Some 2022 Subaru BRZ models have been reported to consume more engine oil than expected, which can lead to engine damage if not monitored and maintained properly.

The 2.4L engine in the BRZ has been known to experience knocking noises, which could be a result of improper fuel mixture, low-quality fuel, or internal engine issues.

There have been instances of fuel pump failures that can lead to stalling or difficulty starting the engine.

Some users have reported problems with the timing chain tensioner, which can cause noise and potentially lead to timing issues if not addressed.

Coolant leaks have been noted in some vehicles, which can lead to overheating and engine damage if not promptly repaired.

The engine may experience issues with spark plug fouling, which can lead to misfires and poor engine performance.

Misfires in the engine can be caused by various factors including faulty spark plugs, ignition coils, or fuel injectors. This can lead to poor engine performance and reduced fuel efficiency.

Higher-than-normal oil consumption can be a common issue, possibly due to worn piston rings or valve seals, leading to reduced engine performance and potential damage if not addressed.

This can be caused by using the wrong type of fuel, poor engine timing, or issues with the engine's internals such as the bearings or pistons.

Overheating can be due to a malfunctioning cooling system, such as a faulty radiator, thermostat, or water pump, which can lead to serious engine damage if not resolved promptly.

Problems with the timing chain or belt can lead to engine timing issues, which can cause poor performance or even engine failure if the belt or chain breaks.

Issues with the fuel pump or fuel injectors can cause poor engine performance, stalling, or difficulty starting the vehicle.

Problems with the exhaust system, such as a clogged catalytic converter or damaged oxygen sensors, can affect engine performance and emissions.

Issues with the engine's electrical system, such as a faulty alternator or battery, can lead to starting problems or intermittent electrical failures.

Malfunctioning sensors (e.g., mass airflow sensor, oxygen sensor) can lead to incorrect air-fuel mixture, resulting in poor engine performance and increased emissions.

The 2013 Subaru BRZ with a naturally aspirated engine is known to experience higher than normal oil consumption which may require more frequent oil top-ups.

Valve springs can fail prematurely, potentially causing severe engine damage if not addressed in a timely manner.

Owners have reported a chirping or ticking noise from the high-pressure fuel pump, often described as "cricket noise."

The clutch in the 2013 BRZ can wear out faster than expected, especially under spirited driving conditions.

Some 2013 BRZ models were part of a recall for a faulty fuel pump that could cause the vehicle to stall.

There have been instances where the connecting rod bearings fail, leading to catastrophic engine damage if not caught early.

The 2013 Subaru BRZ with a naturally aspirated engine is known to experience higher than normal oil consumption which may require more frequent oil top-ups.

Valve springs can fail prematurely, potentially causing severe engine damage if not addressed in a timely manner.

Owners have reported a chirping or ticking noise from the high-pressure fuel pump, often described as "cricket noise."

The clutch in the 2013 BRZ can wear out faster than expected, especially under spirited driving conditions.

Some 2013 BRZ models were part of a recall for a faulty fuel pump that could cause the vehicle to stall.

There have been instances where the connecting rod bearings fail, leading to catastrophic engine damage if not caught early.

The 2016 Subaru BRZ with the 2.0 NA engine is known for significant oil consumption, requiring frequent top-offs between oil changes.

Some units have experienced valve spring failures, which can lead to engine misfires and severe engine damage if not addressed promptly.

The high-pressure fuel pump in this model may produce a noticeable ticking or chirping noise, which can be concerning but is typically harmless.

Failures or malfunctions in the crankshaft position sensor can lead to engine stalling or failure to start.

Some owners report issues with coolant leaks, often from the water pump or radiator, which can lead to overheating if not repaired.

The timing chain tensioner can sometimes fail, leading to poor engine performance and potential damage if the chain skips teeth.

Owners may experience a rough idle due to issues with the engine control unit (ECU) or dirty fuel injectors.

The 2013 Subaru BRZ with a naturally aspirated engine is known to experience higher than normal oil consumption which may require more frequent oil top-ups.

Valve springs can fail prematurely, potentially causing severe engine damage if not addressed in a timely manner.

Owners have reported a chirping or ticking noise from the high-pressure fuel pump, often described as "cricket noise."

The clutch in the 2013 BRZ can wear out faster than expected, especially under spirited driving conditions.

Some 2013 BRZ models were part of a recall for a faulty fuel pump that could cause the vehicle to stall.

There have been instances where the connecting rod bearings fail, leading to catastrophic engine damage if not caught early.

The 2013 Subaru BRZ with a naturally aspirated engine is known to experience higher than normal oil consumption which may require more frequent oil top-ups.

Valve springs can fail prematurely, potentially causing severe engine damage if not addressed in a timely manner.

Owners have reported a chirping or ticking noise from the high-pressure fuel pump, often described as "cricket noise."

The clutch in the 2013 BRZ can wear out faster than expected, especially under spirited driving conditions.

Some 2013 BRZ models were part of a recall for a faulty fuel pump that could cause the vehicle to stall.

There have been instances where the connecting rod bearings fail, leading to catastrophic engine damage if not caught early.

The 2016 Subaru BRZ with the 2.0 NA engine is known for significant oil consumption, requiring frequent top-offs between oil changes.

Some units have experienced valve spring failures, which can lead to engine misfires and severe engine damage if not addressed promptly.

The high-pressure fuel pump in this model may produce a noticeable ticking or chirping noise, which can be concerning but is typically harmless.

Failures or malfunctions in the crankshaft position sensor can lead to engine stalling or failure to start.

Some owners report issues with coolant leaks, often from the water pump or radiator, which can lead to overheating if not repaired.

The timing chain tensioner can sometimes fail, leading to poor engine performance and potential damage if the chain skips teeth.

Owners may experience a rough idle due to issues with the engine control unit (ECU) or dirty fuel injectors.

The Subaru BRZ is known to have higher-than-average oil consumption, which could lead to frequent oil top-ups and potential engine damage if not monitored closely.

Some owners report engine knocking, especially during cold starts or under heavy load, which could indicate issues with the ignition system or fuel quality.

There have been recalls related to valve springs, which can fail and cause engine stalling or damage if not addressed.

Issues with the fuel pump can lead to poor engine performance, stalling, or difficulty starting the vehicle.

Coolant leaks from the radiator or hoses can lead to engine overheating, which can cause significant engine damage if not corrected promptly.

Problems with the timing chain tensioner can lead to a rattling noise in the engine and, if not fixed, potential catastrophic engine failure.

The 2014 Subaru BRZ is known to have higher than average oil consumption, which can lead to engine problems if not monitored and maintained regularly.

Some models may experience fuel pump issues, which can cause the engine to stall or have difficulty starting.

There was a recall for defective valve springs that could break and cause engine failure.

Owners have reported a ticking noise from the engine, which could be related to valve train issues or insufficient lubrication.

Some BRZs may experience rough idling, often due to issues with the fuel system or engine management.

A common issue where water condensation forms inside the tail light assemblies, potentially causing electrical problems.

The factory-installed batteries in 2014 BRZ models are known to have a shorter lifespan, leading to frequent replacements.

Premature clutch wear and failure have been reported, sometimes requiring early replacement.

2015 Subaru BRZs with 4-cylinder engines are known for higher-than-normal oil consumption, which can lead to engine wear if not monitored closely.

Some 2015 BRZ models have experienced issues with valve spring failure, which can cause engine misfires and potentially lead to more severe engine damage.

The high-pressure fuel pump in the BRZ can sometimes produce a noticeable ticking noise, which can be annoying but typically doesn't affect engine performance.

Coil packs on the 2015 BRZ may fail prematurely, resulting in misfires and rough engine performance.

The FA20 engine in the BRZ is sensitive to aftermarket tuning and modifications, which can lead to reliability issues if not performed correctly.

The 2014 Subaru BRZ is known to have higher than average oil consumption, which can lead to engine problems if not monitored and maintained regularly.

Some models may experience fuel pump issues, which can cause the engine to stall or have difficulty starting.

There was a recall for defective valve springs that could break and cause engine failure.

Owners have reported a ticking noise from the engine, which could be related to valve train issues or insufficient lubrication.

Some BRZs may experience rough idling, often due to issues with the fuel system or engine management.

A common issue where water condensation forms inside the tail light assemblies, potentially causing electrical problems.

The factory-installed batteries in 2014 BRZ models are known to have a shorter lifespan, leading to frequent replacements.

Premature clutch wear and failure have been reported, sometimes requiring early replacement.

A misfire can occur due to issues with spark plugs, ignition coils, or fuel injectors, leading to rough idling or loss of power.

Over time, seals and gaskets may wear out, causing oil leaks which can lead to engine damage if not addressed.

Problems with the timing chain or belt can cause engine performance issues and, in severe cases, engine failure.

Issues such as clogged fuel filters or failing fuel pumps can result in poor engine performance or stalling.

A malfunctioning radiator, water pump, or thermostat can cause the engine to overheat, potentially leading to severe engine damage.

Malfunctions in sensors like the oxygen sensor or mass airflow sensor can cause poor fuel economy and performance issues.

If the engine is turbocharged, problems such as oil contamination or bearing wear can lead to reduced engine performance or failure.

The valve cover gasket may wear out, causing oil leaks that can lead to reduced engine performance or damage.

The 2016 Subaru BRZ with the 2.0 NA engine is known for significant oil consumption, requiring frequent top-offs between oil changes.

Some units have experienced valve spring failures, which can lead to engine misfires and severe engine damage if not addressed promptly.

The high-pressure fuel pump in this model may produce a noticeable ticking or chirping noise, which can be concerning but is typically harmless.

Failures or malfunctions in the crankshaft position sensor can lead to engine stalling or failure to start.

Some owners report issues with coolant leaks, often from the water pump or radiator, which can lead to overheating if not repaired.

The timing chain tensioner can sometimes fail, leading to poor engine performance and potential damage if the chain skips teeth.

Owners may experience a rough idle due to issues with the engine control unit (ECU) or dirty fuel injectors.

The 2013 Subaru BRZ with a naturally aspirated engine is known to experience higher than normal oil consumption which may require more frequent oil top-ups.

Valve springs can fail prematurely, potentially causing severe engine damage if not addressed in a timely manner.

Owners have reported a chirping or ticking noise from the high-pressure fuel pump, often described as "cricket noise."

The clutch in the 2013 BRZ can wear out faster than expected, especially under spirited driving conditions.

Some 2013 BRZ models were part of a recall for a faulty fuel pump that could cause the vehicle to stall.

There have been instances where the connecting rod bearings fail, leading to catastrophic engine damage if not caught early.

The 2013 Subaru BRZ with a naturally aspirated engine is known to experience higher than normal oil consumption which may require more frequent oil top-ups.

Valve springs can fail prematurely, potentially causing severe engine damage if not addressed in a timely manner.

Owners have reported a chirping or ticking noise from the high-pressure fuel pump, often described as "cricket noise."

The clutch in the 2013 BRZ can wear out faster than expected, especially under spirited driving conditions.

Some 2013 BRZ models were part of a recall for a faulty fuel pump that could cause the vehicle to stall.

There have been instances where the connecting rod bearings fail, leading to catastrophic engine damage if not caught early.

The Subaru BRZ is known to have higher-than-average oil consumption, which could lead to frequent oil top-ups and potential engine damage if not monitored closely.

Some owners report engine knocking, especially during cold starts or under heavy load, which could indicate issues with the ignition system or fuel quality.

There have been recalls related to valve springs, which can fail and cause engine stalling or damage if not addressed.

Issues with the fuel pump can lead to poor engine performance, stalling, or difficulty starting the vehicle.

Coolant leaks from the radiator or hoses can lead to engine overheating, which can cause significant engine damage if not corrected promptly.

Problems with the timing chain tensioner can lead to a rattling noise in the engine and, if not fixed, potential catastrophic engine failure.

The Subaru BRZ is known to have higher-than-average oil consumption, which could lead to frequent oil top-ups and potential engine damage if not monitored closely.

Some owners report engine knocking, especially during cold starts or under heavy load, which could indicate issues with the ignition system or fuel quality.

There have been recalls related to valve springs, which can fail and cause engine stalling or damage if not addressed.

Issues with the fuel pump can lead to poor engine performance, stalling, or difficulty starting the vehicle.

Coolant leaks from the radiator or hoses can lead to engine overheating, which can cause significant engine damage if not corrected promptly.

Problems with the timing chain tensioner can lead to a rattling noise in the engine and, if not fixed, potential catastrophic engine failure.

A misfire can occur due to issues with spark plugs, ignition coils, or fuel injectors, leading to rough idling or loss of power.

Over time, seals and gaskets may wear out, causing oil leaks which can lead to engine damage if not addressed.

Problems with the timing chain or belt can cause engine performance issues and, in severe cases, engine failure.

Issues such as clogged fuel filters or failing fuel pumps can result in poor engine performance or stalling.

A malfunctioning radiator, water pump, or thermostat can cause the engine to overheat, potentially leading to severe engine damage.

Malfunctions in sensors like the oxygen sensor or mass airflow sensor can cause poor fuel economy and performance issues.

If the engine is turbocharged, problems such as oil contamination or bearing wear can lead to reduced engine performance or failure.

The valve cover gasket may wear out, causing oil leaks that can lead to reduced engine performance or damage.

Misfires in the engine can be caused by various factors including faulty spark plugs, ignition coils, or fuel injectors. This can lead to poor engine performance and reduced fuel efficiency.

Higher-than-normal oil consumption can be a common issue, possibly due to worn piston rings or valve seals, leading to reduced engine performance and potential damage if not addressed.

This can be caused by using the wrong type of fuel, poor engine timing, or issues with the engine's internals such as the bearings or pistons.

Overheating can be due to a malfunctioning cooling system, such as a faulty radiator, thermostat, or water pump, which can lead to serious engine damage if not resolved promptly.

Problems with the timing chain or belt can lead to engine timing issues, which can cause poor performance or even engine failure if the belt or chain breaks.

Issues with the fuel pump or fuel injectors can cause poor engine performance, stalling, or difficulty starting the vehicle.

Problems with the exhaust system, such as a clogged catalytic converter or damaged oxygen sensors, can affect engine performance and emissions.

Issues with the engine's electrical system, such as a faulty alternator or battery, can lead to starting problems or intermittent electrical failures.

Malfunctioning sensors (e.g., mass airflow sensor, oxygen sensor) can lead to incorrect air-fuel mixture, resulting in poor engine performance and increased emissions.

Some 2022 Subaru BRZ models have been reported to consume more engine oil than expected, which can lead to engine damage if not monitored and maintained properly.

The 2.4L engine in the BRZ has been known to experience knocking noises, which could be a result of improper fuel mixture, low-quality fuel, or internal engine issues.

There have been instances of fuel pump failures that can lead to stalling or difficulty starting the engine.

Some users have reported problems with the timing chain tensioner, which can cause noise and potentially lead to timing issues if not addressed.

Coolant leaks have been noted in some vehicles, which can lead to overheating and engine damage if not promptly repaired.

The engine may experience issues with spark plug fouling, which can lead to misfires and poor engine performance.

The 2014 Subaru BRZ is known to have higher than average oil consumption, which can lead to engine problems if not monitored and maintained regularly.

Some models may experience fuel pump issues, which can cause the engine to stall or have difficulty starting.

There was a recall for defective valve springs that could break and cause engine failure.

Owners have reported a ticking noise from the engine, which could be related to valve train issues or insufficient lubrication.

Some BRZs may experience rough idling, often due to issues with the fuel system or engine management.

A common issue where water condensation forms inside the tail light assemblies, potentially causing electrical problems.

The factory-installed batteries in 2014 BRZ models are known to have a shorter lifespan, leading to frequent replacements.

Premature clutch wear and failure have been reported, sometimes requiring early replacement.

The 2014 Subaru BRZ is known to have higher than average oil consumption, which can lead to engine problems if not monitored and maintained regularly.

Some models may experience fuel pump issues, which can cause the engine to stall or have difficulty starting.

There was a recall for defective valve springs that could break and cause engine failure.

Owners have reported a ticking noise from the engine, which could be related to valve train issues or insufficient lubrication.

Some BRZs may experience rough idling, often due to issues with the fuel system or engine management.

A common issue where water condensation forms inside the tail light assemblies, potentially causing electrical problems.

The factory-installed batteries in 2014 BRZ models are known to have a shorter lifespan, leading to frequent replacements.

Premature clutch wear and failure have been reported, sometimes requiring early replacement.

The 2013 Subaru BRZ with a naturally aspirated engine is known to experience higher than normal oil consumption which may require more frequent oil top-ups.

Valve springs can fail prematurely, potentially causing severe engine damage if not addressed in a timely manner.

Owners have reported a chirping or ticking noise from the high-pressure fuel pump, often described as "cricket noise."

The clutch in the 2013 BRZ can wear out faster than expected, especially under spirited driving conditions.

Some 2013 BRZ models were part of a recall for a faulty fuel pump that could cause the vehicle to stall.

There have been instances where the connecting rod bearings fail, leading to catastrophic engine damage if not caught early.

The Subaru BRZ is known to have higher-than-average oil consumption, which could lead to frequent oil top-ups and potential engine damage if not monitored closely.

Some owners report engine knocking, especially during cold starts or under heavy load, which could indicate issues with the ignition system or fuel quality.

There have been recalls related to valve springs, which can fail and cause engine stalling or damage if not addressed.

Issues with the fuel pump can lead to poor engine performance, stalling, or difficulty starting the vehicle.

Coolant leaks from the radiator or hoses can lead to engine overheating, which can cause significant engine damage if not corrected promptly.

Problems with the timing chain tensioner can lead to a rattling noise in the engine and, if not fixed, potential catastrophic engine failure.