage.

The engine may develop coolant leaks from the water pump or radiator, leading to overheating problems.

Sequential MPI system may experience clogged or failing fuel injectors, leading to poor fuel economy and engine performance.

The exhaust manifold on the 1GR-FE engine may develop cracks, leading to exhaust leaks and increased emissions.

The vehicle may experience hard or delayed shifting, which can be related to the transmission control module or fluid levels.

The 4-Runner's suspension components may wear out over time, leading to a rough ride or poor handling.

Common electrical issues may include problems with the battery, alternator, or wiring, leading to starting problems or accessory malfunctions.

Over time, the calipers can seize due to corrosion or lack of lubrication, leading to uneven brake wear or reduced braking efficiency.

The front vented discs can become warped from excessive heat or heavy braking, causing vibration when braking.

The brake system may experience fade during extended periods of heavy braking, reducing braking power.

Issues with the Dynamic Brake Support system may arise, affecting the vehicle's ability to provide additional braking force during emergency stops.

The 1GR-FE engine may experience misfires due to ignition coil failure or spark plug issues, leading to rough idling and reduced performance.

The V-shaped configuration of the engine may lead to oil leaks from valve cover gaskets or other seals.

Over time, the timing chain on the 1GR-FE engine may stretch or wear, causing timing issues and potentially engine damage.

The engine may develop coolant leaks from the water pump or radiator, leading to overheating problems.

Sequential MPI system may experience clogged or failing fuel injectors, leading to poor fuel economy and engine performance.

The exhaust manifold on the 1GR-FE engine may develop cracks, leading to exhaust leaks and increased emissions.

The vehicle may experience hard or delayed shifting, which can be related to the transmission control module or fluid levels.

The 4-Runner's suspension components may wear out over time, leading to a rough ride or poor handling.

Common electrical issues may include problems with the battery, alternator, or wiring, leading to starting problems or accessory malfunctions.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

Over time, the calipers can seize due to corrosion or lack of lubrication, leading to uneven brake wear or reduced braking efficiency.

The front vented discs can become warped from excessive heat or heavy braking, causing vibration when braking.

The brake system may experience fade during extended periods of heavy braking, reducing braking power.

Issues with the Dynamic Brake Support system may arise, affecting the vehicle's ability to provide additional braking force during emergency stops.

The 1GR-FE engine may experience misfires due to ignition coil failure or spark plug issues, leading to rough idling and reduced performance.

The V-shaped configuration of the engine may lead to oil leaks from valve cover gaskets or other seals.

Over time, the timing chain on the 1GR-FE engine may stretch or wear, causing timing issues and potentially engine damage.

The engine may develop coolant leaks from the water pump or radiator, leading to overheating problems.

Sequential MPI system may experience clogged or failing fuel injectors, leading to poor fuel economy and engine performance.

The exhaust manifold on the 1GR-FE engine may develop cracks, leading to exhaust leaks and increased emissions.

The vehicle may experience hard or delayed shifting, which can be related to the transmission control module or fluid levels.

The 4-Runner's suspension components may wear out over time, leading to a rough ride or poor handling.

Common electrical issues may include problems with the battery, alternator, or wiring, leading to starting problems or accessory malfunctions.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

Calipers can sometimes seize or stick, leading to uneven braking and increased wear on brake pads and discs.

Vented discs can suffer from warping due to excessive heat during heavy braking, causing vibration or pulsation when braking.

The electronic system can sometimes fail or malfunction, leading to reduced braking assistance in emergency situations.

High-performance engines like the 381 hp V8 can suffer from issues like excessive oil consumption, overheating, or premature wear if not properly maintained.

V-shaped engines can be more complex and difficult to service compared to inline engines, leading to higher maintenance costs.

While Toyota engines are generally reliable, they can still experience common issues like timing belt/chain wear, oil leaks, and sensor failures.

This specific model is known for potential issues with the air injection pump and system, which can lead to emissions problems and reduced engine performance.

V8 engines can be more fuel-intensive and may require more frequent maintenance compared to smaller engines.

Multi-port injection systems can have issues with fuel injectors clogging or failing, leading to poor engine performance and reduced fuel efficiency.

The Toyota Land Cruiser is known for its reliability, but common issues might include suspension wear, electrical system glitches, and transmission problems over time.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

Over time, the calipers can seize due to corrosion or lack of lubrication, leading to uneven brake wear or reduced braking efficiency.

The front vented discs can become warped from excessive heat or heavy braking, causing vibration when braking.

The brake system may experience fade during extended periods of heavy braking, reducing braking power.

Issues with the Dynamic Brake Support system may arise, affecting the vehicle's ability to provide additional braking force during emergency stops.

The 1GR-FE engine may experience misfires due to ignition coil failure or spark plug issues, leading to rough idling and reduced performance.

The V-shaped configuration of the engine may lead to oil leaks from valve cover gaskets or other seals.

Over time, the timing chain on the 1GR-FE engine may stretch or wear, causing timing issues and potentially engine damage.

The engine may develop coolant leaks from the water pump or radiator, leading to overheating problems.

Sequential MPI system may experience clogged or failing fuel injectors, leading to poor fuel economy and engine performance.

The exhaust manifold on the 1GR-FE engine may develop cracks, leading to exhaust leaks and increased emissions.

The vehicle may experience hard or delayed shifting, which can be related to the transmission control module or fluid levels.

The 4-Runner's suspension components may wear out over time, leading to a rough ride or poor handling.

Common electrical issues may include problems with the battery, alternator, or wiring, leading to starting problems or accessory malfunctions.

Over time, the calipers can seize due to corrosion or lack of lubrication, leading to uneven brake wear or reduced braking efficiency.

The front vented discs can become warped from excessive heat or heavy braking, causing vibration when braking.

The brake system may experience fade during extended periods of heavy braking, reducing braking power.

Issues with the Dynamic Brake Support system may arise, affecting the vehicle's ability to provide additional braking force during emergency stops.

The 1GR-FE engine may experience misfires due to ignition coil failure or spark plug issues, leading to rough idling and reduced performance.

The V-shaped configuration of the engine may lead to oil leaks from valve cover gaskets or other seals.

Over time, the timing chain on the 1GR-FE engine may stretch or wear, causing timing issues and potentially engine damage.

The engine may develop coolant leaks from the water pump or radiator, leading to overheating problems.

Sequential MPI system may experience clogged or failing fuel injectors, leading to poor fuel economy and engine performance.

The exhaust manifold on the 1GR-FE engine may develop cracks, leading to exhaust leaks and increased emissions.

The vehicle may experience hard or delayed shifting, which can be related to the transmission control module or fluid levels.

The 4-Runner's suspension components may wear out over time, leading to a rough ride or poor handling.

Common electrical issues may include problems with the battery, alternator, or wiring, leading to starting problems or accessory malfunctions.

The front vented discs and rear drums may experience brake fade due to overheating during prolonged use or heavy braking, reducing braking efficiency.

The brake calipers might stick, leading to uneven brake pad wear and reduced braking performance.

The rear drums can wear out over time, causing reduced braking power and potential vibrations during braking.

The front vented discs can warp due to excessive heat, leading to brake pedal pulsation and reduced braking efficiency.

The DBS system could malfunction, potentially leading to reduced emergency braking assistance.

The 2GR-FKS V6 engine might experience misfires due to issues with spark plugs, ignition coils, or fuel injectors.

The V-shaped engine configuration could develop oil leaks from gaskets or seals, leading to oil consumption and potential engine damage.

The 2GR-FKS engine might produce excessive noise due to valve train issues or timing chain wear.

The engine could overheat due to cooling system problems such as a failing water pump, radiator, or thermostat.

The engine might experience fuel delivery issues, such as a clogged fuel filter or failing fuel pump, leading to poor performance.

The PORT+CHAMBER configuration might lead to carbon buildup on intake valves, affecting engine performance and efficiency.

The vehicle may experience transmission problems such as hard shifting or slipping, affecting overall drivability.

Dynamic Brake Support (DBS) systems, while helpful, can sometimes malfunction or fail to activate properly, resulting in reduced braking efficiency.

With a naturally aspirated engine, there can be performance issues such as loss of power or inconsistent acceleration, especially if the engine is not properly maintained.

The varying engine brake horsepower (200-205 hp) might lead to inconsistent engine braking performance, particularly noticeable during manual and automatic transmission shifts.

A 4-cylinder engine, if not well-maintained, can experience cylinder misfires, leading to rough idling, reduced power, and increased fuel consumption.

As a 2018 model, general wear and tear could affect various engine components, requiring regular maintenance to ensure optimal performance.

Naturally aspirated engines generally have lower power output compared to turbocharged engines, which might not meet performance expectations for some drivers.

Over time, the calipers can seize due to corrosion or lack of lubrication, leading to uneven brake wear or reduced braking efficiency.

The front vented discs can become warped from excessive heat or heavy braking, causing vibration when braking.

The brake system may experience fade during extended periods of heavy braking, reducing braking power.

Issues with the Dynamic Brake Support system may arise, affecting the vehicle's ability to provide additional braking force during emergency stops.

The 1GR-FE engine may experience misfires due to ignition coil failure or spark plug issues, leading to rough idling and reduced performance.

The V-shaped configuration of the engine may lead to oil leaks from valve cover gaskets or other seals.

Over time, the timing chain on the 1GR-FE engine may stretch or wear, causing timing issues and potentially engine damage.

The engine may develop coolant leaks from the water pump or radiator, leading to overheating problems.

Sequential MPI system may experience clogged or failing fuel injectors, leading to poor fuel economy and engine performance.

The exhaust manifold on the 1GR-FE engine may develop cracks, leading to exhaust leaks and increased emissions.

The vehicle may experience hard or delayed shifting, which can be related to the transmission control module or fluid levels.

The 4-Runner's suspension components may wear out over time, leading to a rough ride or poor handling.

Common electrical issues may include problems with the battery, alternator, or wiring, leading to starting problems or accessory malfunctions.

Over time, the calipers can seize due to corrosion or lack of lubrication, leading to uneven brake wear or reduced braking efficiency.

The front vented discs can become warped from excessive heat or heavy braking, causing vibration when braking.

The brake system may experience fade during extended periods of heavy braking, reducing braking power.

Issues with the Dynamic Brake Support system may arise, affecting the vehicle's ability to provide additional braking force during emergency stops.

The 1GR-FE engine may experience misfires due to ignition coil failure or spark plug issues, leading to rough idling and reduced performance.

The V-shaped configuration of the engine may lead to oil leaks from valve cover gaskets or other seals.

Over time, the timing chain on the 1GR-FE engine may stretch or wear, causing timing issues and potentially engine damage.

The engine may develop coolant leaks from the water pump or radiator, leading to overheating problems.

Sequential MPI system may experience clogged or failing fuel injectors, leading to poor fuel economy and engine performance.

The exhaust manifold on the 1GR-FE engine may develop cracks, leading to exhaust leaks and increased emissions.

The vehicle may experience hard or delayed shifting, which can be related to the transmission control module or fluid levels.

The 4-Runner's suspension components may wear out over time, leading to a rough ride or poor handling.

Common electrical issues may include problems with the battery, alternator, or wiring, leading to starting problems or accessory malfunctions.

The brake calipers may seize or stick, causing uneven brake pad wear and potentially leading to decreased braking performance or brake failure.

Vented discs can warp under high stress or heat, resulting in vibrations during braking and reduced braking efficiency.

Contaminated brake fluid can lead to corrosion within the brake system, compromising brake performance and potentially causing brake failure.

The Dynamic Brake Support (DBS) system may fail or malfunction, reducing the effectiveness of emergency braking assistance.

The 3UR-FE engine, like other V8 engines, can experience knocking or pinging noises, which might indicate pre-ignition or detonation issues.

Given the age of the vehicle, oil leaks may develop around gaskets, seals, or other engine components, leading to potential engine damage if not addressed.

The i-FORCE engine with Sequential Multi-Port Injection (MPI) might experience issues with fuel injectors or other components, leading to higher than normal fuel consumption.

Issues with the ignition system, fuel delivery, or engine management system can cause engine misfires, leading to rough running and decreased performance.

Given the powerful V8 configuration, engine mounts may wear out faster, leading to increased vibrations and noise.

The engine may overheat due to issues with the radiator, water pump, or cooling fans, leading to potential engine damage if not addressed.

The oxygen sensors in the exhaust system may fail over time, leading to incorrect air-fuel mixture adjustments and potentially triggering the check engine light.