Most Common Car Issues

Selected parameters

Model
325iS
Model Year
1987

Add more parameters

MOST COMMON PROBLEMS

BMW 325iS 1987

The 1987 BMW 325iS is a classic 2-door sedan from the renowned 3-Series E30 lineup. Powered by a 2.5L inline-6 engine producing 168 hp, it runs on gasoline and was manufactured in Dingolfing, Germany. This model is celebrated for its engaging driving dynamics and timeless design.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1987 BMW 325iS is known for oil leaks, particularly from the valve cover gasket and oil pan gasket due to aging seals.
Overheating
These models can suffer from overheating issues, often due to a failing thermostat, water pump, or radiator.
Timing belt failure
The timing belt may wear out or fail if not replaced at the recommended intervals, leading to potential engine damage.
Vacuum leaks
Aging hoses and gaskets can cause vacuum leaks, leading to rough idling and poor engine performance.
Ignition system problems
Issues with the distributor, spark plugs, or ignition coil can cause misfires and reduced engine performance.
Fuel system issues
Problems with the fuel pump, fuel injectors, or fuel filter can result in poor fuel delivery and reduced engine efficiency.
Cooling system leaks
Leaks in the cooling system, such as from the radiator, heater core, or hoses, can lead to coolant loss and overheating.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or not start.
BMW 325iS 1987

The 1987 BMW 325iS is a classic 2-door sedan from the renowned 3-Series E30 lineup. Powered by a 2.5L inline-6 engine producing 168 hp, this gasoline-driven beauty hails from BMW's Dingolfing plant in Germany. Known for its sporty performance and iconic design, it's a beloved model among automotive enthusiasts.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1987 BMW 325iS is known for oil leaks, particularly from the valve cover gasket and oil pan gasket due to aging seals.
Overheating
These models can suffer from overheating issues, often due to a failing thermostat, water pump, or radiator.
Timing belt failure
The timing belt may wear out or fail if not replaced at the recommended intervals, leading to potential engine damage.
Vacuum leaks
Aging hoses and gaskets can cause vacuum leaks, leading to rough idling and poor engine performance.
Ignition system problems
Issues with the distributor, spark plugs, or ignition coil can cause misfires and reduced engine performance.
Fuel system issues
Problems with the fuel pump, fuel injectors, or fuel filter can result in poor fuel delivery and reduced engine efficiency.
Cooling system leaks
Leaks in the cooling system, such as from the radiator, heater core, or hoses, can lead to coolant loss and overheating.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or not start.
BMW 325iS 1987

The 1987 BMW 325iS is a classic 3-Series sedan featuring a 2.5L 6-cylinder engine producing 168 hp. Manufactured by BMW AG in Dingolfing, Germany, this iconic model comes with a 2-door body style and an automatic transmission. Known for its balanced performance and stylish design, the E30 series remains a favorite among car enthusiasts.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6

Problems:

Overheating
Common in older BMW engines, often due to failing water pumps, clogged radiators, or faulty thermostats.
Oil leaks
Often occur due to worn gaskets, seals, or valve cover gaskets, leading to oil seeping out.
Timing belt/chain issues
May experience wear or failure, causing poor engine performance or engine damage.
Vacuum leaks
Can cause rough idling, stalling, or poor fuel economy, often due to deteriorated hoses or gaskets.
Fuel system problems
Issues with fuel injectors, fuel pumps, or fuel filters can lead to poor engine performance or starting problems.
Ignition coil failure
Can cause misfires, rough running, and reduced power due to failure of these critical components.
Head gasket failure
Can lead to overheating, coolant loss, and engine damage, common in older engines.
Carbon buildup
Can cause poor performance and increased emissions, often due to lack of regular maintenance.
Crankshaft position sensor failure
Can lead to starting issues, misfires, and stalling.
Worn engine mounts
Can cause excessive engine vibration and noise, affecting overall engine performance.
BMW 325iS 1987

The 1987 BMW 325iS is a classic 3-Series E30 sedan with a 2.5L 6-cylinder engine producing 168 hp. Manufactured in Dingolfing, Germany, this two-door passenger car features a manual seat belt system and an automatic transmission. Sporting BMW's iconic engineering, it's a timeless blend of performance and style.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6

Problems:

Overheating
Common in older BMW engines, often due to failing water pumps, clogged radiators, or faulty thermostats.
Oil leaks
Often occur due to worn gaskets, seals, or valve cover gaskets, leading to oil seeping out.
Timing belt/chain issues
May experience wear or failure, causing poor engine performance or engine damage.
Vacuum leaks
Can cause rough idling, stalling, or poor fuel economy, often due to deteriorated hoses or gaskets.
Fuel system problems
Issues with fuel injectors, fuel pumps, or fuel filters can lead to poor engine performance or starting problems.
Ignition coil failure
Can cause misfires, rough running, and reduced power due to failure of these critical components.
Head gasket failure
Can lead to overheating, coolant loss, and engine damage, common in older engines.
Carbon buildup
Can cause poor performance and increased emissions, often due to lack of regular maintenance.
Crankshaft position sensor failure
Can lead to starting issues, misfires, and stalling.
Worn engine mounts
Can cause excessive engine vibration and noise, affecting overall engine performance.
BMW 325iS 1987

The 1987 BMW 325iS is a classic 2-door sedan from the renowned 3-Series E30 lineup. Powered by a 2.5L inline-6 engine producing 168 hp, this gasoline-driven car was manufactured in Regensburg, Germany. With its sporty design and manual seat belts, it remains a cherished model among BMW enthusiasts.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1987 BMW 325iS is known for oil leaks, particularly from the valve cover gasket and oil pan gasket due to aging seals.
Overheating
These models can suffer from overheating issues, often due to a failing thermostat, water pump, or radiator.
Timing belt failure
The timing belt may wear out or fail if not replaced at the recommended intervals, leading to potential engine damage.
Vacuum leaks
Aging hoses and gaskets can cause vacuum leaks, leading to rough idling and poor engine performance.
Ignition system problems
Issues with the distributor, spark plugs, or ignition coil can cause misfires and reduced engine performance.
Fuel system issues
Problems with the fuel pump, fuel injectors, or fuel filter can result in poor fuel delivery and reduced engine efficiency.
Cooling system leaks
Leaks in the cooling system, such as from the radiator, heater core, or hoses, can lead to coolant loss and overheating.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or not start.
BMW 325iS 1987

The 1987 BMW 325iS is a classic 2-door sedan from the renowned 3-Series E30 lineup. It features a 2.5L inline-6 engine producing 168 hp, manufactured by BMW-AG. Built in Dingolfing, Germany, this model runs on gasoline and is known for its sporty performance and timeless design.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Number of Cylinders
6

Problems:

Oil leaks
The 1987 BMW 325iS is known for oil leaks, particularly from the valve cover gasket and oil pan gasket due to aging seals.
Overheating
These models can suffer from overheating issues, often due to a failing thermostat, water pump, or radiator.
Timing belt failure
The timing belt may wear out or fail if not replaced at the recommended intervals, leading to potential engine damage.
Vacuum leaks
Aging hoses and gaskets can cause vacuum leaks, leading to rough idling and poor engine performance.
Ignition system problems
Issues with the distributor, spark plugs, or ignition coil can cause misfires and reduced engine performance.
Fuel system issues
Problems with the fuel pump, fuel injectors, or fuel filter can result in poor fuel delivery and reduced engine efficiency.
Cooling system leaks
Leaks in the cooling system, such as from the radiator, heater core, or hoses, can lead to coolant loss and overheating.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or not start.
BMW 325iS 1987

The 1987 BMW 325iS is a sleek sedan from the renowned 3-Series E30 lineup. Powered by a 2.5L inline-6 engine producing 168 hp, this vehicle offers a dynamic driving experience. Manufactured in Dingolfing, Germany, it features a 2-door design and automatic transmission, making it a classic choice for driving enthusiasts.

Spec:

Engine Brake (hp) From
168
Engine Manufacturer
BMW-AG
Engine Model
4-Value
Engine Number of Cylinders
6

Problems:

Overheating
Common in older BMW engines, often due to failing water pumps, clogged radiators, or faulty thermostats.
Oil leaks
Often occur due to worn gaskets, seals, or valve cover gaskets, leading to oil seeping out.
Timing belt/chain issues
May experience wear or failure, causing poor engine performance or engine damage.
Vacuum leaks
Can cause rough idling, stalling, or poor fuel economy, often due to deteriorated hoses or gaskets.
Fuel system problems
Issues with fuel injectors, fuel pumps, or fuel filters can lead to poor engine performance or starting problems.
Ignition coil failure
Can cause misfires, rough running, and reduced power due to failure of these critical components.
Head gasket failure
Can lead to overheating, coolant loss, and engine damage, common in older engines.
Carbon buildup
Can cause poor performance and increased emissions, often due to lack of regular maintenance.
Crankshaft position sensor failure
Can lead to starting issues, misfires, and stalling.
Worn engine mounts
Can cause excessive engine vibration and noise, affecting overall engine performance.
© Copyright 2024 VinCyp.com Privacy Policy
VIN Decoder (vincyp.com) does not guarantee the accuracy of provided information, including technical data, features, specifications, indicators, etc. All manufacturers' logos, brands, and trademarks are the property of their respective owners.