Most Common Car Issues

Selected parameters

Add more parameters

Engine Brake (hp) From

Engine Configuration

Engine Manufacturer

Engine Model

Engine Number of Cylinders

Model Year

MOST COMMON PROBLEMS

VOLVO 740 Series 1991

The 1991 Volvo 740 Series is a classic 4-door sedan powered by a 2.3L in-line 4-cylinder engine, producing 116 horsepower. Manufactured by Volvo Car Corporation in Ghent, Belgium, this turbocharged model runs on gasoline and includes an airbag restraint system. This vehicle is renowned for its reliability and robust build quality.

Spec:

Engine Brake (hp) From

116

Engine Configuration

In-Line

Engine Manufacturer

Volvo

Engine Model

B230F

Engine Number of Cylinders

Problems:

Oil leaks

Common in older engines, especially around the valve cover gasket and oil pan gasket.

Timing belt issues

The timing belt must be replaced at regular intervals to prevent engine damage.

Cooling system problems

Radiator, water pump, and thermostat failures can lead to overheating.

Fuel injector problems

Dirty or clogged fuel injectors can cause poor fuel economy and rough idling.

Distributor cap and rotor wear

Can lead to misfires and poor engine performance.

Mass air flow sensor failure

Can cause erratic engine behavior and reduced power.

Ignition coil problems

Faulty ignition coils can lead to misfires and starting issues.

Exhaust manifold cracks

Often occurs due to thermal expansion and contraction over time.

VOLVO 740 Series 1987

The 1987 Volvo 740 Series is a classic sedan featuring a 2.3L in-line 4-cylinder B230F engine, producing 116 hp. Manufactured in Gothenburg, Sweden, this model boasts a turbocharged engine and 3-point seat belts for safety. With its 4-door configuration, it's designed for both comfort and reliability.

Spec:

Engine Brake (hp) From

116

Engine Configuration

In-Line

Engine Manufacturer

Volvo

Engine Model

B230F

Engine Number of Cylinders

Problems:

Oil leaks

The Volvo B230F engine is known for developing oil leaks over time, especially from the valve cover gasket and oil pan gasket.

Timing belt issues

The B230F engine uses a timing belt that needs regular replacement. If it fails, it can cause significant engine damage.

Exhaust manifold cracking

The exhaust manifolds on these engines are prone to cracking, which can lead to exhaust leaks and reduced engine performance.

Vacuum leaks

The intake manifold and various vacuum hoses can develop leaks, leading to poor engine performance and fuel economy.

Fuel injector problems

Over time, the fuel injectors can become clogged or fail, causing rough idle, poor acceleration, and increased fuel consumption.

Cooling system failures

Components such as the radiator, water pump, and thermostat can fail, leading to overheating issues.

Distributor cap and rotor wear

The distributor cap and rotor can wear out, causing misfires and rough engine running.

Idle control valve failure

The idle control valve can fail, leading to erratic idling and stalling issues.

Sensor failures

Sensors such as the mass airflow sensor (MAF) and oxygen sensors can fail, leading to poor engine performance and increased emissions.

VOLVO 740 Series 1987

The 1987 Volvo 740 Series Wagon is a classic Swedish passenger car known for its durability and safety features. Equipped with a 4-cylinder B230FS1 engine and 5 doors, it offers practicality and reliability. Manufactured in Gothenburg, Sweden, this model includes a 3-point manual seat belt system for added security.

Spec:

Engine Model

B230FS1

Engine Number of Cylinders

Problems:

Oil leaks

Oil leaks are a common issue with the Volvo 740 Series, especially around the valve cover gasket and oil pan gasket.

Timing belt failure

The timing belt can wear out or break if not replaced at the recommended intervals, leading to severe engine damage.

Coolant leaks

Coolant leaks can occur due to aging hoses, water pump failures, or a cracked radiator, causing the engine to overheat.

Engine overheating

Overheating can be caused by a malfunctioning thermostat, a clogged radiator, or a failing water pump.

Vacuum leaks

Vacuum leaks from old or cracked hoses can lead to poor engine performance and rough idling.

Fuel pump issues

The fuel pump can fail or become weak over time, leading to starting issues and poor engine performance.

Idle control valve problems

A faulty idle control valve can cause irregular idling and stalling.

Ignition system faults

Issues with the distributor cap, rotor, ignition coil, or spark plugs can lead to misfires and poor engine performance.