Most Common Car Issues

Selected parameters

Other Engine Info
L-9, DFI, TC

Add more parameters

MOST COMMON PROBLEMS

MERCEDES-BENZ SLC-Class 2017

The 2017 MERCEDES-BENZ AMG SLC43 is a high-performance, rear-wheel-drive passenger car featuring a powerful 3.0L V6 engine with 362 horsepower. It includes standard safety features like Dynamic Brake Support (DBS), Anti-lock Braking System (ABS), and Automatic Crash Notification (ACN). The vehicle is equipped with advanced options such as Lane Departure Warning (LDW) and Blind Spot Warning (BSW). With seating for two, this sporty model also boasts a 9-speed automatic transmission and a stylish design.

Spec:

Dynamic Brake Support (DBS)
Standard
Engine Brake (hp) From
362
Engine Configuration
V-Shaped
Engine Manufacturer
Daimler
Engine Model
M276
Engine Number of Cylinders
6
Engine Stroke Cycles
4
Other Engine Info
L-9, DFI, TC

Problems:

Oil leaks
The M276 engine is known to develop oil leaks from various seals and gaskets, which can lead to reduced performance and potential engine damage if not addressed.
Timing chain issues
The timing chains on the M276 engine can stretch over time, causing poor engine performance and potentially leading to costly repairs if they fail.
Turbocharger problems
Given the engine's turbocharged configuration, issues such as turbo lag, boost leaks, or even turbocharger failure can occur, leading to reduced power and efficiency.
Carbon buildup
Direct Fuel Injection (DFI) engines like the M276 can suffer from carbon buildup on intake valves, which can lead to rough idling, misfires, and decreased fuel efficiency.
Cooling system failures
The cooling system in this engine can develop leaks or the water pump may fail, which can lead to overheating and severe engine damage.
Fuel injector issues
Fuel injectors can become clogged or fail, causing misfires, poor fuel economy, and rough engine operation.
Electronic sensor failures
Various electronic sensors such as the MAF (Mass Air Flow), O2 (Oxygen), and MAP (Manifold Absolute Pressure) sensors can fail, leading to incorrect fuel mixture and poor engine performance.
Crankshaft position sensor failure
A failing crankshaft position sensor can cause the engine to stall or not start at all, as it is crucial for ignition timing.
Exhaust gas recirculation (egr) valve problems
The EGR valve can become clogged or fail, leading to increased emissions, rough idling, and decreased fuel economy.
Misfire issues
With a V6 configuration, misfires can occur due to ignition coil failures, spark plug issues, or air/fuel mixture problems, affecting engine smoothness and performance.
MERCEDES-BENZ C-Class 2017

The 2017 Mercedes-Benz AMG C43 is a high-performance passenger car equipped with a 3.0L V6 engine producing 362 hp. It features AWD, a 9-speed transmission, and a range of safety options including Dynamic Brake Support, Forward Collision Warning, and Blind Spot Warning as standard. Optional features include Lane Departure Warning, Adaptive Cruise Control, and Pedestrian Automatic Emergency Braking. The car seats 4 with advanced restraint systems and comes with an 18-inch wheel size.

Spec:

Dynamic Brake Support (DBS)
Standard
Engine Brake (hp) From
362
Engine Configuration
V-Shaped
Engine Manufacturer
Daimler
Engine Model
M276
Engine Number of Cylinders
6
Engine Stroke Cycles
4
Other Engine Info
L-9, DFI, TC

Problems:

Dynamic brake support (dbs) malfunction
The DBS may fail to engage properly, leading to reduced braking efficiency during emergency stops.
Oil leaks
The V-shaped engine configuration can sometimes result in oil leaks from the valve cover gaskets or oil pan.
Timing chain issues
The M276 engine has been known to experience timing chain stretch, which can lead to engine misfires and poor performance.
Turbocharger failure
Since the engine is turbocharged (TC), there is a potential for the turbocharger to fail, causing a loss of power and increased exhaust emissions.
Direct fuel injection (dfi) carbon buildup
The DFI system can lead to carbon buildup on the intake valves, reducing engine performance and fuel efficiency.
Cooling system problems
The complex V-shaped engine design can sometimes lead to cooling system issues, such as radiator or water pump failures.
Sensor malfunctions
The advanced electronics in the C-Class, especially in the 2017 model year, can sometimes lead to sensor failures, affecting engine management and performance.
Engine knocking
The 4-stroke cycle engine may experience knocking if not properly maintained or if using low-quality fuel, leading to potential engine damage.
Exhaust gas recirculation (egr) issues
The EGR system may become clogged or malfunction, leading to increased emissions and reduced engine performance.
MERCEDES-BENZ C-Class 2017

The 2017 Mercedes-Benz AMG C43 is a high-performance passenger car equipped with a 3.0L V6 engine producing 362 hp. It features standard safety systems like Dynamic Brake Support, Forward Collision Warning, and Blind Spot Warning. Optional features include Lane Departure Warning, Adaptive Cruise Control, and Parking Assist. This 2-door, 4-seat vehicle offers all-wheel drive and a 9-speed transmission, ensuring a dynamic and secure driving experience.

Spec:

Dynamic Brake Support (DBS)
Standard
Engine Brake (hp) From
362
Engine Configuration
V-Shaped
Engine Manufacturer
Daimler
Engine Model
M276
Engine Number of Cylinders
6
Engine Stroke Cycles
4
Other Engine Info
L-9, DFI, TC

Problems:

Dynamic brake support (dbs) malfunction
The DBS may fail to engage properly, leading to reduced braking efficiency during emergency stops.
Oil leaks
The V-shaped engine configuration can sometimes result in oil leaks from the valve cover gaskets or oil pan.
Timing chain issues
The M276 engine has been known to experience timing chain stretch, which can lead to engine misfires and poor performance.
Turbocharger failure
Since the engine is turbocharged (TC), there is a potential for the turbocharger to fail, causing a loss of power and increased exhaust emissions.
Direct fuel injection (dfi) carbon buildup
The DFI system can lead to carbon buildup on the intake valves, reducing engine performance and fuel efficiency.
Cooling system problems
The complex V-shaped engine design can sometimes lead to cooling system issues, such as radiator or water pump failures.
Sensor malfunctions
The advanced electronics in the C-Class, especially in the 2017 model year, can sometimes lead to sensor failures, affecting engine management and performance.
Engine knocking
The 4-stroke cycle engine may experience knocking if not properly maintained or if using low-quality fuel, leading to potential engine damage.
Exhaust gas recirculation (egr) issues
The EGR system may become clogged or malfunction, leading to increased emissions and reduced engine performance.
MERCEDES-BENZ C-Class 2020

The 2020 Mercedes-Benz AMG C43 is a high-performance passenger car featuring a 3.0L V6 engine with 385 hp. It offers standard safety features like ABS, Traction Control, and Blind Spot Warning. The vehicle includes modern amenities such as Adaptive Cruise Control, Pedestrian Automatic Emergency Braking, and a Backup Camera. With a base price of $58,500, it's designed for luxury and performance.

Spec:

Dynamic Brake Support (DBS)
Not Available
Engine Brake (hp) From
385
Engine Configuration
V-Shaped
Engine Manufacturer
Daimler
Engine Model
M276
Engine Number of Cylinders
6
Engine Stroke Cycles
4
Other Engine Info
L-9, DFI, TC

Problems:

Dynamic brake support (dbs) not available
The vehicle lacks Dynamic Brake Support, which could affect braking efficiency in emergency situations when additional braking force is needed.
Potential turbocharger issues
Since the engine is turbocharged (TC), it may face common turbocharger problems such as turbo lag, oil contamination, or compressor failure.
High maintenance costs
Mercedes-Benz vehicles, especially those with advanced engine configurations like the V-shaped M276, typically have higher maintenance and repair costs.
Complex engine configuration
The V-shaped engine configuration can make some repairs more complex and time-consuming compared to inline engines, potentially leading to higher labor costs.
Fuel efficiency concerns
High-performance engines like the M276 with 385 hp may have lower fuel efficiency, which could be a concern for cost-conscious drivers.
Electronic system failures
Modern Mercedes-Benz vehicles are equipped with advanced electronic systems that could fail and require specialized diagnostic and repair tools.
Issues with direct fuel injection (dfi)
Engines with Direct Fuel Injection can face issues such as carbon buildup on intake valves, which may require regular cleaning or more frequent maintenance.
Engine overheating
High-performance engines are more prone to overheating, especially if not maintained properly or driven aggressively.
Cylinder deactivation problems
If the engine has cylinder deactivation technology (not specified, but possible), it could face issues like uneven engine performance or increased wear on the remaining active cylinders.
High repair costs for engine components
Daimler engines and parts tend to be expensive, which can lead to higher repair costs if major components fail.
MERCEDES-BENZ C-Class 2018

The 2018 MERCEDES-BENZ AMG C43 is a high-performance passenger car featuring a 3.0L V6 engine that delivers 362 hp. It comes standard with safety features like Dynamic Brake Support (DBS), Forward Collision Warning (FCW), and a Backup Camera. The vehicle offers optional Adaptive Driving Beam (ADB), Adaptive Cruise Control (ACC), and Pedestrian Automatic Emergency Braking (PAEB). With a base price of $55,900, it accommodates five passengers and includes advanced features like Electronic Stability Control (ESC) and a Tire Pressure Monitoring System (TPMS).

Spec:

Dynamic Brake Support (DBS)
Standard
Engine Brake (hp) From
362
Engine Configuration
V-Shaped
Engine Manufacturer
Daimler
Engine Model
M276
Engine Number of Cylinders
6
Engine Stroke Cycles
4
Other Engine Info
L-9, DFI, TC

Problems:

Dynamic brake support (dbs) malfunction
DBS may not engage properly, leading to reduced braking assistance during emergency situations.
Engine misfire
Misfires can occur due to issues with spark plugs, fuel injectors, or ignition coils, leading to rough idling and reduced performance.
Oil leaks
Common in V-shaped engines, oil leaks may occur from valve covers, oil pan, or other seals, leading to reduced oil levels and potential engine damage.
Turbocharger issues
The turbocharger (TC) may fail or underperform due to issues like oil starvation, bearing wear, or contamination, causing reduced engine power and efficiency.
Direct fuel injection (dfi) problems
DFI systems can suffer from carbon buildup on intake valves, leading to poor fuel economy and reduced engine performance.
Cooling system failures
Problems with the cooling system, such as radiator or water pump failures, can lead to engine overheating and potential engine damage.
Timing chain wear
Over time, the timing chain may stretch or wear, causing timing issues, engine noise, and potential engine failure if not addressed.
Electronic issues
Modern engines with complex electronic systems can suffer from software glitches or sensor failures, leading to engine performance issues or warning lights.
© Copyright 2024 VinCyp.com Privacy Policy
VIN Decoder (vincyp.com) does not guarantee the accuracy of provided information, including technical data, features, specifications, indicators, etc. All manufacturers' logos, brands, and trademarks are the property of their respective owners.