Most Common Car Issues
Add more parameters
MOST COMMON PROBLEMS
BMW 325/325e 1985
The 1985 BMW 325/325e is a classic 2-door sedan from the renowned 3-Series E30 lineup. Powered by a 2.7L inline-6 engine producing 121 hp, it delivers a balanced mix of performance and efficiency. Manufactured in Dingolfing, Germany, this model epitomizes BMW's engineering excellence of the era.
Spec:
Engine Brake (hp) From
121
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
The 1985 BMW 325/325e, especially with a 6-cylinder engine, is prone to oil leaks due to aging gaskets and seals.
Cooling system issues
The cooling system, including the radiator, water pump, and thermostat, often experiences failures that can lead to overheating.
Timing belt failure
The timing belt in this model needs regular replacement; failure to do so can result in severe engine damage.
Fuel injector problems
Fuel injectors can become clogged or fail, leading to poor engine performance or misfires.
Vacuum leaks
Vacuum leaks are common and can cause erratic idle, loss of power, and increased fuel consumption.
Valve cover gasket leaks
The valve cover gasket tends to wear out and leak oil, particularly in older BMW models.
Idle control valve issues
The idle control valve can fail or get dirty, causing rough or unstable idling.
Mass air flow sensor failure
The MAF sensor can fail or become contaminated, leading to incorrect air/fuel mixture and poor engine performance.
Crankshaft position sensor failure
Failure of the crankshaft position sensor can lead to hard starting or no-start conditions.
Exhaust system rust
The exhaust system is prone to rust, particularly in older models, which can lead to leaks and increased noise.
BMW 325/325e 1985
The 1985 BMW 325/325e is a classic two-door sedan from the 3-Series E30 lineup, featuring a 2.7L inline-six engine producing 121 hp. Manufactured in Dingolfing, Germany, this vehicle runs on gasoline and showcases BMW's engineering excellence.
Spec:
Engine Brake (hp) From
121
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6
Problems:
Oil leaks
The 1985 BMW 325/325e, especially with a 6-cylinder engine, is prone to oil leaks due to aging gaskets and seals.
Cooling system issues
The cooling system, including the radiator, water pump, and thermostat, often experiences failures that can lead to overheating.
Timing belt failure
The timing belt in this model needs regular replacement; failure to do so can result in severe engine damage.
Fuel injector problems
Fuel injectors can become clogged or fail, leading to poor engine performance or misfires.
Vacuum leaks
Vacuum leaks are common and can cause erratic idle, loss of power, and increased fuel consumption.
Valve cover gasket leaks
The valve cover gasket tends to wear out and leak oil, particularly in older BMW models.
Idle control valve issues
The idle control valve can fail or get dirty, causing rough or unstable idling.
Mass air flow sensor failure
The MAF sensor can fail or become contaminated, leading to incorrect air/fuel mixture and poor engine performance.
Crankshaft position sensor failure
Failure of the crankshaft position sensor can lead to hard starting or no-start conditions.
Exhaust system rust
The exhaust system is prone to rust, particularly in older models, which can lead to leaks and increased noise.