The 2012 Dodge Challenger with an 8-cylinder engine is known for higher oil consumption, which can lead to more frequent oil changes and potential engine damage if not monitored.

This model can experience camshaft wear, which may result in poor engine performance and misfires.

Timing chain tensioners may fail, causing the timing chain to become loose and potentially leading to engine damage if not addressed.

The engine might develop a ticking noise known as the "Hemi tick," often attributed to the lifters and the design of the engine.

The 2012 Challenger may suffer from coolant leaks, particularly around the water pump, which can cause overheating if not repaired.

This model can have issues with fouling spark plugs, leading to misfires and decreased engine efficiency.

Hydraulic brake systems rely on brake fluid to transfer force; leaks can lead to reduced braking efficiency.

Consistent use wears down brake pads and rotors, leading to decreased braking performance and potential damage.

ABS sensors and modules can malfunction, causing the system to fail and reducing braking safety.

With 8 cylinders, issues such as faulty spark plugs, ignition coils, or fuel injectors can cause one or more cylinders to misfire.

Common in older models, oil leaks can occur from gaskets, seals, or the oil pan, leading to engine damage over time.

Cooling system issues such as a failing water pump, clogged radiator, or thermostat failure can cause the engine to overheat.

Problems like slipping gears, rough shifting, or transmission fluid leaks can occur, especially in older vehicles.

Faulty wiring or failing sensors can lead to various electrical problems, including issues with the engine control unit (ECU).

Cracks or gasket failures in the exhaust manifold can cause exhaust leaks, reducing engine performance and increasing emissions.

Problems such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and reduced fuel efficiency.

The 2012 Dodge Challenger with an 8-cylinder engine is known for higher oil consumption, which can lead to more frequent oil changes and potential engine damage if not monitored.

This model can experience camshaft wear, which may result in poor engine performance and misfires.

Timing chain tensioners may fail, causing the timing chain to become loose and potentially leading to engine damage if not addressed.

The engine might develop a ticking noise known as the "Hemi tick," often attributed to the lifters and the design of the engine.

The 2012 Challenger may suffer from coolant leaks, particularly around the water pump, which can cause overheating if not repaired.

This model can have issues with fouling spark plugs, leading to misfires and decreased engine efficiency.

2012 Dodge Chargers with a V8 engine are known to have issues with high oil consumption, which can lead to engine damage if not monitored regularly.

The timing chain in these models can become loose or even break, leading to significant engine damage and costly repairs.

Many owners have reported premature alternator failure, which can cause the battery to die and the car to stall unexpectedly.

Issues with the cooling system, including radiator and water pump failures, can lead to overheating and potential engine damage.

The 5.7L Hemi V8 engines sometimes develop a ticking noise, often referred to as the "Hemi tick," which can be due to lifter or camshaft issues.

These models are also known to have fuel injector issues, which can lead to rough idling, misfires, and poor fuel economy.

Hydraulic brake systems rely on brake fluid to transfer force; leaks can lead to reduced braking efficiency.

Consistent use wears down brake pads and rotors, leading to decreased braking performance and potential damage.

ABS sensors and modules can malfunction, causing the system to fail and reducing braking safety.

With 8 cylinders, issues such as faulty spark plugs, ignition coils, or fuel injectors can cause one or more cylinders to misfire.

Common in older models, oil leaks can occur from gaskets, seals, or the oil pan, leading to engine damage over time.

Cooling system issues such as a failing water pump, clogged radiator, or thermostat failure can cause the engine to overheat.

Problems like slipping gears, rough shifting, or transmission fluid leaks can occur, especially in older vehicles.

Faulty wiring or failing sensors can lead to various electrical problems, including issues with the engine control unit (ECU).

Cracks or gasket failures in the exhaust manifold can cause exhaust leaks, reducing engine performance and increasing emissions.

Problems such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and reduced fuel efficiency.

Hydraulic brake systems rely on fluid to transfer force, and leaks can lead to reduced braking efficiency.

Over time, brake pads and rotors wear down, leading to decreased stopping power and potential damage to other components.

Problems such as a soft or spongy brake pedal can indicate air in the brake lines or a failing master cylinder.

The anti-lock braking system can experience sensor failures or other issues, causing the ABS light to illuminate and potentially affecting braking performance.

An engine with 8 cylinders can generate a lot of heat, and issues with the cooling system can lead to overheating and potential engine damage.

Issues like faulty spark plugs, ignition coils, or fuel injectors can cause one or more of the cylinders to misfire, leading to rough running and reduced power.

High oil consumption can indicate worn piston rings or valve seals, leading to lower performance and potential engine damage.

If the timing chain or belt fails or is improperly tensioned, it can lead to engine performance issues and potentially catastrophic engine damage.

Problems with the fuel pump, injectors, or filter can lead to poor fuel delivery, causing reduced performance and efficiency.

In V8 engines, the exhaust manifold can develop cracks, leading to exhaust leaks and potential engine performance issues.

Hydraulic brake systems rely on brake fluid to transfer force; leaks can lead to reduced braking efficiency.

Consistent use wears down brake pads and rotors, leading to decreased braking performance and potential damage.

ABS sensors and modules can malfunction, causing the system to fail and reducing braking safety.

With 8 cylinders, issues such as faulty spark plugs, ignition coils, or fuel injectors can cause one or more cylinders to misfire.

Common in older models, oil leaks can occur from gaskets, seals, or the oil pan, leading to engine damage over time.

Cooling system issues such as a failing water pump, clogged radiator, or thermostat failure can cause the engine to overheat.

Problems like slipping gears, rough shifting, or transmission fluid leaks can occur, especially in older vehicles.

Faulty wiring or failing sensors can lead to various electrical problems, including issues with the engine control unit (ECU).

Cracks or gasket failures in the exhaust manifold can cause exhaust leaks, reducing engine performance and increasing emissions.

Problems such as clogged fuel injectors or a failing fuel pump can lead to poor engine performance and reduced fuel efficiency.

The 2012 Chrysler 300 with a V8 engine is known to have issues with excessive oil consumption, which can lead to engine damage if not monitored regularly.

This model may experience camshaft phaser failures, causing rough idling, stalling, and poor engine performance.

The timing chain tensioner can fail, leading to timing chain slack and potential engine damage.

Radiator and water pump failures are common, causing overheating and potential engine damage.

Ignition coil and spark plug issues can lead to engine misfires, resulting in decreased performance and fuel efficiency.

The Exhaust Gas Recirculation (EGR) valve can get clogged or fail, causing rough idling and reduced fuel efficiency.

Faulty fuel injectors can lead to poor fuel delivery, causing rough engine performance and reduced fuel economy.

Throttle body failures can cause acceleration problems and rough idling.

The 2012 Dodge Challenger with an 8-cylinder engine is known for higher oil consumption, which can lead to more frequent oil changes and potential engine damage if not monitored.

This model can experience camshaft wear, which may result in poor engine performance and misfires.

Timing chain tensioners may fail, causing the timing chain to become loose and potentially leading to engine damage if not addressed.

The engine might develop a ticking noise known as the "Hemi tick," often attributed to the lifters and the design of the engine.

The 2012 Challenger may suffer from coolant leaks, particularly around the water pump, which can cause overheating if not repaired.

This model can have issues with fouling spark plugs, leading to misfires and decreased engine efficiency.