The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2002 Subaru Legacy is known for head gasket issues, often leading to coolant leaks and engine overheating.

This model often experiences rear wheel bearing failures, leading to a humming or grinding noise from the affected wheel.

The 2002 Legacy can develop oil leaks from the valve cover gaskets, oil pump, and camshaft seals.

If the timing belt is not replaced at the recommended intervals, it can snap, causing significant engine damage.

The exhaust components, including the muffler and pipes, are prone to rust and corrosion, especially in areas with harsh winter conditions.

Some owners report problems with the automatic transmission, including slipping and harsh shifting.

Worn-out struts and bushings can lead to a rough ride and poor handling.

The 1995 Subaru Legacy is known to suffer from head gasket issues, which can lead to coolant leaks and engine overheating.

Common in older Subaru models, oil leaks can occur around the valve cover gaskets and oil pan gaskets.

The timing belt in the 1995 Legacy needs regular replacement to prevent engine damage, as it can wear out or break over time.

Older Subaru Legacies, including the 1995 model, often experience rust, particularly in the rear quarter panels and undercarriage.

Issues such as faulty alternators, starters, and aging wiring can cause electrical problems in this model year.

Automatic transmissions in the 1995 Legacy can develop shifting problems or failure, especially with high mileage.

This is a known issue for the Subaru Legacy 2006, as the head gaskets can fail, leading to coolant leaks and engine overheating.

The 2006 Subaru Legacy is prone to oil leaks, often from the valve cover gaskets, camshaft seals, and front crankshaft seal.

Owners of this model often report premature wear of the wheel bearings, which can cause noise and vibration.

The catalytic converters on the 2006 Subaru Legacy can fail, leading to reduced engine performance and increased emissions.

The suspension components, particularly the struts and control arm bushings, tend to wear out and may need replacement.

The oxygen sensors can fail, leading to poor fuel economy and increased emissions.

Some owners have reported problems with the automatic transmission, including harsh shifting and transmission fluid leaks.

There can be issues with the electrical system, including problems with the alternator, battery, and wiring connections.

The 2010 Subaru Legacy with the 2.5Turbo U4 engine is known for head gasket issues, often caused by engine overheating or poor gasket material.

This engine model is prone to developing oil leaks, particularly around the valve cover gaskets and camshaft seals.

The turbocharger in the 2.5Turbo U4 can suffer from wear and failure due to high heat and pressure, leading to reduced performance and potential engine damage.

The timing belt in this engine should be regularly inspected and replaced as it can wear out, leading to potential catastrophic engine damage if it snaps.

The cooling system in this vehicle may develop leaks, particularly around the radiator and hoses, which can lead to engine overheating.

The piston rings in the 2.5Turbo U4 may wear out prematurely, causing excessive oil consumption and reduced engine compression.

Spark plugs may foul or wear out quickly, leading to misfires, rough idling, and decreased fuel efficiency.

The oxygen sensors in this engine can fail, causing the check engine light to come on and affecting fuel mixture and emissions control.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

1999 Subaru Legacy models are known for head gasket issues which can lead to coolant leaks and engine overheating.

These vehicles often suffer from oil leaks around the valve cover gaskets, oil pan gaskets, and camshaft seals.

The timing belt requires regular maintenance and replacement to avoid engine damage, as it can wear out over time.

Constant velocity (CV) joints in the drive axles can wear out, leading to clicking noises during turns and potential axle failure.

Wheel bearings can wear out prematurely, causing humming or growling noises from the wheels.

Some 1999 Subaru Legacy owners report issues with the fuel pump, leading to engine stalling or failure to start.

The exhaust system, including the muffler and catalytic converter, is prone to rust and corrosion, especially in regions with harsh winters.

Worn-out suspension components, like struts and control arm bushings, can lead to poor handling and ride quality.

The 2008 Subaru Legacy is known for head gasket issues which can cause coolant leaks, engine overheating, and oil contamination.

Some owners report excessive oil consumption which may require frequent oil top-ups and could indicate underlying engine issues.

Premature wheel bearing wear is a common issue, leading to a humming noise from the wheels and potential safety concerns.

Faulty oxygen sensors can trigger the check engine light and lead to poor fuel economy and increased emissions.

Some models experience transmission issues, such as harsh shifting or slipping, particularly in automatic transmissions.

The suspension components, such as struts and control arms, may wear out prematurely, causing a rough ride and handling issues.

The catalytic converter may fail, leading to decreased engine performance and increased emissions.

Problems with the electrical system, such as faulty wiring or failing alternators, can cause a variety of issues including battery drain and malfunctioning accessories.

The 2002 Subaru Legacy is known for head gasket issues, often leading to coolant leaks and engine overheating.

This model often experiences rear wheel bearing failures, leading to a humming or grinding noise from the affected wheel.

The 2002 Legacy can develop oil leaks from the valve cover gaskets, oil pump, and camshaft seals.

If the timing belt is not replaced at the recommended intervals, it can snap, causing significant engine damage.

The exhaust components, including the muffler and pipes, are prone to rust and corrosion, especially in areas with harsh winter conditions.

Some owners report problems with the automatic transmission, including slipping and harsh shifting.

Worn-out struts and bushings can lead to a rough ride and poor handling.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2008 Subaru Legacy is known for head gasket issues which can cause coolant leaks, engine overheating, and oil contamination.

Some owners report excessive oil consumption which may require frequent oil top-ups and could indicate underlying engine issues.

Premature wheel bearing wear is a common issue, leading to a humming noise from the wheels and potential safety concerns.

Faulty oxygen sensors can trigger the check engine light and lead to poor fuel economy and increased emissions.

Some models experience transmission issues, such as harsh shifting or slipping, particularly in automatic transmissions.

The suspension components, such as struts and control arms, may wear out prematurely, causing a rough ride and handling issues.

The catalytic converter may fail, leading to decreased engine performance and increased emissions.

Problems with the electrical system, such as faulty wiring or failing alternators, can cause a variety of issues including battery drain and malfunctioning accessories.

The 2009 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks and engine overheating if not addressed promptly.

Some 2009 Legacy models experience higher than normal oil consumption, which can lead to engine damage if oil levels are not regularly monitored.

Owners of the 2009 Subaru Legacy have reported premature wheel bearing failures, which can cause noise and potentially affect vehicle handling.

The timing belt in the 2009 Legacy requires regular maintenance and replacement as failure can lead to significant engine damage.

Some drivers have reported issues with the suspension system, including worn-out struts and bushings, which can affect ride comfort and handling.

There have been reports of transmission issues, including rough shifting or slipping, particularly in models with automatic transmissions.

Faulty oxygen sensors are common and can lead to poor fuel efficiency and increased emissions.

Some owners have reported various electrical problems, including issues with the power windows, door locks, and lighting systems.

This is a known issue for the Subaru Legacy 2006, as the head gaskets can fail, leading to coolant leaks and engine overheating.

The 2006 Subaru Legacy is prone to oil leaks, often from the valve cover gaskets, camshaft seals, and front crankshaft seal.

Owners of this model often report premature wear of the wheel bearings, which can cause noise and vibration.

The catalytic converters on the 2006 Subaru Legacy can fail, leading to reduced engine performance and increased emissions.

The suspension components, particularly the struts and control arm bushings, tend to wear out and may need replacement.

The oxygen sensors can fail, leading to poor fuel economy and increased emissions.

Some owners have reported problems with the automatic transmission, including harsh shifting and transmission fluid leaks.

There can be issues with the electrical system, including problems with the alternator, battery, and wiring connections.

Common issue with Subaru engines, especially from this era. Can cause overheating and engine damage.

Often due to worn seals or gaskets, particularly around the valve covers and oil pan.

The timing belt needs regular replacement (typically every 105,000 miles); failure can cause severe engine damage.

Can occur from the radiator, hoses, or water pump, leading to overheating.

Could be due to spark plug, ignition coil, or fuel injector issues, leading to poor engine performance.

Over time, can become clogged or fail, causing reduced engine performance and increased emissions.

Can cause starting issues and poor engine performance.

The 2008 Subaru Legacy is known for head gasket issues which can cause coolant leaks, engine overheating, and oil contamination.

Some owners report excessive oil consumption which may require frequent oil top-ups and could indicate underlying engine issues.

Premature wheel bearing wear is a common issue, leading to a humming noise from the wheels and potential safety concerns.

Faulty oxygen sensors can trigger the check engine light and lead to poor fuel economy and increased emissions.

Some models experience transmission issues, such as harsh shifting or slipping, particularly in automatic transmissions.

The suspension components, such as struts and control arms, may wear out prematurely, causing a rough ride and handling issues.

The catalytic converter may fail, leading to decreased engine performance and increased emissions.

Problems with the electrical system, such as faulty wiring or failing alternators, can cause a variety of issues including battery drain and malfunctioning accessories.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2010 Subaru Legacy with the 2.5Turbo U4 engine is known for head gasket issues, often caused by engine overheating or poor gasket material.

This engine model is prone to developing oil leaks, particularly around the valve cover gaskets and camshaft seals.

The turbocharger in the 2.5Turbo U4 can suffer from wear and failure due to high heat and pressure, leading to reduced performance and potential engine damage.

The timing belt in this engine should be regularly inspected and replaced as it can wear out, leading to potential catastrophic engine damage if it snaps.

The cooling system in this vehicle may develop leaks, particularly around the radiator and hoses, which can lead to engine overheating.

The piston rings in the 2.5Turbo U4 may wear out prematurely, causing excessive oil consumption and reduced engine compression.

Spark plugs may foul or wear out quickly, leading to misfires, rough idling, and decreased fuel efficiency.

The oxygen sensors in this engine can fail, causing the check engine light to come on and affecting fuel mixture and emissions control.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.

The 2005 Subaru Legacy is known for head gasket issues, which can lead to coolant leaks, oil leaks, and overheating problems.

Some 2005 Subaru Legacy vehicles have been reported to consume excessive amounts of oil, which can lead to engine damage if not monitored regularly.

For turbocharged models, there can be issues with the turbocharger failing, leading to loss of power and potential engine damage.

Owners have reported premature wheel bearing failures, which can cause noise and unsafe driving conditions if not addressed.

Both manual and automatic transmissions can exhibit problems such as slipping, difficulty shifting, or complete failure, especially in higher mileage vehicles.

The CV joints and axles are prone to wear and can lead to clicking noises while turning and eventual failure if not replaced.

Particularly in areas with harsh winters, the 2005 Subaru Legacy can experience rust and corrosion, especially on the undercarriage and wheel wells.

Components such as struts and control arms may wear out prematurely, leading to a rough ride and poor handling.

The oxygen sensors in this model can fail, leading to poor fuel economy and increased emissions.

Problems with the electrical system, such as faulty alternators and battery drain, have been reported by owners.